Raspberry Pi Model 3 B+ Benchmarks vs. ARM SBCs vs. x86

Raspberry Pi 3 Model B Plus benchmarks by Michael Larabel for a future article on Phoronix.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1803229-FO-MODEL3BPL15
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

C/C++ Compiler Tests 7 Tests
CPU Massive 9 Tests
Creator Workloads 4 Tests
Multi-Core 5 Tests
Programmer / Developer System Benchmarks 2 Tests
Renderers 2 Tests
Server 5 Tests
Server CPU Tests 6 Tests
Single-Threaded 8 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Disable Color Branding
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
View Logs
Performance Per
Dollar
Date
Run
  Test
  Duration
Raspberry Pi 2 Model B
March 19 2018
 
Raspberry Pi 3 Model B
March 21 2018
 
Raspberry Pi 3 Model B+
March 21 2018
 
ASUS TinkerBoard
March 20 2018
 
ODROID-C2
March 21 2018
 
Pine A64
March 20 2018
 
Jetson TX1
March 21 2018
 
Jetson TX2
March 21 2018
 
Orange Pi PC v1.2
March 20 2018
 
Celeron N2820
March 20 2018
 
Celeron J3455
March 20 2018
 
Core i3 8100
March 20 2018
 
Invert Hiding All Results Option
 

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Raspberry Pi 2 Model B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 926MB, Disk: 32GB GB2MW, Graphics: VC4 V3D 2.1 1024MB, Monitor: VE228

OS: Raspbian 9.4, Kernel: 4.9.80-v7+ (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 2.1 Mesa 13.0.6 Gallium 0.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 Model B

Changed Processor to ARMv7 rev 4 @ 1.20GHz (4 Cores).

Changed Motherboard to BCM2835 Raspberry Pi 3 Model B Rev 1.2.

Raspberry Pi 3 Model B+

Changed Processor to ARMv7 rev 4 @ 1.40GHz (4 Cores).

Changed Motherboard to BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3.

ASUS TinkerBoard

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 8GB SD, Graphics: LLVMpipe, Monitor: VE228

OS: Debian 9.4, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 3.3 Mesa 13.0.6 Gallium 0.4 (LLVM 3.9 128 bits), Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

ODROID-C2

Processor: Unknown @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Ubuntu 16.04, Kernel: 3.14.79-108 (aarch64), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 12.0.6 Gallium 0.4 (LLVM 3.8 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: meson_cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Pine A64

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 8GB SL08G, Graphics: LLVMpipe

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 11.2.0 Gallium 0.4 (LLVM 3.8 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 3.10.96-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 24.2.1, OpenGL: 4.5.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609 + CUDA 8.0, File-System: ext4, Screen Resolution: 1920x1080

Environment Notes: __GL_PERFMON_MODE=1
Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX2

Processor: ARMv8 rev 3 @ 2.00GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: GP10B, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.15-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 27.1.0, OpenGL: 4.5.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609 + CUDA 8.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Python Notes: Python 2.7.12 + Python 3.5.2

Orange Pi PC v1.2

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 32GB GB2MW

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand
Python Notes: Python 2.7.3 + Python 3.2.3

Celeron N2820

Processor: Intel Celeron N2820 @ 2.40GHz (2 Cores), Motherboard: Intel DN2820FYK (FYBYT10H.86A.0050.2015.0326.1731 BIOS), Chipset: Intel Atom Z36xxx/Z37xxx, Memory: 8192MB, Disk: 60GB OCZ VERTEX2, Graphics: Intel Bay Trail 1536MB (756MHz), Audio: Realtek ALC283, Monitor: DELL P2415Q, Network: Realtek RTL8111/8168/8411 + Intel Wireless 7260

OS: Ubuntu 18.04, Kernel: 4.15.0-10-generic (x86_64), Desktop: GNOME Shell 3.27.91, Display Driver: modesetting 1.19.6, OpenGL: 4.2 Mesa 18.0.0-rc4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 2048x1280

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14+ + Python 3.6.4+
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline Protection

Celeron J3455

Processor: Intel Celeron J3455 @ 2.30GHz (4 Cores), Motherboard: Compulab fitlet2 v1.1 (FLT2.0.38.01.00 BIOS), Chipset: Intel Celeron N3350/Pentium, Memory: 8192MB, Disk: 127GB NT-128, Graphics: Intel HD 500 3072MB (750MHz), Audio: Realtek ALC1150, Monitor: DELL P2415Q, Network: Intel I211 Gigabit Connection + Intel Wireless 8260

OS: Ubuntu 18.04, Kernel: 4.15.0-10-generic (x86_64), Desktop: GNOME Shell 3.27.91, Display Driver: modesetting 1.19.6, OpenGL: 4.5 Mesa 18.0.0-rc4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Core i3 8100

Processor: Intel Core i3-8100 @ 3.60GHz (4 Cores), Motherboard: ASRock Z370M-ITX/ac (P1.20 BIOS), Chipset: Intel Device 3e1f, Memory: 8192MB, Disk: 60GB DREVO X1 SSD, Graphics: (1100MHz), Audio: Realtek ALC892, Network: Intel Connection + Intel Device 24fb

OS: Ubuntu 17.10, Kernel: 4.15.0-999-generic (x86_64) 20171231, Desktop: GNOME Shell 3.26.1, Compiler: GCC 8.0.1 20180319, File-System: ext4

Compiler Notes: --disable-multilib --enable-checking=release --enable-languages=c,c++,fortran
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14 + Python 3.6.3

Raspberry Pi Model 3 B+ Benchmarks vs. ARM SBCs vs. x86ProcessorMotherboardMemoryDiskGraphicsMonitorChipsetAudioNetworkOSKernelDesktopDisplay ServerDisplay DriverOpenGLCompilerFile-SystemScreen ResolutionVulkanRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1926MB32GB GB2MWVC4 V3D 2.1 1024MBVE228Raspbian 9.44.9.80-v7+ (armv7l)LXDE 0.9.3X Server 1.19.2modesetting 1.19.22.1 Mesa 13.0.6 Gallium 0.4GCC 6.3.0 20170516ext41920x1080ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.2ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB8GB SDLLVMpipeDebian 9.44.4.16-00006-g4431f98-dirty (armv7l)3.3 Mesa 13.0.6 Gallium 0.4 (LLVM 3.9 128 bits)Unknown @ 1.54GHz (4 Cores)ODROID-C216GB SD16GUbuntu 16.043.14.79-108 (aarch64)MATE 1.12.1X Server 1.18.43.3 Mesa 12.0.6 Gallium 0.4 (LLVM 3.8 128 bits)GCC 5.4.0 20160609AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB8GB SL08G3.10.104 (aarch64)3.3 Mesa 11.2.0 Gallium 0.4 (LLVM 3.8 128 bits)ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA Tegra X1DELL P2415Q3.10.96-tegra (aarch64)Unity 7.4.0X Server 1.18.3NVIDIA 24.2.14.5.01.0.8GCC 5.4.0 20160609 + CUDA 8.0ARMv8 rev 3 @ 2.00GHz (6 Cores)quill8192MB31GB 032G34GP10B4.4.15-tegra (aarch64)NVIDIA 27.1.0ARMv7 rev 5 @ 1.20GHz (3 Cores)sun8i1024MB32GB GB2MWRaspbian GNU/Linux 73.4.39 (armv7l)LXDE 0.7.1X Server 1.12.4GCC 4.6.31280x720Intel Celeron N2820 @ 2.40GHz (2 Cores)Intel DN2820FYK (FYBYT10H.86A.0050.2015.0326.1731 BIOS)Intel Atom Z36xxx/Z37xxx8192MB60GB OCZ VERTEX2Intel Bay Trail 1536MB (756MHz)Realtek ALC283DELL P2415QRealtek RTL8111/8168/8411 + Intel Wireless 7260Ubuntu 18.044.15.0-10-generic (x86_64)GNOME Shell 3.27.91modesetting 1.19.64.2 Mesa 18.0.0-rc4GCC 7.3.02048x1280Intel Celeron J3455 @ 2.30GHz (4 Cores)Compulab fitlet2 v1.1 (FLT2.0.38.01.00 BIOS)Intel Celeron N3350/Pentium127GB NT-128Intel HD 500 3072MB (750MHz)Realtek ALC1150Intel I211 Gigabit Connection + Intel Wireless 82604.5 Mesa 18.0.0-rc41920x1080Intel Core i3-8100 @ 3.60GHz (4 Cores)ASRock Z370M-ITX/ac (P1.20 BIOS)Intel Device 3e1f60GB DREVO X1 SSD(1100MHz)Realtek ALC892Intel Connection + Intel Device 24fbUbuntu 17.104.15.0-999-generic (x86_64) 20171231GNOME Shell 3.26.1GCC 8.0.1 20180319OpenBenchmarking.orgCompiler Details- Raspberry Pi 2 Model B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Raspberry Pi 3 Model B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Raspberry Pi 3 Model B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - ASUS TinkerBoard: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v - ODROID-C2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine A64: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Orange Pi PC v1.2: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Celeron N2820: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Celeron J3455: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Core i3 8100: --disable-multilib --enable-checking=release --enable-languages=c,c++,fortranProcessor Details- Raspberry Pi 2 Model B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model B+: Scaling Governor: BCM2835 Freq ondemand- ASUS TinkerBoard: Scaling Governor: cpufreq-dt interactive- ODROID-C2: Scaling Governor: meson_cpufreq interactive- Pine A64: Scaling Governor: cpufreq-sunxi interactive- Jetson TX1: Scaling Governor: tegra interactive- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- Orange Pi PC v1.2: Scaling Governor: cpufreq-sunxi ondemand- Celeron N2820: Scaling Governor: intel_pstate powersave- Celeron J3455: Scaling Governor: intel_pstate powersave- Core i3 8100: Scaling Governor: intel_pstate powersavePython Details- Raspberry Pi 2 Model B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model B+: Python 2.7.13 + Python 3.5.3- ASUS TinkerBoard: Python 2.7.13 + Python 3.5.3- ODROID-C2: Python 2.7.12 + Python 3.5.2- Pine A64: Python 2.7.12 + Python 3.5.2- Jetson TX1: Python 2.7.12 + Python 3.5.2- Jetson TX2: Python 2.7.12 + Python 3.5.2- Orange Pi PC v1.2: Python 2.7.3 + Python 3.2.3- Celeron N2820: Python 2.7.14+ + Python 3.6.4+- Celeron J3455: Python 2.7.14+ + Python 3.6.4+- Core i3 8100: Python 2.7.14 + Python 3.6.3Environment Details- Jetson TX1: __GL_PERFMON_MODE=1Security Details- Celeron N2820, Celeron J3455: KPTI + __user pointer sanitization + Full generic retpoline Protection

Raspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100Logarithmic Result OverviewPhoronix Test SuiteC-RayebizzyPHPBenchCacheBenchRedisStockfishGitPyBenchSciMarkPerl BenchmarksLAME MP3 EncodingAOBench

Raspberry Pi Model 3 B+ Benchmarks vs. ARM SBCs vs. x86scimark2: Compositescimark2: Monte Carloscimark2: Fast Fourier Transformscimark2: Sparse Matrix Multiplyscimark2: Dense LU Matrix Factorizationscimark2: Jacobi Successive Over-Relaxationcachebench: Readcachebench: Writeencode-mp3: WAV To MP3stockfish: Total Timeaobench: 2048 x 2048 - Total Timegraphics-magick: Resizingc-ray: Total Timenetperf: 192.168.1.55 - TCP Send File - 10 Secondsnetperf: 192.168.1.55 - TCP Stream - Client To Server - 10 Secondsnetperf: 192.168.1.55 - TCP Stream - Server To Client - 10 Secondsnetperf: 192.168.1.55 - UDP Stream - Server To Client - 10G - 10 Secondsopenssl: RSA 4096-bit Performancephpbench: PHP Benchmark Suiteredis: GETredis: SETebizzy: perl-benchmark: Pod2htmlperl-benchmark: Interpretergit: Time To Complete Common Git Commandspybench: Total For Average Test TimesRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 810025.6613.999.2619.5531.4754.041657.432238.20513.4368581668.6019490.4593.5494.0593.5896.0225.7720952112559.0666149.3045002.457806460.01265626106.883820041.7421.2813.8035.7253.3884.521794.553012.71351.9836549333.7529239.9993.8994.0594.0096.0052.8734682178668.50131098.0576221.340277810.0070159369.852438048.4524.8115.5641.0262.1098.792101.883494.79301.7931658285.7133222.75321.61226.59322.32272.7829.7740392245707.42154508.1281021.164408760.0061930165.7820841139.6640.9321.26112.89168.10355.132734.618813.66145.6119893192.1255155.40938.85783.73939.90634.1985.4265900315325.94216013.27192000.713104430.0041059429.57927350.6128.1215.4639.5665.43104.492308.243847.46271.7822868271.76187.5481.5047423256306.45172011.6649141.130250500.0053356080.451512439.4521.5912.7531.6750.1281.091696.002829.53350.3831725353.89277.1960.4336986258184.77161471.7145561.420368210.01063092162.1520338155.3746.5636.92139.14205.74348.492637.896438.86112.7013136165.5862102.57109.33110745511506.28342885.98229770.593429060.0118108324.896375167.3850.8337.09144.77228.98375.192802.876956.18104.1311581144.907288.38120469644758.94413680.94318650.539501710.0082467119.36580831.9018.3411.3622.9439.7067.152196.392983.31400.2252564654.65151421.6194.2094.1494.1996.1616.8713383107875.3364242.1439182.139849660.0094156375.0524555125.9352.4425.79141.07158.34252.011958.618769.95124.3812859190.1052252.32938.88787.16938.88959.5556.57141192426838.06335119.1351270.670225590.0033281121.525912195.3250.9344.83220.67191.92468.251935.3410270.0085.638852109.238671.83938.86786.12938.86959.56215.57208375733499.05601592.6491970.452045290.0040234315.874215562.39121.61201.86653.78813.801020.903047.6125255.8833.59338744.8718721.61941.39787.50941.30961.581056.935370783264425.582158315.832114170.132023310.000951085.731445OpenBenchmarking.org

SciMark

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: CompositeRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100120240360480600SE +/- 0.00, N = 3SE +/- 0.02, N = 3SE +/- 0.25, N = 3SE +/- 1.66, N = 3SE +/- 0.86, N = 3SE +/- 0.12, N = 3SE +/- 0.46, N = 3SE +/- 0.29, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.04, N = 3SE +/- 0.02, N = 325.6641.7448.45139.6650.6139.45155.37167.3831.90125.93195.32562.391. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Monte CarloRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100306090120150SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.09, N = 3SE +/- 0.50, N = 3SE +/- 0.39, N = 3SE +/- 0.08, N = 3SE +/- 0.16, N = 3SE +/- 0.05, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.08, N = 313.9921.2824.8140.9328.1221.5946.5650.8318.3452.4450.93121.611. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Fast Fourier TransformRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81004080120160200SE +/- 0.00, N = 3SE +/- 0.14, N = 3SE +/- 0.07, N = 3SE +/- 0.05, N = 3SE +/- 0.19, N = 3SE +/- 0.17, N = 3SE +/- 0.01, N = 3SE +/- 0.04, N = 3SE +/- 0.02, N = 3SE +/- 0.09, N = 3SE +/- 0.02, N = 3SE +/- 0.14, N = 39.2613.8015.5621.2615.4612.7536.9237.0911.3625.7944.83201.861. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Sparse Matrix MultiplyRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100140280420560700SE +/- 0.01, N = 3SE +/- 0.04, N = 3SE +/- 0.22, N = 3SE +/- 3.08, N = 3SE +/- 0.70, N = 3SE +/- 0.31, N = 3SE +/- 0.78, N = 3SE +/- 0.11, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.14, N = 3SE +/- 0.06, N = 319.5535.7241.02112.8939.5631.67139.14144.7722.94141.07220.67653.781. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Dense LU Matrix FactorizationRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81002004006008001000SE +/- 0.01, N = 3SE +/- 0.04, N = 3SE +/- 0.36, N = 3SE +/- 2.61, N = 3SE +/- 1.23, N = 3SE +/- 0.98, N = 3SE +/- 1.99, N = 3SE +/- 0.82, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.11, N = 3SE +/- 0.25, N = 331.4753.3862.10168.1065.4350.12205.74228.9839.70158.34191.92813.801. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Jacobi Successive Over-RelaxationRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81002004006008001000SE +/- 0.01, N = 3SE +/- 0.03, N = 3SE +/- 0.55, N = 3SE +/- 2.17, N = 3SE +/- 1.82, N = 3SE +/- 0.73, N = 3SE +/- 0.36, N = 3SE +/- 0.56, N = 3SE +/- 0.08, N = 3SE +/- 0.05, N = 3SE +/- 0.11, N = 3SE +/- 0.08, N = 354.0484.5298.79355.13104.4981.09348.49375.1967.15252.01468.251020.901. (CC) gcc options: -lm

CacheBench

OpenBenchmarking.orgMB/s, More Is BetterCacheBenchTest: ReadRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81007001400210028003500SE +/- 6.59, N = 3SE +/- 1.76, N = 3SE +/- 4.05, N = 3SE +/- 7.48, N = 3SE +/- 2.22, N = 3SE +/- 14.20, N = 3SE +/- 3.38, N = 3SE +/- 45.23, N = 4SE +/- 20.69, N = 3SE +/- 38.99, N = 3SE +/- 0.36, N = 3SE +/- 3.20, N = 31657.431794.552101.882734.612308.241696.002637.892802.872196.391958.611935.343047.611. (CC) gcc options: -lrt

OpenBenchmarking.orgMB/s, More Is BetterCacheBenchTest: WriteRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81005K10K15K20K25KSE +/- 0.58, N = 3SE +/- 0.05, N = 3SE +/- 12.95, N = 3SE +/- 28.35, N = 3SE +/- 0.02, N = 3SE +/- 32.22, N = 3SE +/- 0.46, N = 3SE +/- 8.80, N = 3SE +/- 5.72, N = 3SE +/- 6.16, N = 3SE +/- 5.31, N = 3SE +/- 1.03, N = 32238.203012.713494.798813.663847.462829.536438.866956.182983.318769.9510270.0025255.881. (CC) gcc options: -lrt

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3Raspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100110220330440550SE +/- 0.03, N = 3SE +/- 0.25, N = 3SE +/- 0.55, N = 3SE +/- 0.06, N = 3SE +/- 4.56, N = 3SE +/- 0.11, N = 3SE +/- 0.08, N = 3SE +/- 0.23, N = 3SE +/- 0.26, N = 3SE +/- 0.03, N = 3SE +/- 0.06, N = 3SE +/- 0.00, N = 3513.43351.98301.79145.61271.78350.38112.70104.13400.22124.3885.6333.591. (CC) gcc options: -lm

Stockfish

OpenBenchmarking.orgms, Fewer Is BetterStockfish 2014-11-26Total TimeRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 810015K30K45K60K75KSE +/- 845.64, N = 3SE +/- 76.51, N = 3SE +/- 56.64, N = 3SE +/- 372.92, N = 6SE +/- 387.61, N = 4SE +/- 290.41, N = 3SE +/- 47.03, N = 3SE +/- 49.11, N = 3SE +/- 246.35, N = 3SE +/- 5.13, N = 3SE +/- 13.58, N = 3SE +/- 2.33, N = 36858136549316581989322868317251313611581525641285988523387-msse -msse3 -mpopcnt-msse -msse3 -mpopcnt1. (CXX) g++ options: -lpthread -fno-exceptions -fno-rtti -ansi -pedantic -O3 -flto

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100140280420560700SE +/- 1.11, N = 3SE +/- 0.57, N = 3SE +/- 0.49, N = 3SE +/- 0.10, N = 3SE +/- 3.74, N = 3SE +/- 0.42, N = 3SE +/- 0.14, N = 3SE +/- 0.11, N = 3SE +/- 0.16, N = 3SE +/- 0.08, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3668.60333.75285.71192.12271.76353.89165.58144.90654.65190.10109.2344.871. (CC) gcc options: -lm -O3

GraphicsMagick

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.28Operation: ResizingRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardJetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81004080120160200SE +/- 0.33, N = 3SE +/- 0.67, N = 3SE +/- 0.33, N = 3192933556272155286187-lgomp-lgomp-lgomp-lgomp-ljpeg -lpng12 -lXext -lSM -lICE -lX11 -lxml2 -lgomp-ljpeg -lpng12 -lXext -lSM -lICE -lX11 -lxml2 -lgomp-std=gnu99 -lgomp-lXext -lSM -lICE -lX11 -lgomp-lXext -lSM -lICE -lX11 -lgomp-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -ldl1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lpthread

C-Ray

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total TimeRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 810030060090012001500SE +/- 0.93, N = 3SE +/- 1.56, N = 3SE +/- 1.59, N = 3SE +/- 1.29, N = 3SE +/- 0.92, N = 3SE +/- 1.63, N = 3SE +/- 7.80, N = 6SE +/- 10.79, N = 6SE +/- 6.71, N = 3SE +/- 0.04, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3490.45239.99222.75155.40187.54277.19102.5788.381421.61252.3271.8321.611. (CC) gcc options: -lm -lpthread -O3

Netperf

Netperf is a network bandwidth testing software. This test profile is used for automated testing of a netperf client and requires you have access to a netperf server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMegabits/sec Throughput, More Is BetterNetperf 2.7.0Server: 192.168.1.55 - Test: TCP Send File - Duration: 10 SecondsRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardOrange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81002004006008001000SE +/- 0.05, N = 3SE +/- 0.08, N = 3SE +/- 0.09, N = 3SE +/- 0.93, N = 3SE +/- 0.01, N = 3SE +/- 0.30, N = 3SE +/- 0.12, N = 3SE +/- 0.04, N = 393.5493.89321.61938.8594.20938.88938.86941.39-march=native-march=native-march=native-march=native-march=native1. (CC) gcc options: -O3 -lm

OpenBenchmarking.orgMegabits/sec Throughput, More Is BetterNetperf 2.7.0Server: 192.168.1.55 - Test: TCP Stream - Client To Server - Duration: 10 SecondsRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardOrange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81002004006008001000SE +/- 0.05, N = 3SE +/- 0.04, N = 3SE +/- 0.25, N = 3SE +/- 0.80, N = 3SE +/- 0.00, N = 3SE +/- 0.60, N = 3SE +/- 0.99, N = 3SE +/- 0.13, N = 394.0594.05226.59783.7394.14787.16786.12787.50-march=native-march=native-march=native-march=native-march=native1. (CC) gcc options: -O3 -lm

OpenBenchmarking.orgMegabits/sec Throughput, More Is BetterNetperf 2.7.0Server: 192.168.1.55 - Test: TCP Stream - Server To Client - Duration: 10 SecondsRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardOrange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81002004006008001000SE +/- 0.22, N = 3SE +/- 0.06, N = 3SE +/- 0.14, N = 3SE +/- 0.89, N = 3SE +/- 0.01, N = 3SE +/- 0.03, N = 3SE +/- 0.09, N = 3SE +/- 0.02, N = 393.5894.00322.32939.9094.19938.88938.86941.30-march=native-march=native-march=native-march=native-march=native1. (CC) gcc options: -O3 -lm

OpenBenchmarking.orgMegabits/sec Throughput, More Is BetterNetperf 2.7.0Server: 192.168.1.55 - Test: UDP Stream - Server To Client - 10G - Duration: 10 SecondsRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardOrange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81002004006008001000SE +/- 0.03, N = 3SE +/- 0.14, N = 3SE +/- 1.51, N = 3SE +/- 161.98, N = 6SE +/- 0.03, N = 3SE +/- 0.33, N = 3SE +/- 0.25, N = 3SE +/- 0.00, N = 396.0296.00272.78634.1996.16959.55959.56961.58-march=native-march=native-march=native-march=native-march=native1. (CC) gcc options: -O3 -lm

OpenSSL

OpenSSL is an open-source toolkit that implements SSL (Secure Sockets Layer) and TLS (Transport Layer Security) protocols. This test measures the RSA 4096-bit performance of OpenSSL. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSigns Per Second, More Is BetterOpenSSL 1.1.0fRSA 4096-bit PerformanceRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81002004006008001000SE +/- 0.03, N = 3SE +/- 1.86, N = 6SE +/- 0.03, N = 3SE +/- 3.22, N = 6SE +/- 0.06, N = 3SE +/- 0.64, N = 3SE +/- 0.24, N = 3SE +/- 0.03, N = 3SE +/- 0.09, N = 3SE +/- 0.20, N = 3SE +/- 0.15, N = 325.7752.8729.7785.4281.5060.43109.3316.8756.57215.571056.93-m64-m641. (CC) gcc options: -O3 -pthread -lssl -lcrypto -ldl

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100120K240K360K480K600KSE +/- 114.02, N = 3SE +/- 39.18, N = 3SE +/- 55.25, N = 3SE +/- 49.03, N = 3SE +/- 625.53, N = 3SE +/- 7.80, N = 3SE +/- 682.38, N = 3SE +/- 256.97, N = 3SE +/- 11.79, N = 3SE +/- 71.72, N = 3SE +/- 342.93, N = 3SE +/- 365.01, N = 320952346824039265900474233698611074512046913383141192208375537078

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100700K1400K2100K2800K3500KSE +/- 560.95, N = 3SE +/- 2202.38, N = 3SE +/- 940.39, N = 3SE +/- 2325.31, N = 3SE +/- 857.57, N = 3SE +/- 2618.64, N = 3SE +/- 4628.81, N = 3SE +/- 2098.75, N = 3SE +/- 1373.57, N = 3SE +/- 4492.02, N = 3SE +/- 997.32, N = 3SE +/- 3548.42, N = 3112559.06178668.50245707.42315325.94256306.45258184.77511506.28644758.94107875.33426838.06733499.053264425.581. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100500K1000K1500K2000K2500KSE +/- 495.26, N = 3SE +/- 1414.83, N = 3SE +/- 972.61, N = 3SE +/- 2568.46, N = 3SE +/- 2790.78, N = 3SE +/- 2887.44, N = 3SE +/- 2230.70, N = 3SE +/- 636.08, N = 3SE +/- 1036.24, N = 3SE +/- 2444.94, N = 3SE +/- 6734.69, N = 3SE +/- 6761.21, N = 366149.30131098.05154508.12216013.27172011.66161471.71342885.98413680.9464242.14335119.13601592.642158315.831. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

ebizzy

This is a test of ebizzy, a program to generate workloads resembling web server workloads. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRecords/s, More Is Betterebizzy 0.3Raspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 810050K100K150K200K250KSE +/- 8.89, N = 3SE +/- 49.17, N = 3SE +/- 47.17, N = 3SE +/- 220.50, N = 3SE +/- 4.73, N = 3SE +/- 194.60, N = 6SE +/- 1266.17, N = 6SE +/- 896.20, N = 6SE +/- 112.53, N = 6SE +/- 12.12, N = 3SE +/- 25.58, N = 3SE +/- 296.45, N = 345007622810219200491445562297731865391851279197211417-march=native-march=native1. (CC) gcc options: -pthread -lpthread -O3

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81000.5531.1061.6592.2122.765SE +/- 0.00655717, N = 3SE +/- 0.00197500, N = 3SE +/- 0.00441133, N = 3SE +/- 0.01896498, N = 6SE +/- 0.02597362, N = 6SE +/- 0.00367742, N = 3SE +/- 0.00299646, N = 3SE +/- 0.00279271, N = 3SE +/- 0.03956969, N = 6SE +/- 0.00045652, N = 3SE +/- 0.00054440, N = 3SE +/- 0.00061183, N = 32.457806461.340277811.164408760.713104431.130250501.420368210.593429060.539501712.139849660.670225590.452045290.13202331

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81000.00280.00560.00840.01120.014SE +/- 0.00001921, N = 3SE +/- 0.00008168, N = 3SE +/- 0.00010890, N = 3SE +/- 0.00009055, N = 6SE +/- 0.00000285, N = 3SE +/- 0.00000996, N = 3SE +/- 0.00013674, N = 3SE +/- 0.00001889, N = 3SE +/- 0.00007243, N = 3SE +/- 0.00004880, N = 3SE +/- 0.00001924, N = 3SE +/- 0.00005500, N = 60.012656260.007015930.006193010.004105940.005335600.010630920.011810830.008246710.009415630.003328110.004023430.00095108

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81004080120160200SE +/- 5.53, N = 6SE +/- 2.24, N = 6SE +/- 4.17, N = 6SE +/- 3.14, N = 6SE +/- 8.61, N = 6SE +/- 2.46, N = 5SE +/- 0.88, N = 6SE +/- 0.69, N = 6SE +/- 2.09, N = 6SE +/- 0.36, N = 6SE +/- 0.22, N = 6SE +/- 0.02, N = 3106.8869.8565.7829.5780.45162.1524.8919.3675.0521.5215.875.731. Raspberry Pi 2 Model B: git version 2.11.02. Raspberry Pi 3 Model B: git version 2.11.03. Raspberry Pi 3 Model B+: git version 2.11.04. ASUS TinkerBoard: git version 2.11.05. ODROID-C2: git version 2.7.46. Pine A64: git version 2.7.47. Jetson TX1: git version 2.7.48. Jetson TX2: git version 2.7.49. Orange Pi PC v1.2: git version 1.7.10.410. Celeron N2820: git version 2.15.111. Celeron J3455: git version 2.15.112. Core i3 8100: git version 2.14.1

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+ASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 81008K16K24K32K40KSE +/- 113.95, N = 3SE +/- 52.45, N = 3SE +/- 11.46, N = 3SE +/- 17.24, N = 3SE +/- 22.24, N = 3SE +/- 25.48, N = 3SE +/- 4.81, N = 3SE +/- 7.22, N = 3SE +/- 51.60, N = 3SE +/- 4.33, N = 3SE +/- 13.91, N = 3SE +/- 6.23, N = 3382002438020841927315124203386375580824555591242151445

Raspberry Pi 2 Model B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 926MB, Disk: 32GB GB2MW, Graphics: VC4 V3D 2.1 1024MB, Monitor: VE228

OS: Raspbian 9.4, Kernel: 4.9.80-v7+ (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 2.1 Mesa 13.0.6 Gallium 0.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 19 March 2018 20:08 by user pi.

Raspberry Pi 3 Model B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 926MB, Disk: 32GB GB2MW, Graphics: VC4 V3D 2.1 1024MB, Monitor: VE228

OS: Raspbian 9.4, Kernel: 4.9.80-v7+ (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 2.1 Mesa 13.0.6 Gallium 0.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 21 March 2018 22:59 by user pi.

Raspberry Pi 3 Model B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: VC4 V3D 2.1 1024MB, Monitor: VE228

OS: Raspbian 9.4, Kernel: 4.9.80-v7+ (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 2.1 Mesa 13.0.6 Gallium 0.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 21 March 2018 17:55 by user pi.

ASUS TinkerBoard

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 8GB SD, Graphics: LLVMpipe, Monitor: VE228

OS: Debian 9.4, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 3.3 Mesa 13.0.6 Gallium 0.4 (LLVM 3.9 128 bits), Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 20 March 2018 12:31 by user linaro.

ODROID-C2

Processor: Unknown @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Ubuntu 16.04, Kernel: 3.14.79-108 (aarch64), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 12.0.6 Gallium 0.4 (LLVM 3.8 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: meson_cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 21 March 2018 09:06 by user odroid.

Pine A64

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 8GB SL08G, Graphics: LLVMpipe

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 11.2.0 Gallium 0.4 (LLVM 3.8 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 20 March 2018 23:03 by user ubuntu.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 3.10.96-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 24.2.1, OpenGL: 4.5.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609 + CUDA 8.0, File-System: ext4, Screen Resolution: 1920x1080

Environment Notes: __GL_PERFMON_MODE=1
Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 21 March 2018 13:53 by user ubuntu.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.00GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: GP10B, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.15-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 27.1.0, OpenGL: 4.5.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609 + CUDA 8.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 21 March 2018 12:17 by user NVIDIA.

Orange Pi PC v1.2

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 32GB GB2MW

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand
Python Notes: Python 2.7.3 + Python 3.2.3

Testing initiated at 20 March 2018 17:14 by user root.

Celeron N2820

Processor: Intel Celeron N2820 @ 2.40GHz (2 Cores), Motherboard: Intel DN2820FYK (FYBYT10H.86A.0050.2015.0326.1731 BIOS), Chipset: Intel Atom Z36xxx/Z37xxx, Memory: 8192MB, Disk: 60GB OCZ VERTEX2, Graphics: Intel Bay Trail 1536MB (756MHz), Audio: Realtek ALC283, Monitor: DELL P2415Q, Network: Realtek RTL8111/8168/8411 + Intel Wireless 7260

OS: Ubuntu 18.04, Kernel: 4.15.0-10-generic (x86_64), Desktop: GNOME Shell 3.27.91, Display Driver: modesetting 1.19.6, OpenGL: 4.2 Mesa 18.0.0-rc4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 2048x1280

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14+ + Python 3.6.4+
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline Protection

Testing initiated at 20 March 2018 19:13 by user phoronix.

Celeron J3455

Processor: Intel Celeron J3455 @ 2.30GHz (4 Cores), Motherboard: Compulab fitlet2 v1.1 (FLT2.0.38.01.00 BIOS), Chipset: Intel Celeron N3350/Pentium, Memory: 8192MB, Disk: 127GB NT-128, Graphics: Intel HD 500 3072MB (750MHz), Audio: Realtek ALC1150, Monitor: DELL P2415Q, Network: Intel I211 Gigabit Connection + Intel Wireless 8260

OS: Ubuntu 18.04, Kernel: 4.15.0-10-generic (x86_64), Desktop: GNOME Shell 3.27.91, Display Driver: modesetting 1.19.6, OpenGL: 4.5 Mesa 18.0.0-rc4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14+ + Python 3.6.4+
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline Protection

Testing initiated at 20 March 2018 17:35 by user phoronix.

Core i3 8100

Processor: Intel Core i3-8100 @ 3.60GHz (4 Cores), Motherboard: ASRock Z370M-ITX/ac (P1.20 BIOS), Chipset: Intel Device 3e1f, Memory: 8192MB, Disk: 60GB DREVO X1 SSD, Graphics: (1100MHz), Audio: Realtek ALC892, Network: Intel Connection + Intel Device 24fb

OS: Ubuntu 17.10, Kernel: 4.15.0-999-generic (x86_64) 20171231, Desktop: GNOME Shell 3.26.1, Compiler: GCC 8.0.1 20180319, File-System: ext4

Compiler Notes: --disable-multilib --enable-checking=release --enable-languages=c,c++,fortran
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14 + Python 3.6.3

Testing initiated at 20 March 2018 16:12 by user phoronix.