Raspberry Pi Model 4 Benchmarks

HaB Ubuntu 18.04.3 (MATE DESKTOP)

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1908297-HV-1908263AS24
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Audio Encoding 2 Tests
C/C++ Compiler Tests 7 Tests
CPU Massive 8 Tests
Creator Workloads 5 Tests
Encoding 3 Tests
Multi-Core 5 Tests
Programmer / Developer System Benchmarks 2 Tests
Server 3 Tests
Server CPU Tests 4 Tests
Single-Threaded 7 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
RPi Model 3 B+
June 28 2019
  12 Hours, 20 Minutes
ASUS Tinker Board
July 01 2019
  3 Hours, 39 Minutes
Libre Board ALL-H3-CC H5
July 02 2019
  3 Hours, 34 Minutes
Firefly ROC-RK3328-CC
July 04 2019
  2 Hours, 14 Minutes
RPi Model 4 B 2GB
July 11 2019
  2 Hours, 24 Minutes
UP Squared
August 21 2019
  2 Hours, 1 Minute
Jetson Nano
August 26 2019
  1 Hour, 29 Minutes
Hardkernel ODROID-N2 4GB
August 29 2019
  1 Hour, 27 Minutes
Invert Hiding All Results Option
  3 Hours, 39 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

RPi Model 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 10, Kernel: 4.19.42-v7+ (armv7l), Display Server: X Server 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Libre Board ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

RPi Model 4 B 2GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 2048MB, Disk: 16GB SC16G, Graphics: V3D 4.2 2GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

UP Squared

Processor: Intel Celeron N3350 @ 2.40GHz (2 Cores), Motherboard: AAEON UP-APL01 (UPA1AM40 BIOS), Chipset: Intel Celeron N3350/Pentium, Memory: 2048MB, Disk: 31GB HBG4a2, Graphics: inteldrmfb (650MHz), Audio: Intel Celeron N3350/Pentium, Monitor: DELL P2415Q, Network: 2 x Realtek RTL8111/8168/8411

OS: Ubuntu 19.04, Kernel: 5.0.0-25-generic (x86_64), Desktop: GNOME Shell 3.32.2, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.16 + Python 3.7.3
Security Notes: l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Not affected + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline IBPB: conditional IBRS_FW STIBP: disabled RSB filling

Jetson Nano

Processor: ARMv8 Cortex-A57 @ 1.43GHz (4 Cores), Motherboard: jetson-nano, Memory: 4096MB, Disk: 32GB GB1QT, Graphics: NVIDIA TEGRA, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 18.04, Kernel: 4.9.140-tegra (aarch64), Desktop: Unity 7.5.0, Display Server: X Server 1.19.6, Display Driver: NVIDIA 1.0.0, Vulkan: 1.1.85, Compiler: GCC 7.4.0 + CUDA 10.0, File-System: ext4, Screen Resolution: 4096x4320

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: tegra-cpufreq schedutil
Python Notes: Python 2.7.15+ + Python 3.6.8

Hardkernel ODROID-N2 4GB

Processor: ARMv8 Cortex-A73 @ 1.90GHz (6 Cores), Motherboard: Hardkernel ODROID-N2, Memory: 4096MB, Disk: 31GB BJTD4R, Graphics: llvmpipe 4GB

OS: Ubuntu 18.04, Kernel: 4.9.187-53 (aarch64), Desktop: MATE 1.20.1, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 19.0.8 (LLVM 8.0 128 bits), Compiler: GCC 7.4.0 + Clang 6.0.0-1ubuntu2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: arm-big-little performance
Python Notes: Python 2.7.15+ + Python 3.6.8

Raspberry Pi Model 4 BenchmarksProcessorMotherboardMemoryDiskGraphicsMonitorChipsetAudioNetworkOSKernelDisplay ServerCompilerFile-SystemScreen ResolutionDesktopDisplay DriverOpenGLVulkanRPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 2GBUP SquaredJetson NanoHardkernel ODROID-N2 4GBARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3926MB32GB GB2MWBCM2708Raspbian 104.19.42-v7+ (armv7l)X Server 1.20.4GCC 8.3.0ext4656x416ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 201705161024x768ARMv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H5Raspbian 9.64.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CCUbuntu 18.044.4.114 (aarch64)X Server 1.18.4GCC 7.4.01024x768ARMv7 rev 3 @ 1.50GHz (4 Cores)BCM2835 Raspberry Pi 4 Model B Rev 1.116GB SC16GV3D 4.2 2GBDELL P2415QRaspbian 104.19.50-v7l+ (armv7l)LXDE 0.10.0X Server 1.20.4modesetting 1.20.42.1 Mesa 19.1.0-develGCC 8.3.0Intel Celeron N3350 @ 2.40GHz (2 Cores)AAEON UP-APL01 (UPA1AM40 BIOS)Intel Celeron N3350/Pentium31GB HBG4a2inteldrmfb (650MHz)Intel Celeron N3350/Pentium2 x Realtek RTL8111/8168/8411Ubuntu 19.045.0.0-25-generic (x86_64)GNOME Shell 3.32.21920x1080ARMv8 Cortex-A57 @ 1.43GHz (4 Cores)jetson-nano4096MB32GB GB1QTNVIDIA TEGRARealtek RTL8111/8168/8411Ubuntu 18.044.9.140-tegra (aarch64)Unity 7.5.0X Server 1.19.6NVIDIA 1.0.01.1.85GCC 7.4.0 + CUDA 10.04096x4320ARMv8 Cortex-A73 @ 1.90GHz (6 Cores)Hardkernel ODROID-N231GB BJTD4Rllvmpipe 4GB4.9.187-53 (aarch64)MATE 1.20.1modesetting 1.19.63.3 Mesa 19.0.8 (LLVM 8.0 128 bits)GCC 7.4.0 + Clang 6.0.0-1ubuntu21920x1080OpenBenchmarking.orgCompiler Details- RPi Model 3 B+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - ASUS Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v - Libre Board ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v - RPi Model 4 B 2GB: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - UP Squared: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Jetson Nano: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v - Hardkernel ODROID-N2 4GB: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v Processor Details- RPi Model 3 B+: Scaling Governor: BCM2835 Freq ondemand- ASUS Tinker Board: Scaling Governor: cpufreq-dt interactive- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- RPi Model 4 B 2GB: Scaling Governor: BCM2835 Freq ondemand- UP Squared: Scaling Governor: intel_pstate powersave- Jetson Nano: Scaling Governor: tegra-cpufreq schedutil- Hardkernel ODROID-N2 4GB: Scaling Governor: arm-big-little performancePython Details- RPi Model 3 B+: Python 2.7.16 + Python 3.7.3- ASUS Tinker Board: Python 2.7.13 + Python 3.5.3- Libre Board ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.7- RPi Model 4 B 2GB: Python 2.7.16 + Python 3.7.3- UP Squared: Python 2.7.16 + Python 3.7.3- Jetson Nano: Python 2.7.15+ + Python 3.6.8- Hardkernel ODROID-N2 4GB: Python 2.7.15+ + Python 3.6.8Security Details- UP Squared: l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Not affected + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline IBPB: conditional IBRS_FW STIBP: disabled RSB filling

RPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 2GBUP SquaredJetson NanoHardkernel ODROID-N2 4GBLogarithmic Result OverviewPhoronix Test SuiteSmallptLAME MP3 EncodingPerl BenchmarksSciMarkGraphicsMagickZstd CompressionFLAC Audio EncodingPyBenchPHPBench

Raspberry Pi Model 4 Benchmarksx264: H.264 Video Encodinggraphics-magick: Rotategraphics-magick: Resizingscimark2: Compositenginx: Static Web Page Servingphpbench: PHP Benchmark Suitepybench: Total For Average Test Timesrust-prime: Prime Number Test To 200,000,000smallpt: Global Illumination Renderer; 128 Samplescompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19encode-flac: WAV To FLACencode-mp3: WAV To MP3perl-benchmark: Pod2htmlperl-benchmark: InterpreterRPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 2GBUP SquaredJetson NanoHardkernel ODROID-N2 4GB0.14161548.802012.0620275296093106.15744.55787777.65658.822.565112780.031736533.326653141.723880.155945093121052.48273.30240135.25162.410.782542680.01229804242228.762134540683424.02402566.40518.492.572732500.010916882.31443651.135413113542140.20251.36343288.92295.441.316597610.004914474.916453143.025104.851006785233657.76145.50292111.48125.220.621362990.008260858869199.769218.062143393390286.17236.8134928.9781.740.430806590.003586835.259173125.481023807130149.14180.99143105.15143.170.709219830.0041564910.6610286175.13130472526573.2791.5216699.78113.940.479369400.00529321OpenBenchmarking.org

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-09-25H.264 Video EncodingHardkernel ODROID-N2 4GBJetson NanoRPi Model 4 B 2GBFirefly ROC-RK3328-CCASUS Tinker BoardRPi Model 3 B+3691215SE +/- 0.18, N = 3SE +/- 0.06, N = 6SE +/- 0.06, N = 3SE +/- 0.00, N = 3SE +/- 0.06, N = 12SE +/- 0.00, N = 310.665.254.912.313.320.141. (CC) gcc options: -ldl -lm -lpthread

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-09-25Performance / Cost - H.264 Video EncodingRPi Model 4 B 2GBFirefly ROC-RK3328-CCASUS Tinker Board0.02480.04960.07440.09920.1240.110.070.051. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. ASUS Tinker Board: $71 reported cost.

GraphicsMagick

OpenBenchmarking.orgIterations Per Minute Per Dollar, More Is BetterGraphicsMagick 1.3.30Performance / Cost - Operation: RotateRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+0.31950.6390.95851.2781.59751.421.260.690.930.461. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

OpenBenchmarking.orgIterations Per Minute Per Dollar, More Is BetterGraphicsMagick 1.3.30Performance / Cost - Operation: ResizingRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+0.26550.5310.79651.0621.32751.181.030.630.750.431. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: RotateHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+20406080100SE +/- 0.58, N = 3SE +/- 0.58, N = 3SE +/- 0.88, N = 3SE +/- 0.75, N = 910291886444246616-ljpeg -lXext -lSM -lICE -lX11-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lbz2 -lxml2-lSM -lICE -lX11-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: ResizingHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+20406080100SE +/- 0.55, N = 118673695336225315-ljpeg -lXext -lSM -lICE -lX11-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lbz2 -lxml2-lSM -lICE -lX11-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

SciMark

OpenBenchmarking.orgMflops Per Dollar, More Is BetterSciMark 2.0Performance / Cost - Computational Test: CompositeRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+0.71551.4312.14652.8623.57753.181.460.822.001.391. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: CompositeHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+4080120160200SE +/- 0.33, N = 3SE +/- 0.11, N = 3SE +/- 0.09, N = 3SE +/- 0.87, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.06, N = 3SE +/- 0.11, N = 3175.13125.48199.76143.0251.1328.76141.7248.801. (CC) gcc options: -lm

NGINX Benchmark

This is a test of ab, which is the Apache Benchmark program running against nginx. This test profile measures how many requests per second a given system can sustain when carrying out 2,000,000 requests with 500 requests being carried out concurrently. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterNGINX Benchmark 1.9.9Static Web Page ServingUP SquaredRPi Model 4 B 2GBASUS Tinker BoardRPi Model 3 B+2K4K6K8K10KSE +/- 123.14, N = 5SE +/- 4.09, N = 3SE +/- 35.02, N = 3SE +/- 7.80, N = 39218.065104.853880.152012.06-lcrypto-lcrypto-lcrypto1. (CC) gcc options: -lpthread -lcrypt -lz -O3 -march=native

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterNGINX Benchmark 1.9.9Performance / Cost - Static Web Page ServingRPi Model 4 B 2GBASUS Tinker BoardRPi Model 3 B+306090120150113.4454.6557.491. RPi Model 4 B 2GB: $45 reported cost.2. ASUS Tinker Board: $71 reported cost.3. RPi Model 3 B+: $35 reported cost.

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+50K100K150K200K250KSE +/- 405.91, N = 3SE +/- 856.92, N = 3SE +/- 128.52, N = 3SE +/- 519.36, N = 3SE +/- 53.78, N = 3SE +/- 16.22, N = 3SE +/- 993.16, N = 4SE +/- 53.36, N = 313047210238021433910067854131213455945020275

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+50010001500200025002237.291546.60609.86837.32579.291. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+9K18K27K36K45KSE +/- 2.52, N = 3SE +/- 71.88, N = 3SE +/- 10.37, N = 3SE +/- 15.60, N = 3SE +/- 186.40, N = 3SE +/- 24.84, N = 3SE +/- 81.94, N = 352657130339052331354240683931229609

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+300K600K900K1200K1500K235485.00473970.001423905.00661152.001036315.001. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

Rust Prime Benchmark

Based on petehunt/rust-benchmark, this is a prime number benchmark that is multi-threaded and written in Rustlang. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterRust Prime BenchmarkPrime Number Test To 200,000,000Hardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCASUS Tinker BoardRPi Model 3 B+7001400210028003500SE +/- 0.03, N = 3SE +/- 0.02, N = 3SE +/- 0.72, N = 3SE +/- 0.03, N = 3SE +/- 0.21, N = 3SE +/- 5.80, N = 3SE +/- 18.94, N = 373.27149.14286.17657.76140.201052.483106.15-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil1. (CC) gcc options: -pie -nodefaultlibs

Smallpt

Smallpt is a C++ global illumination renderer written in less than 100 lines of code. Global illumination is done via unbiased Monte Carlo path tracing and there is multi-threading support via the OpenMP library. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 128 SamplesHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+160320480640800SE +/- 0.12, N = 3SE +/- 0.23, N = 3SE +/- 0.61, N = 3SE +/- 1.73, N = 6SE +/- 1.61, N = 3SE +/- 0.66, N = 3SE +/- 1.48, N = 3SE +/- 0.52, N = 391.52180.99236.81145.50251.36424.02273.30744.551. (CXX) g++ options: -fopenmp -O3

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Hardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+2004006008001000SE +/- 3.40, N = 12SE +/- 2.36, N = 3SE +/- 5.17, N = 4SE +/- 1.74, N = 3SE +/- 0.30, N = 3SE +/- 7.90, N = 3SE +/- 0.46, N = 3SE +/- 1.73, N = 3166143349292343402240787-llzma-llzma-llzma-llzma-llzma1. (CC) gcc options: -O3 -pthread -lz

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+2004006008001000SE +/- 0.71, N = 5SE +/- 0.67, N = 5SE +/- 0.13, N = 5SE +/- 0.35, N = 5SE +/- 0.88, N = 5SE +/- 0.71, N = 5SE +/- 2.04, N = 5SE +/- 3.13, N = 599.78105.1528.97111.48288.92566.40135.25777.65-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3Hardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+140280420560700SE +/- 0.05, N = 3SE +/- 0.12, N = 3SE +/- 0.02, N = 3SE +/- 0.10, N = 3SE +/- 0.43, N = 3SE +/- 0.09, N = 3SE +/- 0.53, N = 3SE +/- 9.15, N = 3113.94143.1781.74125.22295.44518.49162.41658.82-lncurses1. (CC) gcc options: -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+0.57891.15781.73672.31562.8945SE +/- 0.00166496, N = 3SE +/- 0.00164789, N = 3SE +/- 0.00053558, N = 12SE +/- 0.00462631, N = 3SE +/- 0.01503227, N = 3SE +/- 0.00916360, N = 3SE +/- 0.00901113, N = 3SE +/- 0.04479638, N = 90.479369400.709219830.430806590.621362991.316597612.572732500.782542682.56511278

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterHardkernel ODROID-N2 4GBJetson NanoUP SquaredRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+0.00710.01420.02130.02840.0355SE +/- 0.00001898, N = 3SE +/- 0.00000540, N = 12SE +/- 0.00000415, N = 12SE +/- 0.00016552, N = 12SE +/- 0.00001338, N = 3SE +/- 0.00001867, N = 3SE +/- 0.00002723, N = 3SE +/- 0.00039106, N = 80.005293210.004156490.003586830.008260850.004914470.010916880.012298040.03173653

Rust Prime Benchmark

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterRust Prime BenchmarkPerformance / Cost - Prime Number Test To 200,000,000RPi Model 4 B 2GBFirefly ROC-RK3328-CCASUS Tinker BoardRPi Model 3 B+20K40K60K80K100K29599.204907.0074726.08108715.251. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. ASUS Tinker Board: $71 reported cost.4. RPi Model 3 B+: $35 reported cost.

Smallpt

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterSmallpt 1.0Performance / Cost - Global Illumination Renderer; 128 SamplesRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+6K12K18K24K30K6547.508797.6014840.7019404.3026059.251. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19RPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+6K12K18K24K30K13119.7512015.8514074.5517038.5827545.351. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+6K12K18K24K30K5016.6010112.2019824.009602.7527217.751. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3RPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+5K10K15K20K25K5634.9010340.4018147.1511531.1123058.701. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+2040608010027.9646.0890.0555.5689.781. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+0.24980.49960.74940.99921.2490.370.170.380.871.111. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

RPi Model 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 10, Kernel: 4.19.42-v7+ (armv7l), Display Server: X Server 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 28 June 2019 07:52 by user pi.

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 1 July 2019 13:20 by user linaro.

Libre Board ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 2 July 2019 12:42 by user pi.

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

Testing initiated at 4 July 2019 11:05 by user firefly.

RPi Model 4 B 2GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 2048MB, Disk: 16GB SC16G, Graphics: V3D 4.2 2GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 11 July 2019 20:46 by user pi.

UP Squared

Processor: Intel Celeron N3350 @ 2.40GHz (2 Cores), Motherboard: AAEON UP-APL01 (UPA1AM40 BIOS), Chipset: Intel Celeron N3350/Pentium, Memory: 2048MB, Disk: 31GB HBG4a2, Graphics: inteldrmfb (650MHz), Audio: Intel Celeron N3350/Pentium, Monitor: DELL P2415Q, Network: 2 x Realtek RTL8111/8168/8411

OS: Ubuntu 19.04, Kernel: 5.0.0-25-generic (x86_64), Desktop: GNOME Shell 3.32.2, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.16 + Python 3.7.3
Security Notes: l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Not affected + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline IBPB: conditional IBRS_FW STIBP: disabled RSB filling

Testing initiated at 21 August 2019 11:41 by user phoronix.

Jetson Nano

Processor: ARMv8 Cortex-A57 @ 1.43GHz (4 Cores), Motherboard: jetson-nano, Memory: 4096MB, Disk: 32GB GB1QT, Graphics: NVIDIA TEGRA, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 18.04, Kernel: 4.9.140-tegra (aarch64), Desktop: Unity 7.5.0, Display Server: X Server 1.19.6, Display Driver: NVIDIA 1.0.0, Vulkan: 1.1.85, Compiler: GCC 7.4.0 + CUDA 10.0, File-System: ext4, Screen Resolution: 4096x4320

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: tegra-cpufreq schedutil
Python Notes: Python 2.7.15+ + Python 3.6.8

Testing initiated at 26 August 2019 09:53 by user phoronix.

Hardkernel ODROID-N2 4GB

Processor: ARMv8 Cortex-A73 @ 1.90GHz (6 Cores), Motherboard: Hardkernel ODROID-N2, Memory: 4096MB, Disk: 31GB BJTD4R, Graphics: llvmpipe 4GB

OS: Ubuntu 18.04, Kernel: 4.9.187-53 (aarch64), Desktop: MATE 1.20.1, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 19.0.8 (LLVM 8.0 128 bits), Compiler: GCC 7.4.0 + Clang 6.0.0-1ubuntu2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: arm-big-little performance
Python Notes: Python 2.7.15+ + Python 3.6.8

Testing initiated at 29 August 2019 09:38 by user odroid.