Various ARM Linux Benchmarks - Spetember 2018

Various ARM board benchmarks... Tests for a future article on Phoronix.com by Michael Larabel.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1809186-RA-1809111RA60
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Audio Encoding 2 Tests
C/C++ Compiler Tests 8 Tests
Compression Tests 2 Tests
CPU Massive 14 Tests
Creator Workloads 6 Tests
Database Test Suite 2 Tests
Encoding 3 Tests
Common Kernel Benchmarks 2 Tests
Multi-Core 8 Tests
Programmer / Developer System Benchmarks 3 Tests
Python 2 Tests
Renderers 3 Tests
Server 4 Tests
Server CPU Tests 8 Tests
Single-Threaded 8 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
ALL-H3-CC H2+
September 04 2018
  11 Hours, 9 Minutes
ALL-H3-CC H3
September 04 2018
  13 Hours, 14 Minutes
ALL-H3-CC H5
September 04 2018
  13 Hours, 49 Minutes
AML-S905X-CC Le Potato
September 03 2018
  6 Hours, 58 Minutes
Banana Pi M3
September 06 2018
  6 Hours, 50 Minutes
Firefly ROC-RK3328-CC
September 03 2018
  6 Hours, 22 Minutes
Jetson TX1
September 10 2018
  5 Hours, 24 Minutes
Jetson TX2
August 28 2018
  3 Hours, 12 Minutes
ODROID-C1+
September 06 2018
  10 Hours, 14 Minutes
ODROID-C2
August 31 2018
  6 Hours
Pine64 1GB
August 31 2018
  8 Hours, 8 Minutes
Raspberry Pi 2 B
August 27 2018
  14 Hours, 22 Minutes
Raspberry Pi 3 B
August 31 2018
  9 Hours, 37 Minutes
Raspberry Pi 3 B+
August 27 2018
  7 Hours, 52 Minutes
Socionext Developerbox
August 24 2018
  5 Hours, 6 Minutes
Tinker Board
August 31 2018
  4 Hours, 10 Minutes
RockPro64
September 17 2018
  6 Hours, 33 Minutes
Invert Hiding All Results Option
  8 Hours, 11 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):


Various ARM Linux Benchmarks - Spetember 2018ProcessorMotherboardMemoryDiskMonitorGraphicsAudioOSKernelCompilerFile-SystemScreen ResolutionDisplay ServerDesktopDisplay DriverVulkanALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro64ARMv7 rev 5 @ 0.91GHz (4 Cores)Allwinner sun8i Family Libre Board ALL-H3-CC H3493MB32GB SC32GVE228Ubuntu 18.044.14.65-sunxi (armv7l)GCC 7.3.0ext41920x10801024MB32GB GB1QTARMVv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H52048MBRaspbian 9.44.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2GCC 6.3.0 20170516Unknown @ 1.51GHz (4 Cores)Libre Board AML-S905X-CC32GB SC32GAcer P243W4.14.53-00653-gc01abe8ba6bc (aarch64)LXDE1920x1200ARMv7 rev 5 @ 1.80GHz (8 Cores)sun8i32GB SC32G + 8GB M8G1GCPowerVRRaspbian 8.03.4.39-BPI-M3-Kernel (armv7l)X Server 1.18.4GCC 4.9.21280x720Rockchip @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CC32GB GB1QTAcer P243WUbuntu 18.044.4.114 (aarch64)GCC 7.3.01920x1080p60ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA TEGRAUbuntu 16.044.4.38-tegra (aarch64)Unity 7.4.5NVIDIA 1.0.01.0.8GCC 5.4.0 201606091920x1200ARMv8 rev 3 @ 2.04GHz (6 Cores)quill8192MB31GB 032G34DELL P2415Q3840x2160ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC804MB32GB GB1QTARM Mali3.10.107-190 (armv7l)1920x2160Amlogic @ 1.54GHz (4 Cores)ODROID-C22048MBOSDUbuntu 18.043.16.57-20 (aarch64)X Server 1.19.6GCC 7.3.01920x1200AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SC32GUbuntu 16.043.10.104 (aarch64)X Server 1.18.4GCC 5.4.0 201606091920x1080ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1927MB32GB GB2MWBCM2708Raspbian 9.44.14.50-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 201705161920x1200ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.232GB GB1QT4.14.62-v7+ (armv7l)656x416ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.332GB GB2MW1920x1200Unknown (24 Cores)Socionext SynQuacer E- DeveloperBox (build #38 BIOS)32768MB8GB M32508 + 1000GB Samsung SSD 970 EVO 1TBASUS NVIDIA GeForce GT 710B 1024MBNVIDIA GK208 HDMI/DPASUS VG236Ubuntu 18.044.15.0-33-generic (aarch64)GCC 7.3.01920x1080ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTAcer P243WDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 20170516SiFive RISC-V @ 1.42GHz (6 Cores)Pine64 RockPro644096MB2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32GLG TVArch Linux ARM4.18.0-rc8-1 (aarch64)X Server 1.20.1GCC 8.2.0OpenBenchmarking.orgCompiler Details- ALL-H3-CC H2+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H3: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- AML-S905X-CC Le Potato: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Banana Pi M3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- ODROID-C1+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Pine64 1GB: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Raspberry Pi 2 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Socionext Developerbox: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v- RockPro64: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnuProcessor Details- ALL-H3-CC H2+: Scaling Governor: cpufreq-dt ondemand- ALL-H3-CC H3: Scaling Governor: cpufreq-dt ondemand- AML-S905X-CC Le Potato: Scaling Governor: arm-big-little ondemand- Banana Pi M3: Scaling Governor: sunxi-iks ondemand- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- Jetson TX1: Scaling Governor: tegra-cpufreq interactive- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- ODROID-C1+: Scaling Governor: meson_cpufreq performance- ODROID-C2: Scaling Governor: meson_cpufreq performance- Pine64 1GB: Scaling Governor: cpufreq-sunxi interactive- Raspberry Pi 2 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B+: Scaling Governor: BCM2835 Freq ondemand- Tinker Board: Scaling Governor: cpufreq-dt interactive- RockPro64: Scaling Governor: cpufreq-dt ondemandPython Details- ALL-H3-CC H2+: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H3: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- AML-S905X-CC Le Potato: Python 2.7.13 + Python 3.5.3- Banana Pi M3: Python 2.7.9 + Python 3.4.2- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5- Jetson TX1: Python 2.7.12 + Python 3.5.2- Jetson TX2: Python 2.7.12 + Python 3.5.2- ODROID-C1+: Python 2.7.12 + Python 3.5.2- ODROID-C2: Python 2.7.15rc1 + Python 3.6.5- Pine64 1GB: Python 2.7.12 + Python 3.5.2- Raspberry Pi 2 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B+: Python 2.7.13 + Python 3.5.3- Socionext Developerbox: Python 2.7.15rc1 + Python 3.6.5- Tinker Board: Python 2.7.13 + Python 3.5.3- RockPro64: Python 3.7.0Disk Mount Options Details- Jetson TX2: data=ordered,relatime,rw- ODROID-C2: errors=remount-ro,noatime,rw- Pine64 1GB: data=ordered,noatime,rw,stripe=1024- Raspberry Pi 2 B: data=ordered,noatime,rw- Raspberry Pi 3 B: data=ordered,noatime,rw- Raspberry Pi 3 B+: data=ordered,noatime,rw- Tinker Board: data=ordered,noatime,rwDisk Details- Socionext Developerbox: NONE / data=ordered,errors=remount-ro,relatime,rw

ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro64Result OverviewPhoronix Test Suite100%353%607%860%1113%PyBenchFLAC Audio EncodingPerl BenchmarksPHPBenchLAME MP3 EncodingTinymembenchAOBenchZstd CompressionHierarchical INTegrationC-Ray

Various ARM Linux Benchmarks - Spetember 2018ttsiod-renderer: Phong Rendering With Soft-Shadow Mappingx264: H.264 Video Encodingtinymembench: Standard Memcpycompress-7zip: Compress Speed Testhint: FLOATredis: GETredis: SETphpbench: PHP Benchmark Suitepgbench: Buffer Test - Normal Load - Read Onlypgbench: Buffer Test - Normal Load - Read Writepybench: Total For Average Test Timesc-ray: Total Time - 4K, 16 Rays Per Pixelprimesieve: 1e12 Prime Number Generationaobench: 2048 x 2048 - Total Timecompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19encode-flac: WAV To FLACencode-mp3: WAV To MP3perl-benchmark: Pod2htmlperl-benchmark: Interpretergit: Time To Complete Common Git Commandsscikit-learn: ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro6410.731.138271162346378802662229409416619756981407537.27535.902.273662230.0101216591.8310.831.149121197346403332664229389415619407001383537.42536.622.266156290.0101096587.37224611.91133913013400372054779379272132440680308816234911219566.38518.512.575798690.0105771877.19151520.30209522095912138810295371525378555502603228761755891282808334.63300.961.493777500.0077608054.4195473826546793537112421579881182021599016698764611069279.92266.352.596381130.034732452212.121566195161129612265608189623538022977263140301773934289848293.37296.201.313661230.0051476140.0465045.055.963862452688381313484688333535111979160791222634885140116544178.86113.140.600710340.0023586923.6643437985650103988087660813432278133175144271793535767513445565.1595.910.487469040.0098703117.5714.151.469281477557298811673461005613405251993452377327201591457978344.23331.011.731624180.0081423169.23163123.072.891688219867673261271547194581591766059719127751537599260822263.28266.801.118933610.0055119338.9966415.732.121377501852042555461598103698845554562019623429433521034352.20350.191.404496210.0102578652.6485310.941.109561125359526601131116721020836385613337907437518976671315534.59514.112.465045750.0134515597.32232815.662.0312971863500091352130671317643442066404092434923571543333934387.09352.661.294479020.0084208457.1984416.822.0912881796579571932407611503374016565261442092320741113290867336.07301.981.118339730.0074290151.8478589.2812.4115439368441503762357211600533892231506416619386391133400931390.76406.391.570880610.0065884046.3789927.804.4215023472807553253263512187476639813309114292561048192573122.05145.590.694156800.0042808126.064741836.80292394934888.59319017.45219557.437130411587.65114.9252111250.15235.07807.52240.79276.180.924795940.00849475152.55OpenBenchmarking.org

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingSocionext DeveloperboxJetson TX1Tinker BoardODROID-C2AML-S905X-CC Le PotatoRaspberry Pi 3 B+Pine64 1GBRaspberry Pi 3 BODROID-C1+ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H3ALL-H3-CC H2+20406080100SE +/- 0.07, N = 3SE +/- 0.07, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.03, N = 3SE +/- 0.05, N = 3SE +/- 0.25, N = 4SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 389.2845.0527.8023.0720.3016.8215.7315.6614.1511.9110.9410.8310.731. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

OpenBenchmarking.orgFPS Per Dollar, More Is BetterTTSIOD 3D Renderer 2.3bPerformance / Cost - Phong Rendering With Soft-Shadow MappingTinker BoardRaspberry Pi 3 BAML-S905X-CC Le PotatoALL-H3-CC H2+Raspberry Pi 3 B+ODROID-C2ALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Jetson TX1Socionext Developerbox0.11030.22060.33090.44120.55150.490.450.450.430.420.370.360.300.290.090.071. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. AML-S905X-CC Le Potato: $45.00 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. Raspberry Pi 3 B+: $39.78 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Jetson TX1: $476.99 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-07-28Performance / Cost - H.264 Video EncodingTinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+ODROID-C2ALL-H3-CC H2+Firefly ROC-RK3328-CCALL-H3-CC H3ODROID-C1+Socionext DeveloperboxJetson TX10.0180.0360.0540.0720.090.080.060.050.050.050.040.040.030.010.011. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. ODROID-C2: $62.95 reported cost.5. ALL-H3-CC H2+: $25.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C1+: $49.00 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Jetson TX1: $476.99 reported cost.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-07-28H.264 Video EncodingSocionext DeveloperboxJetson TX1Tinker BoardODROID-C2Pine64 1GBFirefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 B3691215SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.05, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 312.415.964.422.892.122.122.092.031.461.141.131.101. (CC) gcc options: -ldl -lm -lpthread

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyJetson TX1Jetson TX2AML-S905X-CC Le PotatoRockPro64ODROID-C2Firefly ROC-RK3328-CCSocionext DeveloperboxTinker BoardPine64 1GBALL-H3-CC H5Raspberry Pi 3 BRaspberry Pi 3 B+Raspberry Pi 2 BODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M380016002400320040003862.003798.002095.001836.801688.001566.001543.001502.001377.001339.001297.001288.00956.00928.00912.00827.00738.001. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetJetson TX2Jetson TX1RockPro64Socionext DeveloperboxFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoTinker BoardODROID-C2Pine64 1GBODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+ALL-H3-CC H5Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BBanana Pi M33K6K9K12K15K13913.0010374.008265.807359.007336.005535.004192.003604.003093.002881.002278.002277.002193.001871.001738.001177.001064.001. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemcpyAML-S905X-CC Le PotatoRaspberry Pi 3 BALL-H3-CC H5ALL-H3-CC H2+Raspberry Pi 3 B+Firefly ROC-RK3328-CCALL-H3-CC H3ODROID-C2Tinker BoardODROID-C1+Jetson TX1Jetson TX2Socionext Developerbox112233445546.5637.0733.4833.0832.3831.3230.4026.8126.4218.948.106.911.291. AML-S905X-CC Le Potato: $45.00 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. Raspberry Pi 3 B+: $39.78 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Tinker Board: $56.85 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX1: $476.99 reported cost.12. Jetson TX2: $549.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestSocionext DeveloperboxJetson TX2Jetson TX1Tinker BoardRockPro64Banana Pi M3AML-S905X-CC Le PotatoODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 BRaspberry Pi 3 B+ODROID-C1+ALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 B2K4K6K8K10KSE +/- 58.09, N = 3SE +/- 11.46, N = 3SE +/- 28.68, N = 3SE +/- 36.57, N = 3SE +/- 85.04, N = 6SE +/- 43.13, N = 9SE +/- 4.16, N = 3SE +/- 17.25, N = 3SE +/- 0.67, N = 3SE +/- 3.84, N = 3SE +/- 16.51, N = 3SE +/- 13.74, N = 3SE +/- 1.20, N = 3SE +/- 1.45, N = 3SE +/- 8.84, N = 393685650452634722923265422092198195118631796147713011197116211251. (CXX) g++ options: -pipe -lpthread

OpenBenchmarking.orgMIPS Per Dollar, More Is Better7-Zip Compression 16.02Performance / Cost - Compress Speed TestTinker BoardRaspberry Pi 3 BAML-S905X-CC Le PotatoALL-H3-CC H2+Raspberry Pi 3 B+ALL-H3-CC H3Firefly ROC-RK3328-CCODROID-C2ALL-H3-CC H5ODROID-C1+Jetson TX2Jetson TX1Socionext Developerbox142842567061.0753.2449.0946.4845.1539.9039.0234.9232.5330.1410.279.497.811. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. AML-S905X-CC Le Potato: $45.00 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. Raspberry Pi 3 B+: $39.78 reported cost.6. ALL-H3-CC H3: $30.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Hierarchical INTegration

This test runs the U.S. Department of Energy's Ames Laboratory Hierarchical INTegration (HINT) benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgQUIPs, More Is BetterHierarchical INTegration 1.0Test: FLOATJetson TX2RockPro64Jetson TX1Tinker BoardBanana Pi M3ODROID-C2Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoRaspberry Pi 3 B+ODROID-C1+Pine64 1GBRaspberry Pi 3 BSocionext DeveloperboxRaspberry Pi 2 BALL-H3-CC H3ALL-H3-CC H2+ALL-H3-CC H520M40M60M80M100MSE +/- 187708.64, N = 3SE +/- 9860994.78, N = 6SE +/- 466387.18, N = 3SE +/- 3664.18, N = 3SE +/- 132627.22, N = 3SE +/- 19085.92, N = 3SE +/- 19531.90, N = 3SE +/- 7375.88, N = 3SE +/- 271590.74, N = 3SE +/- 359364.97, N = 3SE +/- 27122.74, N = 3SE +/- 73922.97, N = 3SE +/- 3286.77, N = 3SE +/- 113633.28, N = 3SE +/- 1696.71, N = 3SE +/- 1621.71, N = 3SE +/- 9829.94, N = 3103988087.0094934888.5988381313.0080755325.0067935371.0067673261.0061129612.0059121388.0057957193.0055729881.0050185204.0050009135.0044150376.0035952660.0034640333.0034637880.0034003720.001. (CC) gcc options: -O3 -march=native -lm

OpenBenchmarking.orgQUIPs Per Dollar, More Is BetterHierarchical INTegration 1.0Performance / Cost - Test: FLOATRaspberry Pi 3 B+Raspberry Pi 3 BTinker BoardALL-H3-CC H2+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCALL-H3-CC H3ODROID-C1+ODROID-C2ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox300K600K900K1200K1500K1456943.011429240.781420498.241385515.201313808.621222592.241154677.771137344.511075031.95850093.00189072.69185289.6636791.981. Raspberry Pi 3 B+: $39.78 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Tinker Board: $56.85 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C1+: $49.00 reported cost.9. ODROID-C2: $62.95 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETJetson TX2Jetson TX1Tinker BoardRockPro64ODROID-C2Firefly ROC-RK3328-CCPine64 1GBRaspberry Pi 3 B+Socionext DeveloperboxRaspberry Pi 3 BODROID-C1+Banana Pi M3Raspberry Pi 2 BAML-S905X-CC Le PotatoALL-H3-CC H5140K280K420K560K700KSE +/- 2540.60, N = 3SE +/- 2915.59, N = 3SE +/- 4435.65, N = 3SE +/- 3406.66, N = 3SE +/- 777.10, N = 3SE +/- 3573.20, N = 6SE +/- 3541.46, N = 3SE +/- 1090.67, N = 3SE +/- 2599.96, N = 3SE +/- 1229.44, N = 3SE +/- 1992.94, N = 12SE +/- 1833.04, N = 3SE +/- 1911.33, N = 3SE +/- 263.42, N = 3SE +/- 336.63, N = 3660813.00484688.00326351.00319017.45271547.00265608.00255546.00240761.00235721.00213067.00167346.00124215.00113111.00102953.0054779.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETJetson TX2Jetson TX1RockPro64Tinker BoardODROID-C2Firefly ROC-RK3328-CCSocionext DeveloperboxPine64 1GBRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C1+Banana Pi M3AML-S905X-CC Le PotatoRaspberry Pi 2 BALL-H3-CC H590K180K270K360K450KSE +/- 436.19, N = 3SE +/- 3890.46, N = 3SE +/- 512.69, N = 3SE +/- 2798.54, N = 3SE +/- 2273.51, N = 3SE +/- 335.35, N = 3SE +/- 368.39, N = 3SE +/- 1081.64, N = 3SE +/- 677.69, N = 3SE +/- 881.60, N = 3SE +/- 1526.07, N = 5SE +/- 1043.53, N = 3SE +/- 405.28, N = 3SE +/- 744.95, N = 3SE +/- 313.11, N = 3432278.00333535.00219557.43218747.00194581.00189623.00160053.00159810.00150337.00131764.00100561.0079881.0071525.0067210.0037927.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: GETRaspberry Pi 3 BRaspberry Pi 3 B+Tinker BoardFirefly ROC-RK3328-CCODROID-C2ODROID-C1+AML-S905X-CC Le PotatoALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox130026003900520065006089.376052.315740.565312.164313.693415.222287.841369.481201.501016.14196.431. Raspberry Pi 3 B: $34.99 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Tinker Board: $56.85 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. Jetson TX2: $549.99 reported cost.10. Jetson TX1: $476.99 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: SETTinker BoardFirefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+AML-S905X-CC Le PotatoALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox80016002400320040003847.793792.463779.213765.763091.042052.271589.44948.18785.97699.25133.381. Tinker Board: $56.85 reported cost.2. Firefly ROC-RK3328-CC: $50.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. Jetson TX2: $549.99 reported cost.10. Jetson TX1: $476.99 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteJetson TX2Jetson TX1RockPro64Tinker BoardODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 B+Socionext DeveloperboxAML-S905X-CC Le PotatoPine64 1GBRaspberry Pi 3 BODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+ALL-H3-CC H5Raspberry Pi 2 BBanana Pi M330K60K90K120K150KSE +/- 871.71, N = 3SE +/- 1075.34, N = 3SE +/- 9690.22, N = 6SE +/- 222.05, N = 3SE +/- 287.89, N = 3SE +/- 238.66, N = 3SE +/- 65.58, N = 3SE +/- 16.44, N = 3SE +/- 52.26, N = 3SE +/- 17.90, N = 3SE +/- 58.48, N = 3SE +/- 82.63, N = 3SE +/- 27.36, N = 3SE +/- 26.01, N = 3SE +/- 7.80, N = 3SE +/- 141.51, N = 3SE +/- 84.14, N = 3133175111979713046639859176538024016538922378553698834420340522664226622213242083618202

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteTinker BoardFirefly ROC-RK3328-CCALL-H3-CC H2+Raspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ALL-H3-CC H3AML-S905X-CC Le PotatoODROID-C1+ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox300600900120015001167.951076.041064.881009.68983.71940.05888.07841.22694.94533.10242.14234.7632.441. Tinker Board: $56.85 reported cost.2. Firefly ROC-RK3328-CC: $50.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. Raspberry Pi 3 B+: $39.78 reported cost.5. Raspberry Pi 3 B: $34.99 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyTinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C1+ODROID-C2Firefly ROC-RK3328-CCJetson TX1Socionext DeveloperboxJetson TX250100150200250234.11189.77164.05122.27106.1096.2559.5433.7126.2626.231. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. AML-S905X-CC Le Potato: $45.00 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Jetson TX1: $476.99 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Jetson TX2: $549.99 reported cost.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlySocionext DeveloperboxJetson TX1Jetson TX2Tinker BoardRockPro64Raspberry Pi 3 BRaspberry Pi 3 B+ODROID-C2AML-S905X-CC Le PotatoODROID-C1+Pine64 1GBRaspberry Pi 2 BFirefly ROC-RK3328-CC7K14K21K28K35KSE +/- 64.76, N = 3SE +/- 112.24, N = 3SE +/- 29.83, N = 3SE +/- 143.40, N = 3SE +/- 203.37, N = 3SE +/- 61.95, N = 3SE +/- 115.45, N = 3SE +/- 103.97, N = 4SE +/- 32.74, N = 3SE +/- 17.10, N = 3SE +/- 9.36, N = 3SE +/- 57.37, N = 3SE +/- 8.74, N = 331506.0016079.0014427.0013309.0011587.656640.006526.006059.005502.005199.004555.003856.002977.001. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteSocionext DeveloperboxJetson TX2Jetson TX1Tinker BoardODROID-C2AML-S905X-CC Le PotatoPine64 1GBRaspberry Pi 3 BODROID-C1+Firefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 2 BRockPro649001800270036004500SE +/- 1.88, N = 3SE +/- 17.07, N = 3SE +/- 11.36, N = 3SE +/- 34.75, N = 12SE +/- 26.05, N = 12SE +/- 2.18, N = 3SE +/- 3.93, N = 3SE +/- 6.52, N = 12SE +/- 9.10, N = 12SE +/- 8.44, N = 12SE +/- 1.99, N = 6SE +/- 1.32, N = 3SE +/- 12.70, N = 64166.001793.001222.001142.00719.00603.00456.00409.00345.00263.00144.00133.00114.921. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteTinker BoardAML-S905X-CC Le PotatoRaspberry Pi 3 BODROID-C2ODROID-C1+Firefly ROC-RK3328-CCRaspberry Pi 3 B+Socionext DeveloperboxJetson TX2Jetson TX151015202520.0913.4011.6911.427.045.263.623.473.262.561. Tinker Board: $56.85 reported cost.2. AML-S905X-CC Le Potato: $45.00 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ODROID-C2: $62.95 reported cost.5. ODROID-C1+: $49.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. Raspberry Pi 3 B+: $39.78 reported cost.8. Socionext Developerbox: $1200.00 reported cost.9. Jetson TX2: $549.99 reported cost.10. Jetson TX1: $476.99 reported cost.

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesRockPro64Jetson TX2Jetson TX1Tinker BoardODROID-C2Firefly ROC-RK3328-CCBanana Pi M3Socionext DeveloperboxPine64 1GBRaspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C1+Raspberry Pi 3 BALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 BALL-H3-CC H59K18K27K36K45KSE +/- 44.05, N = 3SE +/- 16.86, N = 3SE +/- 21.11, N = 3SE +/- 16.41, N = 3SE +/- 167.68, N = 3SE +/- 46.73, N = 3SE +/- 60.92, N = 3SE +/- 13.74, N = 3SE +/- 32.08, N = 3SE +/- 85.92, N = 3SE +/- 50.54, N = 3SE +/- 37.03, N = 3SE +/- 25.83, N = 3SE +/- 35.56, N = 3SE +/- 50.90, N = 3SE +/- 51.49, N = 3SE +/- 54.78, N = 3521153576348925612775140301599019386201962092322876237732434929389294093790740680

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesTinker BoardFirefly ROC-RK3328-CCALL-H3-CC H2+ODROID-C2Raspberry Pi 3 B+Raspberry Pi 3 BALL-H3-CC H3AML-S905X-CC Le PotatoODROID-C1+ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox5M10M15M20M25M526203.60701500.00735225.00804186.25832316.94851971.51881670.001029420.001164877.001627200.002946296.433027932.5223263200.001. Tinker Board: $56.85 reported cost.2. Firefly ROC-RK3328-CC: $50.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ODROID-C2: $62.95 reported cost.5. Raspberry Pi 3 B+: $39.78 reported cost.6. Raspberry Pi 3 B: $34.99 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelSocionext DeveloperboxJetson TX2Jetson TX1Tinker BoardRockPro64ODROID-C2Banana Pi M3AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCRaspberry Pi 3 B+Pine64 1GBRaspberry Pi 3 BODROID-C1+ALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 B9001800270036004500SE +/- 1.67, N = 3SE +/- 60.69, N = 9SE +/- 60.87, N = 9SE +/- 5.86, N = 3SE +/- 18.57, N = 3SE +/- 0.45, N = 3SE +/- 22.18, N = 3SE +/- 2.44, N = 3SE +/- 10.58, N = 3SE +/- 2.67, N = 3SE +/- 3.98, N = 3SE +/- 16.16, N = 3SE +/- 5.34, N = 3SE +/- 5.10, N = 3SE +/- 1.59, N = 3SE +/- 6.17, N = 3SE +/- 6.73, N = 3391.00675.00851.001048.001250.151537.001669.001755.001773.002074.002342.002357.002720.003088.004156.004166.004375.001. (CC) gcc options: -lm -lpthread -O3

Primesieve

Primesieve generates prime numbers using a highly optimized sieve of Eratosthenes implementation. Primesieve benchmarks the CPU's L1/L2 cache performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationSocionext DeveloperboxJetson TX1ODROID-C2Banana Pi M3AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C1+ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H3ALL-H3-CC H2+400800120016002000SE +/- 0.13, N = 3SE +/- 15.34, N = 9SE +/- 3.10, N = 3SE +/- 13.52, N = 5SE +/- 4.98, N = 3SE +/- 15.71, N = 3SE +/- 14.59, N = 5SE +/- 11.17, N = 3SE +/- 21.17, N = 5SE +/- 31.20, N = 3SE +/- 19.70, N = 9SE +/- 5.62, N = 3SE +/- 15.03, N = 3SE +/- 21.10, N = 313340159987689193494311131543159116231897194019751. (CXX) g++ options: -O3 -lpthread

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeJetson TX2Jetson TX1Tinker BoardRockPro64ODROID-C2AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 3 BPine64 1GBSocionext DeveloperboxODROID-C1+Banana Pi M3ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3150300450600750SE +/- 0.07, N = 3SE +/- 0.11, N = 3SE +/- 0.05, N = 3SE +/- 12.69, N = 6SE +/- 0.05, N = 3SE +/- 0.12, N = 3SE +/- 0.18, N = 3SE +/- 3.87, N = 6SE +/- 0.44, N = 3SE +/- 0.24, N = 3SE +/- 0.28, N = 3SE +/- 2.17, N = 3SE +/- 5.31, N = 3SE +/- 1.23, N = 3SE +/- 0.55, N = 3SE +/- 0.03, N = 3SE +/- 0.21, N = 3134.00165.00192.00235.07260.00282.00289.00290.00333.00352.00400.00457.00461.00491.00667.00698.00700.001. (CC) gcc options: -lm -O3

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Jetson TX1Jetson TX2Tinker BoardRockPro64AML-S905X-CC Le PotatoODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 B+Socionext DeveloperboxRaspberry Pi 3 BODROID-C1+Pine64 1GBBanana Pi M3ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H3ALL-H3-CC H2+30060090012001500SE +/- 1.94, N = 3SE +/- 0.02, N = 3SE +/- 0.74, N = 3SE +/- 13.18, N = 4SE +/- 1.29, N = 3SE +/- 1.06, N = 3SE +/- 2.33, N = 3SE +/- 0.57, N = 3SE +/- 2.72, N = 3SE +/- 0.31, N = 3SE +/- 6.01, N = 3SE +/- 0.98, N = 3SE +/- 3.00, N = 3SE +/- 1.72, N = 3SE +/- 6.35, N = 3SE +/- 0.40, N = 3SE +/- 1.50, N = 3441.00455.00573.00807.52808.00822.00848.00867.00931.00934.00978.001034.001069.001219.001315.001383.001407.00-llzma-llzma-llzma -llz4-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma1. (CC) gcc options: -O3 -pthread -lz

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACJetson TX2Jetson TX1Tinker BoardRockPro64ODROID-C2Banana Pi M3Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoRaspberry Pi 3 B+ODROID-C1+Pine64 1GBRaspberry Pi 3 BSocionext DeveloperboxRaspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5120240360480600SE +/- 0.17, N = 5SE +/- 0.39, N = 5SE +/- 1.28, N = 5SE +/- 8.06, N = 10SE +/- 1.35, N = 5SE +/- 1.17, N = 5SE +/- 1.63, N = 5SE +/- 0.86, N = 5SE +/- 0.93, N = 5SE +/- 1.72, N = 5SE +/- 0.17, N = 5SE +/- 0.55, N = 5SE +/- 0.03, N = 5SE +/- 2.05, N = 5SE +/- 0.65, N = 5SE +/- 0.68, N = 5SE +/- 0.29, N = 565.1578.86122.05240.79263.28279.92293.37334.63336.07344.23352.20387.09390.76534.59537.27537.42566.38-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3Jetson TX2Jetson TX1Tinker BoardBanana Pi M3ODROID-C2RockPro64Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoRaspberry Pi 3 B+ODROID-C1+Pine64 1GBRaspberry Pi 3 BSocionext DeveloperboxRaspberry Pi 2 BALL-H3-CC H5ALL-H3-CC H2+ALL-H3-CC H3120240360480600SE +/- 0.11, N = 3SE +/- 0.15, N = 3SE +/- 0.06, N = 3SE +/- 2.53, N = 3SE +/- 2.55, N = 3SE +/- 5.13, N = 3SE +/- 0.24, N = 3SE +/- 0.09, N = 3SE +/- 0.49, N = 3SE +/- 0.99, N = 3SE +/- 0.11, N = 3SE +/- 0.10, N = 3SE +/- 0.07, N = 3SE +/- 0.40, N = 3SE +/- 0.09, N = 3SE +/- 0.29, N = 3SE +/- 0.28, N = 395.91113.14145.59266.35266.80276.18296.20300.96301.98331.01350.19352.66406.39514.11518.51535.90536.62-lncurses-lncurses1. (CC) gcc options: -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlJetson TX2Jetson TX1Tinker BoardRockPro64Raspberry Pi 3 B+ODROID-C2Raspberry Pi 3 BFirefly ROC-RK3328-CCPine64 1GBAML-S905X-CC Le PotatoSocionext DeveloperboxODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 BALL-H3-CC H5Banana Pi M30.58421.16841.75262.33682.921SE +/- 0.00383151, N = 3SE +/- 0.00322779, N = 3SE +/- 0.00065111, N = 3SE +/- 0.24776293, N = 6SE +/- 0.01837187, N = 4SE +/- 0.02171209, N = 3SE +/- 0.00473476, N = 3SE +/- 0.01051258, N = 3SE +/- 0.00496104, N = 3SE +/- 0.00368669, N = 3SE +/- 0.00683757, N = 3SE +/- 0.06022970, N = 6SE +/- 0.00913039, N = 3SE +/- 0.00906752, N = 3SE +/- 0.04245993, N = 9SE +/- 0.01160841, N = 3SE +/- 0.02860806, N = 30.487469040.600710340.694156800.924795941.118339731.118933611.294479021.313661231.404496211.493777501.570880611.731624182.266156292.273662232.465045752.575798692.59638113

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterJetson TX1Tinker BoardFirefly ROC-RK3328-CCODROID-C2Socionext DeveloperboxRaspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C1+Raspberry Pi 3 BRockPro64Jetson TX2ALL-H3-CC H3ALL-H3-CC H2+Pine64 1GBALL-H3-CC H5Raspberry Pi 2 BBanana Pi M30.00780.01560.02340.03120.039SE +/- 0.00001414, N = 3SE +/- 0.00014579, N = 12SE +/- 0.00002586, N = 3SE +/- 0.00001616, N = 3SE +/- 0.00001488, N = 3SE +/- 0.00021301, N = 12SE +/- 0.00008543, N = 3SE +/- 0.00000666, N = 3SE +/- 0.00021052, N = 11SE +/- 0.00007220, N = 3SE +/- 0.00012375, N = 3SE +/- 0.00003080, N = 3SE +/- 0.00001117, N = 3SE +/- 0.00011141, N = 3SE +/- 0.00001343, N = 3SE +/- 0.00021832, N = 3SE +/- 0.00011530, N = 30.002358690.004280810.005147610.005511930.006588400.007429010.007760800.008142310.008420840.008494750.009870310.010109650.010121650.010257860.010577180.013451550.03473245

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsJetson TX2Jetson TX1Tinker BoardODROID-C2Firefly ROC-RK3328-CCSocionext DeveloperboxRaspberry Pi 3 B+Pine64 1GBAML-S905X-CC Le PotatoRaspberry Pi 3 BODROID-C1+ALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 BRockPro64306090120150SE +/- 0.20, N = 3SE +/- 0.67, N = 12SE +/- 0.68, N = 12SE +/- 1.18, N = 12SE +/- 0.91, N = 12SE +/- 0.01, N = 3SE +/- 1.49, N = 12SE +/- 0.83, N = 3SE +/- 0.94, N = 12SE +/- 1.07, N = 3SE +/- 0.83, N = 12SE +/- 1.24, N = 12SE +/- 1.30, N = 12SE +/- 0.78, N = 3SE +/- 1.28, N = 12SE +/- 25.10, N = 617.5723.6626.0638.9940.0446.3751.8452.6454.4157.1969.2377.1987.3791.8397.32152.551. Jetson TX2: git version 2.7.42. Jetson TX1: git version 2.7.43. Tinker Board: git version 2.11.04. ODROID-C2: git version 2.17.15. Firefly ROC-RK3328-CC: git version 2.17.16. Socionext Developerbox: git version 2.17.17. Raspberry Pi 3 B+: git version 2.11.08. Pine64 1GB: git version 2.7.49. AML-S905X-CC Le Potato: git version 2.11.010. Raspberry Pi 3 B: git version 2.11.011. ODROID-C1+: git version 2.7.412. ALL-H3-CC H5: git version 2.11.013. ALL-H3-CC H3: git version 2.17.114. ALL-H3-CC H2+: git version 2.17.115. Raspberry Pi 2 B: git version 2.11.016. RockPro64: git version 2.19.0

Scikit-Learn

Scikit-learn is a Python module for machine learning Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.17.1Banana Pi M3Jetson TX1Tinker BoardFirefly ROC-RK3328-CCODROID-C2Raspberry Pi 3 B+Raspberry Pi 3 BPine64 1GBSocionext DeveloperboxAML-S905X-CC Le PotatoALL-H3-CC H5ODROID-C1+ALL-H3-CC H3Raspberry Pi 2 B5001000150020002500SE +/- 0.29, N = 3SE +/- 1.69, N = 3SE +/- 1.43, N = 3SE +/- 1.06, N = 3SE +/- 1.01, N = 3SE +/- 1.26, N = 3SE +/- 0.80, N = 3SE +/- 0.51, N = 3SE +/- 0.74, N = 3SE +/- 1.54, N = 3SE +/- 1.25, N = 3SE +/- 2.27, N = 3SE +/- 1.01, N = 3SE +/- 7.83, N = 32214344746506647858448538999541515163122462328

C-Ray

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterC-Ray 1.1Performance / Cost - Total Time - 4K, 16 Rays Per PixelTinker BoardAML-S905X-CC Le PotatoRaspberry Pi 3 BRaspberry Pi 3 B+Firefly ROC-RK3328-CCODROID-C2ALL-H3-CC H2+ALL-H3-CC H5ALL-H3-CC H3ODROID-C1+Jetson TX2Jetson TX1Socionext Developerbox100K200K300K400K500K59578.8078975.0082471.4382503.7288650.0096754.15104150.00123520.00124680.00133280.00371243.25405918.49469200.001. Tinker Board: $56.85 reported cost.2. AML-S905X-CC Le Potato: $45.00 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. Raspberry Pi 3 B+: $39.78 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H2+: $25.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ALL-H3-CC H3: $30.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Primesieve

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPrimesieve 7.1Performance / Cost - 1e12 Prime Number GenerationODROID-C2AML-S905X-CC Le PotatoRaspberry Pi 3 B+Firefly ROC-RK3328-CCALL-H3-CC H2+Raspberry Pi 3 BALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Socionext DeveloperboxJetson TX140K80K120K160K200K37707.0540095.0044275.1446700.0049375.0053989.5758200.0064920.0077959.00159600.00191272.991. ODROID-C2: $62.95 reported cost.2. AML-S905X-CC Le Potato: $45.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. ALL-H3-CC H2+: $25.00 reported cost.6. Raspberry Pi 3 B: $34.99 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Socionext Developerbox: $1200.00 reported cost.11. Jetson TX1: $476.99 reported cost.

AOBench

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterAOBenchPerformance / Cost - Size: 2048 x 2048 - Total TimeTinker BoardRaspberry Pi 3 B+Raspberry Pi 3 BAML-S905X-CC Le PotatoFirefly ROC-RK3328-CCODROID-C2ALL-H3-CC H2+ALL-H3-CC H5ALL-H3-CC H3ODROID-C1+Jetson TX2Jetson TX1Socionext Developerbox100K200K300K400K500K10915.2011536.2011651.6712690.0014450.0016367.0017450.0019640.0021000.0022393.0073698.6678703.35480000.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. AML-S905X-CC Le Potato: $45.00 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H2+: $25.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ALL-H3-CC H3: $30.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Tinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+ALL-H3-CC H2+AML-S905X-CC Le PotatoALL-H3-CC H3Firefly ROC-RK3328-CCODROID-C1+ALL-H3-CC H5ODROID-C2Jetson TX1Jetson TX2Socionext Developerbox200K400K600K800K1000K32575.0532680.6634489.2635175.0036360.0041490.0042400.0047922.0048760.0051744.90210352.59250245.451117200.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. ALL-H3-CC H3: $30.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. ODROID-C1+: $49.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ODROID-C2: $62.95 reported cost.11. Jetson TX1: $476.99 reported cost.12. Jetson TX2: $549.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACTinker BoardRaspberry Pi 3 B+ALL-H3-CC H2+Raspberry Pi 3 BFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H3ODROID-C2ODROID-C1+ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox100K200K300K400K500K6938.5413368.8613431.7513544.2814668.5015058.3516122.6016573.4816867.2722655.2035831.8537615.43468912.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3Tinker BoardRaspberry Pi 3 B+Raspberry Pi 3 BALL-H3-CC H2+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCALL-H3-CC H3ODROID-C1+ODROID-C2ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox100K200K300K400K500K8276.7912012.7612339.5713397.5013543.2014810.0016098.6016219.4916795.0620740.4052749.5453966.65487668.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C1+: $49.00 reported cost.9. ODROID-C2: $62.95 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlTinker BoardRaspberry Pi 3 B+Raspberry Pi 3 BALL-H3-CC H2+Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H3ODROID-C2ODROID-C1+ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox40080012001600200039.4644.4945.2956.8465.6867.2267.9870.4484.85103.03268.10286.531885.061. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterTinker BoardALL-H3-CC H2+Firefly ROC-RK3328-CCRaspberry Pi 3 BALL-H3-CC H3Raspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C2ODROID-C1+ALL-H3-CC H5Jetson TX1Jetson TX2Socionext Developerbox2468100.240.250.260.290.300.300.350.350.400.421.135.437.911. Tinker Board: $56.85 reported cost.2. ALL-H3-CC H2+: $25.00 reported cost.3. Firefly ROC-RK3328-CC: $50.00 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ALL-H3-CC H3: $30.00 reported cost.6. Raspberry Pi 3 B+: $39.78 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX1: $476.99 reported cost.12. Jetson TX2: $549.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Git

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGitPerformance / Cost - Time To Complete Common Git CommandsTinker BoardRaspberry Pi 3 BFirefly ROC-RK3328-CCRaspberry Pi 3 B+ALL-H3-CC H2+AML-S905X-CC Le PotatoODROID-C2ALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Jetson TX2Jetson TX1Socionext Developerbox12K24K36K48K60K1481.512001.082002.002062.202295.752448.452454.422621.103087.603392.279663.3211285.5855644.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Firefly ROC-RK3328-CC: $50.00 reported cost.4. Raspberry Pi 3 B+: $39.78 reported cost.5. ALL-H3-CC H2+: $25.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. ALL-H3-CC H3: $30.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Scikit-Learn

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterScikit-Learn 0.17.1Performance / Cost -Tinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+Firefly ROC-RK3328-CCODROID-C2AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ODROID-C1+Jetson TX1Socionext Developerbox200K400K600K800K1000K26946.9029531.5631227.3032500.0041798.8042930.0060600.0067380.0079919.00207013.661078800.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H5: $40.00 reported cost.8. ALL-H3-CC H3: $30.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Jetson TX1: $476.99 reported cost.11. Socionext Developerbox: $1200.00 reported cost.