Various ARM Linux Benchmarks - Spetember 2018

Various ARM board benchmarks... Tests for a future article on Phoronix.com by Michael Larabel.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1809186-RA-1809111RA60
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Audio Encoding 2 Tests
C/C++ Compiler Tests 8 Tests
Compression Tests 2 Tests
CPU Massive 14 Tests
Creator Workloads 6 Tests
Database Test Suite 2 Tests
Encoding 3 Tests
Common Kernel Benchmarks 2 Tests
Multi-Core 8 Tests
Programmer / Developer System Benchmarks 3 Tests
Python 2 Tests
Renderers 3 Tests
Server 4 Tests
Server CPU Tests 8 Tests
Single-Threaded 8 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
ALL-H3-CC H2+
September 04 2018
  11 Hours, 9 Minutes
ALL-H3-CC H3
September 04 2018
  13 Hours, 14 Minutes
ALL-H3-CC H5
September 04 2018
  13 Hours, 49 Minutes
AML-S905X-CC Le Potato
September 03 2018
  6 Hours, 58 Minutes
Banana Pi M3
September 06 2018
  6 Hours, 50 Minutes
Firefly ROC-RK3328-CC
September 03 2018
  6 Hours, 22 Minutes
Jetson TX1
September 10 2018
  5 Hours, 24 Minutes
Jetson TX2
August 28 2018
  3 Hours, 12 Minutes
ODROID-C1+
September 06 2018
  10 Hours, 14 Minutes
ODROID-C2
August 31 2018
  6 Hours
Pine64 1GB
August 31 2018
  8 Hours, 8 Minutes
Raspberry Pi 2 B
August 27 2018
  14 Hours, 22 Minutes
Raspberry Pi 3 B
August 31 2018
  9 Hours, 37 Minutes
Raspberry Pi 3 B+
August 27 2018
  7 Hours, 52 Minutes
Socionext Developerbox
August 24 2018
  5 Hours, 6 Minutes
Tinker Board
August 31 2018
  4 Hours, 10 Minutes
RockPro64
September 17 2018
  6 Hours, 33 Minutes
Invert Hiding All Results Option
  8 Hours, 11 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

ALL-H3-CC H3

Changed Memory to 1024MB.

Changed Disk to 32GB GB1QT.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

RockPro64

Processor: SiFive RISC-V @ 1.42GHz (6 Cores), Motherboard: Pine64 RockPro64, Memory: 4096MB, Disk: 2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32G, Monitor: LG TV

OS: Arch Linux ARM, Kernel: 4.18.0-rc8-1 (aarch64), Display Server: X Server 1.20.1, Compiler: GCC 8.2.0, File-System: ext4

Compiler Notes: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnu
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 3.7.0

Various ARM Linux Benchmarks - Spetember 2018ProcessorMotherboardMemoryDiskMonitorGraphicsAudioOSKernelCompilerFile-SystemScreen ResolutionDisplay ServerDesktopDisplay DriverVulkanALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro64ARMv7 rev 5 @ 0.91GHz (4 Cores)Allwinner sun8i Family Libre Board ALL-H3-CC H3493MB32GB SC32GVE228Ubuntu 18.044.14.65-sunxi (armv7l)GCC 7.3.0ext41920x10801024MB32GB GB1QTARMVv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H52048MBRaspbian 9.44.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2GCC 6.3.0 20170516Unknown @ 1.51GHz (4 Cores)Libre Board AML-S905X-CC32GB SC32GAcer P243W4.14.53-00653-gc01abe8ba6bc (aarch64)LXDE1920x1200ARMv7 rev 5 @ 1.80GHz (8 Cores)sun8i32GB SC32G + 8GB M8G1GCPowerVRRaspbian 8.03.4.39-BPI-M3-Kernel (armv7l)X Server 1.18.4GCC 4.9.21280x720Rockchip @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CC32GB GB1QTAcer P243WUbuntu 18.044.4.114 (aarch64)GCC 7.3.01920x1080p60ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA TEGRAUbuntu 16.044.4.38-tegra (aarch64)Unity 7.4.5NVIDIA 1.0.01.0.8GCC 5.4.0 201606091920x1200ARMv8 rev 3 @ 2.04GHz (6 Cores)quill8192MB31GB 032G34DELL P2415Q3840x2160ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC804MB32GB GB1QTARM Mali3.10.107-190 (armv7l)1920x2160Amlogic @ 1.54GHz (4 Cores)ODROID-C22048MBOSDUbuntu 18.043.16.57-20 (aarch64)X Server 1.19.6GCC 7.3.01920x1200AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SC32GUbuntu 16.043.10.104 (aarch64)X Server 1.18.4GCC 5.4.0 201606091920x1080ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1927MB32GB GB2MWBCM2708Raspbian 9.44.14.50-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 201705161920x1200ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.232GB GB1QT4.14.62-v7+ (armv7l)656x416ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.332GB GB2MW1920x1200Unknown (24 Cores)Socionext SynQuacer E- DeveloperBox (build #38 BIOS)32768MB8GB M32508 + 1000GB Samsung SSD 970 EVO 1TBASUS NVIDIA GeForce GT 710B 1024MBNVIDIA GK208 HDMI/DPASUS VG236Ubuntu 18.044.15.0-33-generic (aarch64)GCC 7.3.01920x1080ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTAcer P243WDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 20170516SiFive RISC-V @ 1.42GHz (6 Cores)Pine64 RockPro644096MB2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32GLG TVArch Linux ARM4.18.0-rc8-1 (aarch64)X Server 1.20.1GCC 8.2.0OpenBenchmarking.orgCompiler Details- ALL-H3-CC H2+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H3: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- AML-S905X-CC Le Potato: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Banana Pi M3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- ODROID-C1+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Pine64 1GB: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Raspberry Pi 2 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Socionext Developerbox: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v- RockPro64: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnuProcessor Details- ALL-H3-CC H2+: Scaling Governor: cpufreq-dt ondemand- ALL-H3-CC H3: Scaling Governor: cpufreq-dt ondemand- AML-S905X-CC Le Potato: Scaling Governor: arm-big-little ondemand- Banana Pi M3: Scaling Governor: sunxi-iks ondemand- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- Jetson TX1: Scaling Governor: tegra-cpufreq interactive- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- ODROID-C1+: Scaling Governor: meson_cpufreq performance- ODROID-C2: Scaling Governor: meson_cpufreq performance- Pine64 1GB: Scaling Governor: cpufreq-sunxi interactive- Raspberry Pi 2 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B+: Scaling Governor: BCM2835 Freq ondemand- Tinker Board: Scaling Governor: cpufreq-dt interactive- RockPro64: Scaling Governor: cpufreq-dt ondemandPython Details- ALL-H3-CC H2+: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H3: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- AML-S905X-CC Le Potato: Python 2.7.13 + Python 3.5.3- Banana Pi M3: Python 2.7.9 + Python 3.4.2- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5- Jetson TX1: Python 2.7.12 + Python 3.5.2- Jetson TX2: Python 2.7.12 + Python 3.5.2- ODROID-C1+: Python 2.7.12 + Python 3.5.2- ODROID-C2: Python 2.7.15rc1 + Python 3.6.5- Pine64 1GB: Python 2.7.12 + Python 3.5.2- Raspberry Pi 2 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B+: Python 2.7.13 + Python 3.5.3- Socionext Developerbox: Python 2.7.15rc1 + Python 3.6.5- Tinker Board: Python 2.7.13 + Python 3.5.3- RockPro64: Python 3.7.0Disk Mount Options Details- Jetson TX2: data=ordered,relatime,rw- ODROID-C2: errors=remount-ro,noatime,rw- Pine64 1GB: data=ordered,noatime,rw,stripe=1024- Raspberry Pi 2 B: data=ordered,noatime,rw- Raspberry Pi 3 B: data=ordered,noatime,rw- Raspberry Pi 3 B+: data=ordered,noatime,rw- Tinker Board: data=ordered,noatime,rwDisk Details- Socionext Developerbox: NONE / data=ordered,errors=remount-ro,relatime,rw

ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro64Result OverviewPhoronix Test Suite100%353%607%860%1113%PyBenchFLAC Audio EncodingPerl BenchmarksPHPBenchLAME MP3 EncodingTinymembenchAOBenchZstd CompressionHierarchical INTegrationC-Ray

Various ARM Linux Benchmarks - Spetember 2018tinymembench: Standard Memcpyttsiod-renderer: Phong Rendering With Soft-Shadow Mappingx264: H.264 Video Encodingcompress-7zip: Compress Speed Testc-ray: Total Time - 4K, 16 Rays Per Pixelprimesieve: 1e12 Prime Number Generationaobench: 2048 x 2048 - Total Timecompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19encode-flac: WAV To FLACencode-mp3: WAV To MP3perl-benchmark: Pod2htmlperl-benchmark: Interpreterpgbench: Buffer Test - Normal Load - Read Onlypgbench: Buffer Test - Normal Load - Read Writeredis: GETredis: SETpybench: Total For Average Test Timeshint: FLOATphpbench: PHP Benchmark Suitegit: Time To Complete Common Git Commandsscikit-learn: ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro6482710.731.131162416619756981407537.27535.902.273662230.0101216529409346378802662291.8391210.831.141197415619407001383537.42536.622.266156290.0101096529389346403332664287.372246133911.911301308816234911219566.38518.512.575798690.01057718547793792740680340037202132477.191515209520.3022091755891282808334.63300.961.493777500.0077608055026031029537152522876591213883785554.41954738265416698764611069279.92266.352.596381130.034732451242157988115990679353711820222115662.1219511773934289848293.37296.201.313661230.00514761297726326560818962314030611296125380240.04650386245.055.96452685140116544178.86113.140.600710340.0023586916079122248468833353563488838131311197923.664343798565067513445565.1595.910.487469040.00987031144271793660813432278535710398808713317517.5792814.151.46147727201591457978344.23331.011.731624180.00814231519934516734610056123773557298813405269.231631168823.072.8921981537599260822263.28266.801.118933610.00551193605971927154719458112775676732615917638.99664137715.732.1223429433521034352.20350.191.404496210.01025786455545625554615981020196501852043698852.6485395610.941.101125437518976671315534.59514.112.465045750.0134515538561331131116721037907359526602083697.322328129715.662.03186323571543333934387.09352.661.294479020.00842084664040921306713176424349500091353442057.19844128816.822.09179620741113290867336.07301.981.118339730.00742901652614424076115033720923579571934016551.84785154389.2812.419368391133400931390.76406.391.570880610.0065884031506416623572116005319386441503763892246.37899150227.804.4234721048192573122.05145.590.694156800.004280811330911423263512187479256807553256639826.064741836.8029231250.15235.07807.52240.79276.180.924795940.0084947511587.65114.92319017.45219557.43521194934888.5971304152.55OpenBenchmarking.org

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyBanana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ODROID-C1+Raspberry Pi 2 BRaspberry Pi 3 B+Raspberry Pi 3 BALL-H3-CC H5Pine64 1GBTinker BoardSocionext DeveloperboxFirefly ROC-RK3328-CCODROID-C2RockPro64AML-S905X-CC Le PotatoJetson TX2Jetson TX18001600240032004000738.00827.00912.00928.00956.001288.001297.001339.001377.001502.001543.001566.001688.001836.802095.003798.003862.001. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetBanana Pi M3Raspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+ALL-H3-CC H5ALL-H3-CC H2+ALL-H3-CC H3ODROID-C1+Pine64 1GBODROID-C2Tinker BoardAML-S905X-CC Le PotatoFirefly ROC-RK3328-CCSocionext DeveloperboxRockPro64Jetson TX1Jetson TX23K6K9K12K15K1064.001177.001738.001871.002193.002277.002278.002881.003093.003604.004192.005535.007336.007359.008265.8010374.0013913.001. (CC) gcc options: -O2 -lm

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingALL-H3-CC H2+ALL-H3-CC H3Raspberry Pi 2 BALL-H3-CC H5ODROID-C1+Raspberry Pi 3 BPine64 1GBRaspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C2Tinker BoardJetson TX1Socionext Developerbox20406080100SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.25, N = 4SE +/- 0.05, N = 3SE +/- 0.03, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.07, N = 3SE +/- 0.07, N = 310.7310.8310.9411.9114.1515.6615.7316.8220.3023.0727.8045.0589.281. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-07-28H.264 Video EncodingRaspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3ODROID-C1+Raspberry Pi 3 BRaspberry Pi 3 B+Firefly ROC-RK3328-CCPine64 1GBODROID-C2Tinker BoardJetson TX1Socionext Developerbox3691215SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.05, N = 3SE +/- 0.06, N = 3SE +/- 0.01, N = 31.101.131.141.462.032.092.122.122.894.425.9612.411. (CC) gcc options: -ldl -lm -lpthread

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestRaspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Raspberry Pi 3 B+Raspberry Pi 3 BFirefly ROC-RK3328-CCODROID-C2AML-S905X-CC Le PotatoBanana Pi M3RockPro64Tinker BoardJetson TX1Jetson TX2Socionext Developerbox2K4K6K8K10KSE +/- 8.84, N = 3SE +/- 1.45, N = 3SE +/- 1.20, N = 3SE +/- 13.74, N = 3SE +/- 16.51, N = 3SE +/- 3.84, N = 3SE +/- 0.67, N = 3SE +/- 17.25, N = 3SE +/- 4.16, N = 3SE +/- 43.13, N = 9SE +/- 85.04, N = 6SE +/- 36.57, N = 3SE +/- 28.68, N = 3SE +/- 11.46, N = 3SE +/- 58.09, N = 311251162119713011477179618631951219822092654292334724526565093681. (CXX) g++ options: -pipe -lpthread

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelRaspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Raspberry Pi 3 BPine64 1GBRaspberry Pi 3 B+Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoBanana Pi M3ODROID-C2RockPro64Tinker BoardJetson TX1Jetson TX2Socionext Developerbox9001800270036004500SE +/- 6.73, N = 3SE +/- 6.17, N = 3SE +/- 1.59, N = 3SE +/- 5.10, N = 3SE +/- 5.34, N = 3SE +/- 16.16, N = 3SE +/- 3.98, N = 3SE +/- 2.67, N = 3SE +/- 10.58, N = 3SE +/- 2.44, N = 3SE +/- 22.18, N = 3SE +/- 0.45, N = 3SE +/- 18.57, N = 3SE +/- 5.86, N = 3SE +/- 60.87, N = 9SE +/- 60.69, N = 9SE +/- 1.67, N = 34375.004166.004156.003088.002720.002357.002342.002074.001773.001755.001669.001537.001250.151048.00851.00675.00391.001. (CC) gcc options: -lm -lpthread -O3

Primesieve

Primesieve generates prime numbers using a highly optimized sieve of Eratosthenes implementation. Primesieve benchmarks the CPU's L1/L2 cache performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationALL-H3-CC H2+ALL-H3-CC H3Raspberry Pi 2 BALL-H3-CC H5ODROID-C1+Raspberry Pi 3 BRaspberry Pi 3 B+Pine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoBanana Pi M3ODROID-C2Jetson TX1Socionext Developerbox400800120016002000SE +/- 21.10, N = 3SE +/- 15.03, N = 3SE +/- 5.62, N = 3SE +/- 19.70, N = 9SE +/- 31.20, N = 3SE +/- 21.17, N = 5SE +/- 11.17, N = 3SE +/- 14.59, N = 5SE +/- 15.71, N = 3SE +/- 4.98, N = 3SE +/- 13.52, N = 5SE +/- 3.10, N = 3SE +/- 15.34, N = 9SE +/- 0.13, N = 319751940189716231591154311139439348918765994011331. (CXX) g++ options: -O3 -lpthread

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 BALL-H3-CC H5Banana Pi M3ODROID-C1+Socionext DeveloperboxPine64 1GBRaspberry Pi 3 BRaspberry Pi 3 B+Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoODROID-C2RockPro64Tinker BoardJetson TX1Jetson TX2150300450600750SE +/- 0.21, N = 3SE +/- 0.03, N = 3SE +/- 0.55, N = 3SE +/- 1.23, N = 3SE +/- 5.31, N = 3SE +/- 2.17, N = 3SE +/- 0.28, N = 3SE +/- 0.24, N = 3SE +/- 0.44, N = 3SE +/- 3.87, N = 6SE +/- 0.18, N = 3SE +/- 0.12, N = 3SE +/- 0.05, N = 3SE +/- 12.69, N = 6SE +/- 0.05, N = 3SE +/- 0.11, N = 3SE +/- 0.07, N = 3700.00698.00667.00491.00461.00457.00400.00352.00333.00290.00289.00282.00260.00235.07192.00165.00134.001. (CC) gcc options: -lm -O3

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ALL-H3-CC H2+ALL-H3-CC H3Raspberry Pi 2 BALL-H3-CC H5Banana Pi M3Pine64 1GBODROID-C1+Raspberry Pi 3 BSocionext DeveloperboxRaspberry Pi 3 B+Firefly ROC-RK3328-CCODROID-C2AML-S905X-CC Le PotatoRockPro64Tinker BoardJetson TX2Jetson TX130060090012001500SE +/- 1.50, N = 3SE +/- 0.40, N = 3SE +/- 6.35, N = 3SE +/- 1.72, N = 3SE +/- 3.00, N = 3SE +/- 0.98, N = 3SE +/- 6.01, N = 3SE +/- 0.31, N = 3SE +/- 2.72, N = 3SE +/- 0.57, N = 3SE +/- 2.33, N = 3SE +/- 1.06, N = 3SE +/- 1.29, N = 3SE +/- 13.18, N = 4SE +/- 0.74, N = 3SE +/- 0.02, N = 3SE +/- 1.94, N = 31407.001383.001315.001219.001069.001034.00978.00934.00931.00867.00848.00822.00808.00807.52573.00455.00441.00-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma -llz4-llzma-llzma1. (CC) gcc options: -O3 -pthread -lz

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 BSocionext DeveloperboxRaspberry Pi 3 BPine64 1GBODROID-C1+Raspberry Pi 3 B+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCBanana Pi M3ODROID-C2RockPro64Tinker BoardJetson TX1Jetson TX2120240360480600SE +/- 0.29, N = 5SE +/- 0.68, N = 5SE +/- 0.65, N = 5SE +/- 2.05, N = 5SE +/- 0.03, N = 5SE +/- 0.55, N = 5SE +/- 0.17, N = 5SE +/- 1.72, N = 5SE +/- 0.93, N = 5SE +/- 0.86, N = 5SE +/- 1.63, N = 5SE +/- 1.17, N = 5SE +/- 1.35, N = 5SE +/- 8.06, N = 10SE +/- 1.28, N = 5SE +/- 0.39, N = 5SE +/- 0.17, N = 5566.38537.42537.27534.59390.76387.09352.20344.23336.07334.63293.37279.92263.28240.79122.0578.8665.15-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3ALL-H3-CC H3ALL-H3-CC H2+ALL-H3-CC H5Raspberry Pi 2 BSocionext DeveloperboxRaspberry Pi 3 BPine64 1GBODROID-C1+Raspberry Pi 3 B+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCRockPro64ODROID-C2Banana Pi M3Tinker BoardJetson TX1Jetson TX2120240360480600SE +/- 0.28, N = 3SE +/- 0.29, N = 3SE +/- 0.09, N = 3SE +/- 0.40, N = 3SE +/- 0.07, N = 3SE +/- 0.10, N = 3SE +/- 0.11, N = 3SE +/- 0.99, N = 3SE +/- 0.49, N = 3SE +/- 0.09, N = 3SE +/- 0.24, N = 3SE +/- 5.13, N = 3SE +/- 2.55, N = 3SE +/- 2.53, N = 3SE +/- 0.06, N = 3SE +/- 0.15, N = 3SE +/- 0.11, N = 3536.62535.90518.51514.11406.39352.66350.19331.01301.98300.96296.20276.18266.80266.35145.59113.1495.91-lncurses-lncurses1. (CC) gcc options: -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlBanana Pi M3ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3ODROID-C1+Socionext DeveloperboxAML-S905X-CC Le PotatoPine64 1GBFirefly ROC-RK3328-CCRaspberry Pi 3 BODROID-C2Raspberry Pi 3 B+RockPro64Tinker BoardJetson TX1Jetson TX20.58421.16841.75262.33682.921SE +/- 0.02860806, N = 3SE +/- 0.01160841, N = 3SE +/- 0.04245993, N = 9SE +/- 0.00906752, N = 3SE +/- 0.00913039, N = 3SE +/- 0.06022970, N = 6SE +/- 0.00683757, N = 3SE +/- 0.00368669, N = 3SE +/- 0.00496104, N = 3SE +/- 0.01051258, N = 3SE +/- 0.00473476, N = 3SE +/- 0.02171209, N = 3SE +/- 0.01837187, N = 4SE +/- 0.24776293, N = 6SE +/- 0.00065111, N = 3SE +/- 0.00322779, N = 3SE +/- 0.00383151, N = 32.596381132.575798692.465045752.273662232.266156291.731624181.570880611.493777501.404496211.313661231.294479021.118933611.118339730.924795940.694156800.600710340.48746904

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterBanana Pi M3Raspberry Pi 2 BALL-H3-CC H5Pine64 1GBALL-H3-CC H2+ALL-H3-CC H3Jetson TX2RockPro64Raspberry Pi 3 BODROID-C1+AML-S905X-CC Le PotatoRaspberry Pi 3 B+Socionext DeveloperboxODROID-C2Firefly ROC-RK3328-CCTinker BoardJetson TX10.00780.01560.02340.03120.039SE +/- 0.00011530, N = 3SE +/- 0.00021832, N = 3SE +/- 0.00001343, N = 3SE +/- 0.00011141, N = 3SE +/- 0.00001117, N = 3SE +/- 0.00003080, N = 3SE +/- 0.00012375, N = 3SE +/- 0.00007220, N = 3SE +/- 0.00021052, N = 11SE +/- 0.00000666, N = 3SE +/- 0.00008543, N = 3SE +/- 0.00021301, N = 12SE +/- 0.00001488, N = 3SE +/- 0.00001616, N = 3SE +/- 0.00002586, N = 3SE +/- 0.00014579, N = 12SE +/- 0.00001414, N = 30.034732450.013451550.010577180.010257860.010121650.010109650.009870310.008494750.008420840.008142310.007760800.007429010.006588400.005511930.005147610.004280810.00235869

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyFirefly ROC-RK3328-CCRaspberry Pi 2 BPine64 1GBODROID-C1+AML-S905X-CC Le PotatoODROID-C2Raspberry Pi 3 B+Raspberry Pi 3 BRockPro64Tinker BoardJetson TX2Jetson TX1Socionext Developerbox7K14K21K28K35KSE +/- 8.74, N = 3SE +/- 57.37, N = 3SE +/- 9.36, N = 3SE +/- 17.10, N = 3SE +/- 32.74, N = 3SE +/- 103.97, N = 4SE +/- 115.45, N = 3SE +/- 61.95, N = 3SE +/- 203.37, N = 3SE +/- 143.40, N = 3SE +/- 29.83, N = 3SE +/- 112.24, N = 3SE +/- 64.76, N = 32977.003856.004555.005199.005502.006059.006526.006640.0011587.6513309.0014427.0016079.0031506.001. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteRockPro64Raspberry Pi 2 BRaspberry Pi 3 B+Firefly ROC-RK3328-CCODROID-C1+Raspberry Pi 3 BPine64 1GBAML-S905X-CC Le PotatoODROID-C2Tinker BoardJetson TX1Jetson TX2Socionext Developerbox9001800270036004500SE +/- 12.70, N = 6SE +/- 1.32, N = 3SE +/- 1.99, N = 6SE +/- 8.44, N = 12SE +/- 9.10, N = 12SE +/- 6.52, N = 12SE +/- 3.93, N = 3SE +/- 2.18, N = 3SE +/- 26.05, N = 12SE +/- 34.75, N = 12SE +/- 11.36, N = 3SE +/- 17.07, N = 3SE +/- 1.88, N = 3114.92133.00144.00263.00345.00409.00456.00603.00719.001142.001222.001793.004166.001. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETALL-H3-CC H5AML-S905X-CC Le PotatoRaspberry Pi 2 BBanana Pi M3ODROID-C1+Raspberry Pi 3 BSocionext DeveloperboxRaspberry Pi 3 B+Pine64 1GBFirefly ROC-RK3328-CCODROID-C2RockPro64Tinker BoardJetson TX1Jetson TX2140K280K420K560K700KSE +/- 336.63, N = 3SE +/- 263.42, N = 3SE +/- 1911.33, N = 3SE +/- 1833.04, N = 3SE +/- 1992.94, N = 12SE +/- 1229.44, N = 3SE +/- 2599.96, N = 3SE +/- 1090.67, N = 3SE +/- 3541.46, N = 3SE +/- 3573.20, N = 6SE +/- 777.10, N = 3SE +/- 3406.66, N = 3SE +/- 4435.65, N = 3SE +/- 2915.59, N = 3SE +/- 2540.60, N = 354779.00102953.00113111.00124215.00167346.00213067.00235721.00240761.00255546.00265608.00271547.00319017.45326351.00484688.00660813.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETALL-H3-CC H5Raspberry Pi 2 BAML-S905X-CC Le PotatoBanana Pi M3ODROID-C1+Raspberry Pi 3 BRaspberry Pi 3 B+Pine64 1GBSocionext DeveloperboxFirefly ROC-RK3328-CCODROID-C2Tinker BoardRockPro64Jetson TX1Jetson TX290K180K270K360K450KSE +/- 313.11, N = 3SE +/- 744.95, N = 3SE +/- 405.28, N = 3SE +/- 1043.53, N = 3SE +/- 1526.07, N = 5SE +/- 881.60, N = 3SE +/- 677.69, N = 3SE +/- 1081.64, N = 3SE +/- 368.39, N = 3SE +/- 335.35, N = 3SE +/- 2273.51, N = 3SE +/- 2798.54, N = 3SE +/- 512.69, N = 3SE +/- 3890.46, N = 3SE +/- 436.19, N = 337927.0067210.0071525.0079881.00100561.00131764.00150337.00159810.00160053.00189623.00194581.00218747.00219557.43333535.00432278.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3Raspberry Pi 3 BODROID-C1+AML-S905X-CC Le PotatoRaspberry Pi 3 B+Pine64 1GBSocionext DeveloperboxBanana Pi M3Firefly ROC-RK3328-CCODROID-C2Tinker BoardJetson TX1Jetson TX2RockPro649K18K27K36K45KSE +/- 54.78, N = 3SE +/- 51.49, N = 3SE +/- 50.90, N = 3SE +/- 35.56, N = 3SE +/- 25.83, N = 3SE +/- 37.03, N = 3SE +/- 50.54, N = 3SE +/- 85.92, N = 3SE +/- 32.08, N = 3SE +/- 13.74, N = 3SE +/- 60.92, N = 3SE +/- 46.73, N = 3SE +/- 167.68, N = 3SE +/- 16.41, N = 3SE +/- 21.11, N = 3SE +/- 16.86, N = 3SE +/- 44.05, N = 3406803790729409293892434923773228762092320196193861599014030127759256634853575211

Hierarchical INTegration

This test runs the U.S. Department of Energy's Ames Laboratory Hierarchical INTegration (HINT) benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgQUIPs, More Is BetterHierarchical INTegration 1.0Test: FLOATALL-H3-CC H5ALL-H3-CC H2+ALL-H3-CC H3Raspberry Pi 2 BSocionext DeveloperboxRaspberry Pi 3 BPine64 1GBODROID-C1+Raspberry Pi 3 B+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCODROID-C2Banana Pi M3Tinker BoardJetson TX1RockPro64Jetson TX220M40M60M80M100MSE +/- 9829.94, N = 3SE +/- 1621.71, N = 3SE +/- 1696.71, N = 3SE +/- 113633.28, N = 3SE +/- 3286.77, N = 3SE +/- 73922.97, N = 3SE +/- 27122.74, N = 3SE +/- 359364.97, N = 3SE +/- 271590.74, N = 3SE +/- 7375.88, N = 3SE +/- 19531.90, N = 3SE +/- 19085.92, N = 3SE +/- 132627.22, N = 3SE +/- 3664.18, N = 3SE +/- 466387.18, N = 3SE +/- 9860994.78, N = 6SE +/- 187708.64, N = 334003720.0034637880.0034640333.0035952660.0044150376.0050009135.0050185204.0055729881.0057957193.0059121388.0061129612.0067673261.0067935371.0080755325.0088381313.0094934888.59103988087.001. (CC) gcc options: -O3 -march=native -lm

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteBanana Pi M3Raspberry Pi 2 BALL-H3-CC H5ALL-H3-CC H2+ALL-H3-CC H3ODROID-C1+Raspberry Pi 3 BPine64 1GBAML-S905X-CC Le PotatoSocionext DeveloperboxRaspberry Pi 3 B+Firefly ROC-RK3328-CCODROID-C2Tinker BoardRockPro64Jetson TX1Jetson TX230K60K90K120K150KSE +/- 84.14, N = 3SE +/- 141.51, N = 3SE +/- 7.80, N = 3SE +/- 26.01, N = 3SE +/- 27.36, N = 3SE +/- 82.63, N = 3SE +/- 58.48, N = 3SE +/- 17.90, N = 3SE +/- 52.26, N = 3SE +/- 16.44, N = 3SE +/- 65.58, N = 3SE +/- 238.66, N = 3SE +/- 287.89, N = 3SE +/- 222.05, N = 3SE +/- 9690.22, N = 6SE +/- 1075.34, N = 3SE +/- 871.71, N = 3182022083621324266222664234052344203698837855389224016553802591766639871304111979133175

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsRockPro64Raspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Raspberry Pi 3 BAML-S905X-CC Le PotatoPine64 1GBRaspberry Pi 3 B+Socionext DeveloperboxFirefly ROC-RK3328-CCODROID-C2Tinker BoardJetson TX1Jetson TX2306090120150SE +/- 25.10, N = 6SE +/- 1.28, N = 12SE +/- 0.78, N = 3SE +/- 1.30, N = 12SE +/- 1.24, N = 12SE +/- 0.83, N = 12SE +/- 1.07, N = 3SE +/- 0.94, N = 12SE +/- 0.83, N = 3SE +/- 1.49, N = 12SE +/- 0.01, N = 3SE +/- 0.91, N = 12SE +/- 1.18, N = 12SE +/- 0.68, N = 12SE +/- 0.67, N = 12SE +/- 0.20, N = 3152.5597.3291.8387.3777.1969.2357.1954.4152.6451.8446.3740.0438.9926.0623.6617.571. RockPro64: git version 2.19.02. Raspberry Pi 2 B: git version 2.11.03. ALL-H3-CC H2+: git version 2.17.14. ALL-H3-CC H3: git version 2.17.15. ALL-H3-CC H5: git version 2.11.06. ODROID-C1+: git version 2.7.47. Raspberry Pi 3 B: git version 2.11.08. AML-S905X-CC Le Potato: git version 2.11.09. Pine64 1GB: git version 2.7.410. Raspberry Pi 3 B+: git version 2.11.011. Socionext Developerbox: git version 2.17.112. Firefly ROC-RK3328-CC: git version 2.17.113. ODROID-C2: git version 2.17.114. Tinker Board: git version 2.11.015. Jetson TX1: git version 2.7.416. Jetson TX2: git version 2.7.4

Scikit-Learn

Scikit-learn is a Python module for machine learning Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.17.1Raspberry Pi 2 BALL-H3-CC H3ODROID-C1+ALL-H3-CC H5AML-S905X-CC Le PotatoSocionext DeveloperboxPine64 1GBRaspberry Pi 3 BRaspberry Pi 3 B+ODROID-C2Firefly ROC-RK3328-CCTinker BoardJetson TX1Banana Pi M35001000150020002500SE +/- 7.83, N = 3SE +/- 1.01, N = 3SE +/- 2.27, N = 3SE +/- 1.25, N = 3SE +/- 1.54, N = 3SE +/- 0.74, N = 3SE +/- 0.51, N = 3SE +/- 0.80, N = 3SE +/- 1.26, N = 3SE +/- 1.01, N = 3SE +/- 1.06, N = 3SE +/- 1.43, N = 3SE +/- 1.69, N = 3SE +/- 0.29, N = 32328224616311515954899853844785664650474434221

Tinymembench

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemcpySocionext DeveloperboxJetson TX2Jetson TX1ODROID-C1+Tinker BoardODROID-C2ALL-H3-CC H3Firefly ROC-RK3328-CCRaspberry Pi 3 B+ALL-H3-CC H2+ALL-H3-CC H5Raspberry Pi 3 BAML-S905X-CC Le Potato11223344551.296.918.1018.9426.4226.8130.4031.3232.3833.0833.4837.0746.561. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX2: $549.99 reported cost.3. Jetson TX1: $476.99 reported cost.4. ODROID-C1+: $49.00 reported cost.5. Tinker Board: $56.85 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. Firefly ROC-RK3328-CC: $50.00 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. ALL-H3-CC H2+: $25.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. Raspberry Pi 3 B: $34.99 reported cost.13. AML-S905X-CC Le Potato: $45.00 reported cost.

TTSIOD 3D Renderer

OpenBenchmarking.orgFPS Per Dollar, More Is BetterTTSIOD 3D Renderer 2.3bPerformance / Cost - Phong Rendering With Soft-Shadow MappingSocionext DeveloperboxJetson TX1ODROID-C1+ALL-H3-CC H5ALL-H3-CC H3ODROID-C2Raspberry Pi 3 B+ALL-H3-CC H2+AML-S905X-CC Le PotatoRaspberry Pi 3 BTinker Board0.11030.22060.33090.44120.55150.070.090.290.300.360.370.420.430.450.450.491. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. ODROID-C1+: $49.00 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ALL-H3-CC H3: $30.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Raspberry Pi 3 B+: $39.78 reported cost.8. ALL-H3-CC H2+: $25.00 reported cost.9. AML-S905X-CC Le Potato: $45.00 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Tinker Board: $56.85 reported cost.

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-07-28Performance / Cost - H.264 Video EncodingJetson TX1Socionext DeveloperboxODROID-C1+ALL-H3-CC H3Firefly ROC-RK3328-CCALL-H3-CC H2+ODROID-C2Raspberry Pi 3 B+Raspberry Pi 3 BTinker Board0.0180.0360.0540.0720.090.010.010.030.040.040.050.050.050.060.081. Jetson TX1: $476.99 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. ODROID-C1+: $49.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. ALL-H3-CC H2+: $25.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. Raspberry Pi 3 B+: $39.78 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Tinker Board: $56.85 reported cost.

7-Zip Compression

OpenBenchmarking.orgMIPS Per Dollar, More Is Better7-Zip Compression 16.02Performance / Cost - Compress Speed TestSocionext DeveloperboxJetson TX1Jetson TX2ODROID-C1+ALL-H3-CC H5ODROID-C2Firefly ROC-RK3328-CCALL-H3-CC H3Raspberry Pi 3 B+ALL-H3-CC H2+AML-S905X-CC Le PotatoRaspberry Pi 3 BTinker Board14284256707.819.4910.2730.1432.5334.9239.0239.9045.1546.4849.0953.2461.071. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ODROID-C1+: $49.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. ALL-H3-CC H3: $30.00 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. ALL-H3-CC H2+: $25.00 reported cost.11. AML-S905X-CC Le Potato: $45.00 reported cost.12. Raspberry Pi 3 B: $34.99 reported cost.13. Tinker Board: $56.85 reported cost.

C-Ray

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterC-Ray 1.1Performance / Cost - Total Time - 4K, 16 Rays Per PixelSocionext DeveloperboxJetson TX1Jetson TX2ODROID-C1+ALL-H3-CC H3ALL-H3-CC H5ALL-H3-CC H2+ODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 3 BAML-S905X-CC Le PotatoTinker Board100K200K300K400K500K469200.00405918.49371243.25133280.00124680.00123520.00104150.0096754.1588650.0082503.7282471.4378975.0059578.801. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ODROID-C1+: $49.00 reported cost.5. ALL-H3-CC H3: $30.00 reported cost.6. ALL-H3-CC H5: $40.00 reported cost.7. ALL-H3-CC H2+: $25.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Raspberry Pi 3 B: $34.99 reported cost.12. AML-S905X-CC Le Potato: $45.00 reported cost.13. Tinker Board: $56.85 reported cost.

Primesieve

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPrimesieve 7.1Performance / Cost - 1e12 Prime Number GenerationJetson TX1Socionext DeveloperboxODROID-C1+ALL-H3-CC H5ALL-H3-CC H3Raspberry Pi 3 BALL-H3-CC H2+Firefly ROC-RK3328-CCRaspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C240K80K120K160K200K191272.99159600.0077959.0064920.0058200.0053989.5749375.0046700.0044275.1440095.0037707.051. Jetson TX1: $476.99 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. ODROID-C1+: $49.00 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ALL-H3-CC H3: $30.00 reported cost.6. Raspberry Pi 3 B: $34.99 reported cost.7. ALL-H3-CC H2+: $25.00 reported cost.8. Firefly ROC-RK3328-CC: $50.00 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ODROID-C2: $62.95 reported cost.

AOBench

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterAOBenchPerformance / Cost - Size: 2048 x 2048 - Total TimeSocionext DeveloperboxJetson TX1Jetson TX2ODROID-C1+ALL-H3-CC H3ALL-H3-CC H5ALL-H3-CC H2+ODROID-C2Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoRaspberry Pi 3 BRaspberry Pi 3 B+Tinker Board100K200K300K400K500K480000.0078703.3573698.6622393.0021000.0019640.0017450.0016367.0014450.0012690.0011651.6711536.2010915.201. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ODROID-C1+: $49.00 reported cost.5. ALL-H3-CC H3: $30.00 reported cost.6. ALL-H3-CC H5: $40.00 reported cost.7. ALL-H3-CC H2+: $25.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. Raspberry Pi 3 B: $34.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Tinker Board: $56.85 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Socionext DeveloperboxJetson TX2Jetson TX1ODROID-C2ALL-H3-CC H5ODROID-C1+Firefly ROC-RK3328-CCALL-H3-CC H3AML-S905X-CC Le PotatoALL-H3-CC H2+Raspberry Pi 3 B+Raspberry Pi 3 BTinker Board200K400K600K800K1000K1117200.00250245.45210352.5951744.9048760.0047922.0042400.0041490.0036360.0035175.0034489.2632680.6632575.051. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX2: $549.99 reported cost.3. Jetson TX1: $476.99 reported cost.4. ODROID-C2: $62.95 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. ALL-H3-CC H3: $30.00 reported cost.9. AML-S905X-CC Le Potato: $45.00 reported cost.10. ALL-H3-CC H2+: $25.00 reported cost.11. Raspberry Pi 3 B+: $39.78 reported cost.12. Raspberry Pi 3 B: $34.99 reported cost.13. Tinker Board: $56.85 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACSocionext DeveloperboxJetson TX1Jetson TX2ALL-H3-CC H5ODROID-C1+ODROID-C2ALL-H3-CC H3AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCRaspberry Pi 3 BALL-H3-CC H2+Raspberry Pi 3 B+Tinker Board100K200K300K400K500K468912.0037615.4335831.8522655.2016867.2716573.4816122.6015058.3514668.5013544.2813431.7513368.866938.541. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Tinker Board: $56.85 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3Socionext DeveloperboxJetson TX1Jetson TX2ALL-H3-CC H5ODROID-C2ODROID-C1+ALL-H3-CC H3Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H2+Raspberry Pi 3 BRaspberry Pi 3 B+Tinker Board100K200K300K400K500K487668.0053966.6552749.5420740.4016795.0616219.4916098.6014810.0013543.2013397.5012339.5712012.768276.791. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. Firefly ROC-RK3328-CC: $50.00 reported cost.9. AML-S905X-CC Le Potato: $45.00 reported cost.10. ALL-H3-CC H2+: $25.00 reported cost.11. Raspberry Pi 3 B: $34.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Tinker Board: $56.85 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlSocionext DeveloperboxJetson TX1Jetson TX2ALL-H3-CC H5ODROID-C1+ODROID-C2ALL-H3-CC H3AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCALL-H3-CC H2+Raspberry Pi 3 BRaspberry Pi 3 B+Tinker Board4008001200160020001885.06286.53268.10103.0384.8570.4467.9867.2265.6856.8445.2944.4939.461. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. ALL-H3-CC H2+: $25.00 reported cost.11. Raspberry Pi 3 B: $34.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Tinker Board: $56.85 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterSocionext DeveloperboxJetson TX2Jetson TX1ALL-H3-CC H5ODROID-C1+ODROID-C2AML-S905X-CC Le PotatoRaspberry Pi 3 B+ALL-H3-CC H3Raspberry Pi 3 BFirefly ROC-RK3328-CCALL-H3-CC H2+Tinker Board2468107.915.431.130.420.400.350.350.300.300.290.260.250.241. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX2: $549.99 reported cost.3. Jetson TX1: $476.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. Raspberry Pi 3 B+: $39.78 reported cost.9. ALL-H3-CC H3: $30.00 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Firefly ROC-RK3328-CC: $50.00 reported cost.12. ALL-H3-CC H2+: $25.00 reported cost.13. Tinker Board: $56.85 reported cost.

PyBench

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesSocionext DeveloperboxJetson TX1Jetson TX2ALL-H3-CC H5ODROID-C1+AML-S905X-CC Le PotatoALL-H3-CC H3Raspberry Pi 3 BRaspberry Pi 3 B+ODROID-C2ALL-H3-CC H2+Firefly ROC-RK3328-CCTinker Board5M10M15M20M25M23263200.003027932.522946296.431627200.001164877.001029420.00881670.00851971.51832316.94804186.25735225.00701500.00526203.601. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ODROID-C1+: $49.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. Raspberry Pi 3 B: $34.99 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. ODROID-C2: $62.95 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. Firefly ROC-RK3328-CC: $50.00 reported cost.13. Tinker Board: $56.85 reported cost.

Hierarchical INTegration

OpenBenchmarking.orgQUIPs Per Dollar, More Is BetterHierarchical INTegration 1.0Performance / Cost - Test: FLOATSocionext DeveloperboxJetson TX1Jetson TX2ALL-H3-CC H5ODROID-C2ODROID-C1+ALL-H3-CC H3Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H2+Tinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+300K600K900K1200K1500K36791.98185289.66189072.69850093.001075031.951137344.511154677.771222592.241313808.621385515.201420498.241429240.781456943.011. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. Firefly ROC-RK3328-CC: $50.00 reported cost.9. AML-S905X-CC Le Potato: $45.00 reported cost.10. ALL-H3-CC H2+: $25.00 reported cost.11. Tinker Board: $56.85 reported cost.12. Raspberry Pi 3 B: $34.99 reported cost.13. Raspberry Pi 3 B+: $39.78 reported cost.

PHPBench

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteSocionext DeveloperboxJetson TX1Jetson TX2ALL-H3-CC H5ODROID-C1+AML-S905X-CC Le PotatoALL-H3-CC H3ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+ALL-H3-CC H2+Firefly ROC-RK3328-CCTinker Board3006009001200150032.44234.76242.14533.10694.94841.22888.07940.05983.711009.681064.881076.041167.951. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. ODROID-C1+: $49.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. Firefly ROC-RK3328-CC: $50.00 reported cost.13. Tinker Board: $56.85 reported cost.

Git

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGitPerformance / Cost - Time To Complete Common Git CommandsSocionext DeveloperboxJetson TX1Jetson TX2ODROID-C1+ALL-H3-CC H5ALL-H3-CC H3ODROID-C2AML-S905X-CC Le PotatoALL-H3-CC H2+Raspberry Pi 3 B+Firefly ROC-RK3328-CCRaspberry Pi 3 BTinker Board12K24K36K48K60K55644.0011285.589663.323392.273087.602621.102454.422448.452295.752062.202002.002001.081481.511. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ODROID-C1+: $49.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. ALL-H3-CC H3: $30.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H2+: $25.00 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Firefly ROC-RK3328-CC: $50.00 reported cost.12. Raspberry Pi 3 B: $34.99 reported cost.13. Tinker Board: $56.85 reported cost.

Scikit-Learn

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterScikit-Learn 0.17.1Performance / Cost -Socionext DeveloperboxJetson TX1ODROID-C1+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 3 BTinker Board200K400K600K800K1000K1078800.00207013.6679919.0067380.0060600.0042930.0041798.8032500.0031227.3029531.5626946.901. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. ODROID-C1+: $49.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. Firefly ROC-RK3328-CC: $50.00 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Tinker Board: $56.85 reported cost.

Redis

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: GETSocionext DeveloperboxJetson TX1Jetson TX2ALL-H3-CC H5AML-S905X-CC Le PotatoODROID-C1+ODROID-C2Firefly ROC-RK3328-CCTinker BoardRaspberry Pi 3 B+Raspberry Pi 3 B13002600390052006500196.431016.141201.501369.482287.843415.224313.695312.165740.566052.316089.371. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. ODROID-C1+: $49.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. Firefly ROC-RK3328-CC: $50.00 reported cost.9. Tinker Board: $56.85 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Raspberry Pi 3 B: $34.99 reported cost.

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: SETSocionext DeveloperboxJetson TX1Jetson TX2ALL-H3-CC H5AML-S905X-CC Le PotatoODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Firefly ROC-RK3328-CCTinker Board8001600240032004000133.38699.25785.97948.181589.442052.273091.043765.763779.213792.463847.791. Socionext Developerbox: $1200.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. ODROID-C1+: $49.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. Raspberry Pi 3 B: $34.99 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. Firefly ROC-RK3328-CC: $50.00 reported cost.11. Tinker Board: $56.85 reported cost.

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyJetson TX2Socionext DeveloperboxJetson TX1Firefly ROC-RK3328-CCODROID-C2ODROID-C1+AML-S905X-CC Le PotatoRaspberry Pi 3 B+Raspberry Pi 3 BTinker Board5010015020025026.2326.2633.7159.5496.25106.10122.27164.05189.77234.111. Jetson TX2: $549.99 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Jetson TX1: $476.99 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. Raspberry Pi 3 B+: $39.78 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Tinker Board: $56.85 reported cost.

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteJetson TX1Jetson TX2Socionext DeveloperboxRaspberry Pi 3 B+Firefly ROC-RK3328-CCODROID-C1+ODROID-C2Raspberry Pi 3 BAML-S905X-CC Le PotatoTinker Board5101520252.563.263.473.625.267.0411.4211.6913.4020.091. Jetson TX1: $476.99 reported cost.2. Jetson TX2: $549.99 reported cost.3. Socionext Developerbox: $1200.00 reported cost.4. Raspberry Pi 3 B+: $39.78 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. ODROID-C1+: $49.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. Raspberry Pi 3 B: $34.99 reported cost.9. AML-S905X-CC Le Potato: $45.00 reported cost.10. Tinker Board: $56.85 reported cost.

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:25 by user phoronix.

ALL-H3-CC H3

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 1024MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:20 by user root.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 4 September 2018 15:18 by user pi.

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 3 September 2018 15:59 by user pi.

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Testing initiated at 6 September 2018 11:59 by user pi.

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 3 September 2018 13:17 by user firefly.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 10 September 2018 14:01 by user ubuntu.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 28 August 2018 17:19 by user NVIDIA.

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 6 September 2018 14:27 by user odroid.

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 31 August 2018 13:22 by user odroid.

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 31 August 2018 21:03 by user ubuntu.

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 16:18 by user pi.

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 13:01 by user pi.

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 08:18 by user pi.

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 24 August 2018 10:16 by user phoronix.

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 16:13 by user linaro.

RockPro64

Processor: SiFive RISC-V @ 1.42GHz (6 Cores), Motherboard: Pine64 RockPro64, Memory: 4096MB, Disk: 2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32G, Monitor: LG TV

OS: Arch Linux ARM, Kernel: 4.18.0-rc8-1 (aarch64), Display Server: X Server 1.20.1, Compiler: GCC 8.2.0, File-System: ext4

Compiler Notes: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnu
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 3.7.0

Testing initiated at 17 September 2018 20:13 by user andreas.