Raspberry Pi 4 vs. Intel Comet Lake

AMD Athlon Silver 3050e

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 2012199-FI-2012165FI18
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Audio Encoding 2 Tests
Bioinformatics 2 Tests
Timed Code Compilation 4 Tests
C/C++ Compiler Tests 18 Tests
Compression Tests 2 Tests
CPU Massive 20 Tests
Creator Workloads 16 Tests
Cryptography 2 Tests
Encoding 2 Tests
HPC - High Performance Computing 6 Tests
Imaging 8 Tests
Common Kernel Benchmarks 2 Tests
Machine Learning 2 Tests
Multi-Core 13 Tests
OCR 2 Tests
Productivity 6 Tests
Programmer / Developer System Benchmarks 7 Tests
Python 4 Tests
Renderers 4 Tests
Scientific Computing 4 Tests
Server 4 Tests
Server CPU Tests 12 Tests
Single-Threaded 10 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Disable Color Branding
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
Raspberry Pi 4
July 29 2020
  13 Hours, 13 Minutes
Core i3 10100
July 30 2020
  2 Hours, 32 Minutes
Pentium Gold G6400
July 31 2020
  3 Hours, 3 Minutes
Celeron G5900
July 31 2020
  3 Hours, 32 Minutes
Lenovo M75n IoT_W10Pro
December 16 2020
  4 Hours, 18 Minutes
Lenovo M75n IOT_Ubuntu20.10
December 17 2020
  8 Hours, 24 Minutes
Invert Hiding All Results Option
  5 Hours, 50 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Raspberry Pi 4

Processor: ARMv7 Cortex-A72 @ 1.50GHz (4 Cores), Motherboard: BCM2711 Raspberry Pi 4 Model B Rev 1.1, Memory: 2048MB, Disk: 32GB SC32G, Graphics: V3D 4.2 2GB, Monitor: VA2431

OS: Raspbian 10, Kernel: 5.4.51-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.3.2, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1920x1080

Kernel Notes: snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1
Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Java Notes: OpenJDK Runtime Environment (build 11.0.8+10-post-Raspbian-1deb10u1)
Python Notes: Python 2.7.16 + Python 3.7.3

Core i3 10100

Processor: Intel Core i3-10100 @ 4.30GHz (4 Cores / 8 Threads), Motherboard: Gigabyte B460M DS3H (F2 BIOS), Chipset: Intel Device 9b63, Memory: 16GB, Disk: 500GB Western Digital WDS500G3X0C-00SJG0, Graphics: EFI VGA, Audio: Realtek ALC887-VD, Network: Realtek RTL8111/8168/8411

OS: Debian 10, Kernel: 4.19.0-9-amd64 (x86_64), Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave - CPU Microcode: 0xcc
Java Notes: OpenJDK Runtime Environment (build 11.0.8+10-post-Debian-1deb10u1)
Python Notes: Python 2.7.16 + Python 3.7.3
Security Notes: itlb_multihit: KVM: Mitigation of Split huge pages + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Enhanced IBRS IBPB: conditional RSB filling + srbds: Not affected + tsx_async_abort: Not affected

Pentium Gold G6400

Changed Processor to Intel Pentium Gold G6400 @ 4.00GHz (2 Cores / 4 Threads).

Changed Chipset to Intel Device 9b73.

Celeron G5900

Changed Processor to Intel Celeron G5900 @ 3.40GHz (2 Cores).

Lenovo M75n IoT_W10Pro

Processor: AMD Athlon Silver 3050e @ 1.40GHz (2 Cores / 4 Threads), Motherboard: LENOVO 3181 (M33KT1AA BIOS), Memory: 1 x 4096 MB 2400MHz 4ATF51264HZ-2G6E1, Disk: 238GB SAMSUNG MZVLB256HBHQ-000L7, Graphics: AMD Radeon Vega 3 512MB, Network: Realtek PCIe GbE + Intel Wireless-AC 9260 160MHz

OS: Microsoft Windows 10 Pro Build 19042, Kernel: 10.0 (x86_64), Display Driver: 27.20.11012.8005, OpenCL: OpenCL 2.1 AMD-APP (3075.12), Compiler: GCC 8.3.0, File-System: NTFS, Screen Resolution: 1920x1080

Java Notes: OpenJDK Runtime Environment 18.9 (build 11.0.6+10-LTS)
Python Notes: Python 3.7.1
Security Notes: __user pointer sanitization: Disabled + Retpoline: Full + IBPB: Always + STIBP: Enabled

Lenovo M75n IOT_Ubuntu20.10

Processor: AMD Athlon Silver 3050e @ 1.40GHz (2 Cores / 4 Threads), Motherboard: LENOVO 3181 (M33KT1AA BIOS), Chipset: AMD Raven/Raven2, Memory: 1 x 4096 MB DDR4-2667MT/s 4ATF51264HZ-2G6E1, Disk: 256GB SAMSUNG MZVLB256HBHQ-000L7, Graphics: AMD Picasso 512MB (1000/1200MHz), Audio: AMD Raven/Raven2/Fenghuang, Monitor: ONA24HB19T01, Network: Realtek RTL8111/8168/8411 + Intel-AC 9260

OS: Ubuntu 20.10, Kernel: 5.8.0-33-generic (x86_64), Desktop: GNOME Shell 3.38.1, Display Server: X Server 1.20.9, Display Driver: amdgpu 19.1.0, OpenGL: 4.6 Mesa 20.2.1 (LLVM 11.0.0), Vulkan: 1.2.131, Compiler: GCC 10.2.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none=/build/gcc-10-JvwpWM/gcc-10-10.2.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-10-JvwpWM/gcc-10-10.2.0/debian/tmp-gcn/usr,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: acpi-cpufreq ondemand - CPU Microcode: 0x8200103
Java Notes: OpenJDK Runtime Environment (build 11.0.9.1+1-Ubuntu-0ubuntu1.20.10)
Python Notes: Python 3.8.6
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: always-on RSB filling + srbds: Not affected + tsx_async_abort: Not affected

Raspberry Pi 4 vs. Intel Comet LakeProcessorMotherboardMemoryDiskGraphicsMonitorChipsetAudioNetworkOSKernelDesktopDisplay ServerDisplay DriverOpenGLCompilerFile-SystemScreen ResolutionOpenCLVulkanRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10ARMv7 Cortex-A72 @ 1.50GHz (4 Cores)BCM2711 Raspberry Pi 4 Model B Rev 1.12048MB32GB SC32GV3D 4.2 2GBVA2431Raspbian 105.4.51-v7l+ (armv7l)LXDE 0.10.0X Server 1.20.4modesetting 1.20.42.1 Mesa 19.3.2GCC 8.3.0ext41920x1080Intel Core i3-10100 @ 4.30GHz (4 Cores / 8 Threads)Gigabyte B460M DS3H (F2 BIOS)Intel Device 9b6316GB500GB Western Digital WDS500G3X0C-00SJG0EFI VGARealtek ALC887-VDRealtek RTL8111/8168/8411Debian 104.19.0-9-amd64 (x86_64)1024x768Intel Pentium Gold G6400 @ 4.00GHz (2 Cores / 4 Threads)Intel Device 9b73Intel Celeron G5900 @ 3.40GHz (2 Cores)AMD Athlon Silver 3050e @ 1.40GHz (2 Cores / 4 Threads)LENOVO 3181 (M33KT1AA BIOS)1 x 4096 MB 2400MHz 4ATF51264HZ-2G6E1238GB SAMSUNG MZVLB256HBHQ-000L7AMD Radeon Vega 3 512MBRealtek PCIe GbE + Intel Wireless-AC 9260 160MHzMicrosoft Windows 10 Pro Build 1904210.0 (x86_64)27.20.11012.8005OpenCL 2.1 AMD-APP (3075.12)NTFS1920x1080AMD Raven/Raven21 x 4096 MB DDR4-2667MT/s 4ATF51264HZ-2G6E1256GB SAMSUNG MZVLB256HBHQ-000L7AMD Picasso 512MB (1000/1200MHz)AMD Raven/Raven2/FenghuangONA24HB19T01Realtek RTL8111/8168/8411 + Intel-AC 9260Ubuntu 20.105.8.0-33-generic (x86_64)GNOME Shell 3.38.1X Server 1.20.9amdgpu 19.1.04.6 Mesa 20.2.1 (LLVM 11.0.0)1.2.131GCC 10.2.0ext4OpenBenchmarking.orgKernel Details- Raspberry Pi 4: snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1Compiler Details- Raspberry Pi 4: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - Core i3 10100: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Pentium Gold G6400: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Celeron G5900: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Lenovo M75n IOT_Ubuntu20.10: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none=/build/gcc-10-JvwpWM/gcc-10-10.2.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-10-JvwpWM/gcc-10-10.2.0/debian/tmp-gcn/usr,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v Processor Details- Raspberry Pi 4: Scaling Governor: cpufreq-dt ondemand- Core i3 10100: Scaling Governor: intel_pstate powersave - CPU Microcode: 0xcc- Pentium Gold G6400: Scaling Governor: intel_pstate powersave - CPU Microcode: 0xcc- Celeron G5900: Scaling Governor: intel_pstate powersave - CPU Microcode: 0xcc- Lenovo M75n IOT_Ubuntu20.10: Scaling Governor: acpi-cpufreq ondemand - CPU Microcode: 0x8200103Java Details- Raspberry Pi 4: OpenJDK Runtime Environment (build 11.0.8+10-post-Raspbian-1deb10u1)- Core i3 10100: OpenJDK Runtime Environment (build 11.0.8+10-post-Debian-1deb10u1)- Pentium Gold G6400: OpenJDK Runtime Environment (build 11.0.8+10-post-Debian-1deb10u1)- Celeron G5900: OpenJDK Runtime Environment (build 11.0.8+10-post-Debian-1deb10u1)- Lenovo M75n IoT_W10Pro: OpenJDK Runtime Environment 18.9 (build 11.0.6+10-LTS)- Lenovo M75n IOT_Ubuntu20.10: OpenJDK Runtime Environment (build 11.0.9.1+1-Ubuntu-0ubuntu1.20.10)Python Details- Raspberry Pi 4: Python 2.7.16 + Python 3.7.3- Core i3 10100: Python 2.7.16 + Python 3.7.3- Pentium Gold G6400: Python 2.7.16 + Python 3.7.3- Celeron G5900: Python 2.7.16 + Python 3.7.3- Lenovo M75n IoT_W10Pro: Python 3.7.1- Lenovo M75n IOT_Ubuntu20.10: Python 3.8.6Security Details- Core i3 10100: itlb_multihit: KVM: Mitigation of Split huge pages + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Enhanced IBRS IBPB: conditional RSB filling + srbds: Not affected + tsx_async_abort: Not affected - Pentium Gold G6400: itlb_multihit: KVM: Mitigation of Split huge pages + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Enhanced IBRS IBPB: conditional RSB filling + srbds: Not affected + tsx_async_abort: Not affected - Celeron G5900: itlb_multihit: KVM: Mitigation of Split huge pages + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Enhanced IBRS IBPB: conditional RSB filling + srbds: Not affected + tsx_async_abort: Not affected - Lenovo M75n IoT_W10Pro: __user pointer sanitization: Disabled + Retpoline: Full + IBPB: Always + STIBP: Enabled- Lenovo M75n IOT_Ubuntu20.10: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: always-on RSB filling + srbds: Not affected + tsx_async_abort: Not affected

Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10Result OverviewPhoronix Test Suite100%400%700%999%1299%XZ Compression7-Zip CompressionGraphicsMagickPHPBenchDaCapo BenchmarkSmallptPyBenchCoremarkLAME MP3 EncodingC-Raylibjpeg-turbo tjbenchTSCPAOBenchPyPerformanceFLAC Audio EncodingPerl Benchmarks

Raspberry Pi 4 vs. Intel Comet Laketscp: AI Chess Performancecompress-xz: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 9dacapobench: H2dacapobench: Jythondacapobench: Tradebeansencode-flac: WAV To FLACencode-mp3: WAV To MP3tjbench: Decompression Throughputtesseract-ocr: Time To OCR 7 Imagestesseract-ocr: Time To OCR 7 Imagestesseract-ocr: Time To OCR 7 Imageshugin: Panorama Photo Assistant + Stitching Timerawtherapee: Total Benchmark Timegegl: Cropgegl: Scalegegl: Cartoongegl: Reflectgegl: Antialiasgegl: Tile Glassgegl: Wavelet Blurgegl: Color Enhancegegl: Rotate 90 Degreesrsvg: SVG Files To PNGocrmypdf: Processing 60 Page PDF Documentocrmypdf: Processing 60 Page PDF Documentgimp: resizegimp: rotategimp: auto-levelsgimp: unsharp-maskgimp: resizegimp: rotategimp: auto-levelsgimp: unsharp-maskinkscape: SVG Files To PNGhmmer: Pfam Database Searchmafft: Multiple Sequence Alignmentscikit-learn: numpy: octave-benchmark: octave-benchmark: lammps: Rhodopsin Proteincoremark: CoreMark Size 666 - Iterations Per Secondaircrack-ng: build-gdb: Time To Compilebuild-mplayer: Time To Compilebuild-apache: Time To Compilecompress-7zip: Compress Speed Testbuild-php: Time To Compileaobench: 2048 x 2048 - Total Timegraphics-magick: Swirlgraphics-magick: Rotategraphics-magick: Sharpengraphics-magick: Enhancedgraphics-magick: Resizinggraphics-magick: Noise-Gaussiangraphics-magick: HWB Color Spacec-ray: Total Time - 4K, 16 Rays Per Pixelttsiod-renderer: Phong Rendering With Soft-Shadow Mappingsmallpt: Global Illumination Renderer; 128 Sampleslibreoffice: 20 Documents To PDFpyperformance: 2to3pyperformance: floatpyperformance: pathlibpyperformance: json_loadspyperformance: regex_compilepyperformance: python_startupopenssl: RSA 4096-bit Performancephpbench: PHP Benchmark Suitesqlite-speedtest: Timed Time - Size 1,000perl-benchmark: Pod2htmlperl-benchmark: Interpreterpolybench-c: Covariance Computationpolybench-c: Correlation Computationpolybench-c: 3 Matrix Multiplicationspybench: Total For Average Test TimesRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10350771416.907143853436721087109.37141.58749.657148136.504471.413748.02250.87436.875647.54814.988214.859161.312326.606341.548246.61877.222376.4284.5764.3894.2914.345137.21253.88922.51479.11226.54100.3890.49933030.5571081162.347970.537543.837180.7533466638.584123.69234851516481683680.08025.4479130.1805.7511.7962914214496242.597.6102546766.5500.614976600.0071441331.01531.02124.9105235137625842.488314641518.4208.122205.77783625.01068.367104.1088.5275.478105.90031.14040.70130.74462.37259.44141.73413.55144.3478.72817.59920.78024.96824.3477.4383.85527.067375.556.1673.219179882.44238615519.073118.87469.21824.4442750088.57832.74718711346092437117933157.068262.09722.8027.51030495.717.923.61677.491253.272984554.2460.108729120.001088943.338945126849269.3073375548241359.4568.667172.92858430.87196.509147.9779.5096.236117.13433.53847.34133.04368.47864.27647.59213.87889.36210.64818.87823.19826.37125.71912.8466.59329.554336.126.6051.65788892.0974272812.615178.803128.70137.11615033143.93535.179941057304524655519322.191132.55646.4538.06432810419.525.51807.96389.366854065.1500.118844980.000758723.83210201078690123.8833616608411.10810.181147.20926554.798140.394213.38310.8937.229137.54439.43156.74138.37379.50475.07056.29316.452121.32613.14722.12527.68531.52930.61619.5799.41734.693282.427.6331.38153412.2819822346.783274.528198.33554.7427920220.07641.54665873253719739419400.34876.439874.5859.73939712323.630.12129.8315.056883782.0150.140058050.001015312.1682.1704.4461199618371197.4697277180761352815.07917.119109.047122114.17146082.245699599497.441451947217721125529.475134.0291.2341848882.259462.71246600.531204830.025531824221619358223.4698475199241567718.06215.88896.08257860.025216.096370.98317.28916.275175.17865.89886.46560.610108.098104.58093.06944.248176.11935.88628.92338.02841.03145.43250.929114.6818.3170.92234830.3761801565.311838.912515.444143.1954860540.94863.0404431013189227169669.48654.6706115.48718.29290432550.859.746219.1183.2276629183.2480.393270380.002055686.4986.4447.6792340OpenBenchmarking.org

TSCP

This is a performance test of TSCP, Tom Kerrigan's Simple Chess Program, which has a built-in performance benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgNodes Per Second, More Is BetterTSCP 1.81AI Chess PerformanceRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10300K600K900K1200K1500KSE +/- 362.49, N = 5SE +/- 686.80, N = 5SE +/- 1093.69, N = 5SE +/- 843.80, N = 5SE +/- 3407.97, N = 5SE +/- 3712.45, N = 53507711376258126849210786906183716193581. (CC) gcc options: -O3 -march=native

XZ Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using XZ compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterXZ Compression 5.2.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 9Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.1090180270360450SE +/- 0.92, N = 3SE +/- 0.07, N = 3SE +/- 0.17, N = 3SE +/- 0.06, N = 3SE +/- 0.09, N = 3SE +/- 0.81, N = 3405.9242.4969.31123.88197.47223.471. (CC) gcc options: -pthread -fvisibility=hidden -O2

DaCapo Benchmark

This test runs the DaCapo Benchmarks written in Java and intended to test system/CPU performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgmsec, Fewer Is BetterDaCapo Benchmark 9.12-MR1Java Test: H2Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.103K6K9K12K15KSE +/- 124.43, N = 20SE +/- 45.90, N = 16SE +/- 73.27, N = 20SE +/- 49.34, N = 4SE +/- 157.22, N = 20SE +/- 384.46, N = 161438531463375361672778475

OpenBenchmarking.orgmsec, Fewer Is BetterDaCapo Benchmark 9.12-MR1Java Test: JythonRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.107K14K21K28K35KSE +/- 338.03, N = 4SE +/- 28.94, N = 4SE +/- 74.01, N = 20SE +/- 53.74, N = 4SE +/- 263.66, N = 4SE +/- 60.82, N = 4343674151548260841807619924

OpenBenchmarking.orgmsec, Fewer Is BetterDaCapo Benchmark 9.12-MR1Java Test: TradebeansRaspberry Pi 4Pentium Gold G6400Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.105K10K15K20K25KSE +/- 73.12, N = 4SE +/- 178.83, N = 20SE +/- 122.22, N = 42108741351352815677

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.1020406080100SE +/- 0.529, N = 5SE +/- 0.009, N = 5SE +/- 0.004, N = 5SE +/- 0.004, N = 5SE +/- 0.045, N = 5SE +/- 0.060, N = 5109.3718.4209.45611.10815.07918.0621. (CXX) g++ options: -O2 -fvisibility=hidden -logg -lm

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10918273645SE +/- 0.040, N = 3SE +/- 0.006, N = 3SE +/- 0.001, N = 3SE +/- 0.009, N = 3SE +/- 0.146, N = 3SE +/- 0.064, N = 341.5878.1228.66710.18117.11915.888-lncurses1. (CC) gcc options: -O3 -ffast-math -funroll-loops -fschedule-insns2 -fbranch-count-reg -fforce-addr -pipe -lm

libjpeg-turbo tjbench

tjbench is a JPEG decompression/compression benchmark part of libjpeg-turbo. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMegapixels/sec, More Is Betterlibjpeg-turbo tjbench 2.0.2Test: Decompression ThroughputRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.1050100150200250SE +/- 0.11, N = 3SE +/- 0.45, N = 3SE +/- 0.53, N = 3SE +/- 0.89, N = 3SE +/- 0.28, N = 3SE +/- 0.23, N = 349.66205.78172.93147.21109.0596.08-lm-lm1. (CC) gcc options: -O3 -rdynamic

Tesseract OCR

Tesseract-OCR is the open-source optical character recognition (OCR) engine for the conversion of text within images to raw text output. This test profile relies upon a system-supplied Tesseract installation. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTesseract OCR 4.0.0Time To OCR 7 ImagesRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900306090120150SE +/- 0.11, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3136.5025.0130.8754.80

OpenBenchmarking.orgSeconds, Fewer Is BetterTesseract OCR 4.1.1Time To OCR 7 ImagesLenovo M75n IOT_Ubuntu20.101428425670SE +/- 0.25, N = 360.39

OpenBenchmarking.orgSeconds, Fewer Is BetterTesseract OCR v4.0.0.20181030Time To OCR 7 ImagesLenovo M75n IoT_W10Pro306090120150SE +/- 0.04, N = 3114.17

Hugin

Hugin is an open-source, cross-platform panorama photo stitcher software package. This test profile times how long it takes to run the assistant and panorama photo stitching on a set of images. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterHuginPanorama Photo Assistant + Stitching TimeRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10100200300400500SE +/- 1.15, N = 3SE +/- 0.22, N = 3SE +/- 0.31, N = 3SE +/- 0.19, N = 3SE +/- 0.85, N = 3471.4168.3796.51140.39216.10

RawTherapee

RawTherapee is a cross-platform, open-source multi-threaded RAW image processing program. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterRawTherapeeTotal Benchmark TimeRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10160320480640800SE +/- 1.42, N = 3SE +/- 0.02, N = 3SE +/- 0.00, N = 3SE +/- 0.09, N = 3SE +/- 0.28, N = 3748.02104.11147.98213.38370.981. Raspberry Pi 4: RawTherapee, version 5.5, command line. An advanced, cross-platform program for developing raw photos. Website: http://www.rawtherapee.com/ Documentation: http://rawpedia.rawtherapee.com/ Forum: https://discuss.pixls.us/c/software/rawtherapee Code and bug reports: https://github.com/Beep6581/RawTherapee Symbols: <Chevrons> indicate parameters you can change. [Square brackets] mean the parameter is optional. The pipe symbol | indicates a choice of one or the other. The dash symbol - denotes a range of possible values from one to the other. Usage: rawtherapee-cli -c <dir>|<files> Convert files in batch with default parameters. rawtherapee-cli <other options> -c <dir>|<files> Convert files in batch with your own settings. Options: rawtherapee-cli[-o <output>|-O <output>] [-q] [-a] [-s|-S] [-p <one.pp3> [-p <two.pp3> ...] ] [-d] [ -j[1-100] -js<1-3> | -t[z] -b<8|16|16f|32> | -n -b<8|16> ] [-Y] [-f] -c <input> -c <files> Specify one or more input files or folders. When specifying folders, Rawtherapee will look for image file types which comply with the selected extensions (see also '-a'). -c must be the last option. -o <file>|<dir> Set output file or folder. Saves output file alongside input file if -o is not specified. -O <file>|<dir> Set output file or folder and copy pp3 file into it. Saves output file alongside input file if -O is not specified. -q Quick-start mode. Does not load cached files to speedup start time. -a Process all supported image file types when specifying a folder, even those not currently selected in Preferences > File Browser > Parsed Extensions. -s Use the existing sidecar file to build the processing parameters, e.g. for photo.raw there should be a photo.raw.pp3 file in the same folder. If the sidecar file does not exist, neutral values will be used. -S Like -s but skip if the sidecar file does not exist. -p <file.pp3> Specify processing profile to be used for all conversions. You can specify as many sets of "-p <file.pp3>" options as you like, each will be built on top of the previous one, as explained below. -d Use the default raw or non-raw processing profile as set in Preferences > Image Processing > Default Processing Profile -j[1-100] Specify output to be JPEG (default, if -t and -n are not set). Optionally, specify compression 1-100 (default value: 92). -js<1-3> Specify the JPEG chroma subsampling parameter, where: 1 = Best compression: 2x2, 1x1, 1x1 (4:2:0) Chroma halved vertically and horizontally. 2 = Balanced (default): 2x1, 1x1, 1x1 (4:2:2) Chroma halved horizontally. 3 = Best quality: 1x1, 1x1, 1x1 (4:4:4) No chroma subsampling. -b<8|16|16f|32> Specify bit depth per channel. 8 = 8-bit integer. Applies to JPEG, PNG and TIFF. Default for JPEG and PNG. 16 = 16-bit integer. Applies to TIFF and PNG. Default for TIFF. 16f = 16-bit float. Applies to TIFF. 32 = 32-bit float. Applies to TIFF. -t[z] Specify output to be TIFF. Uncompressed by default, or deflate compression with 'z'. -n Specify output to be compressed PNG. Compression is hard-coded to PNG_FILTER_PAETH, Z_RLE. -Y Overwrite output if present. -f Use the custom fast-export processing pipeline. Your pp3 files can be incomplete, RawTherapee will build the final values as follows: 1- A new processing profile is created using neutral values, 2- If the "-d" option is set, the values are overridden by those found in the default raw or non-raw processing profile. 3- If one or more "-p" options are set, the values are overridden by those found in these processing profiles. 4- If the "-s" or "-S" options are set, the values are finally overridden by those found in the sidecar files. The processing profiles are processed in the order specified on the command line. 2. Core i3 10100: RawTherapee, version 5.5, command line. An advanced, cross-platform program for developing raw photos. Website: http://www.rawtherapee.com/ Documentation: http://rawpedia.rawtherapee.com/ Forum: https://discuss.pixls.us/c/software/rawtherapee Code and bug reports: https://github.com/Beep6581/RawTherapee Symbols: <Chevrons> indicate parameters you can change. [Square brackets] mean the parameter is optional. The pipe symbol | indicates a choice of one or the other. The dash symbol - denotes a range of possible values from one to the other. Usage: rawtherapee-cli -c <dir>|<files> Convert files in batch with default parameters. rawtherapee-cli <other options> -c <dir>|<files> Convert files in batch with your own settings. Options: rawtherapee-cli[-o <output>|-O <output>] [-q] [-a] [-s|-S] [-p <one.pp3> [-p <two.pp3> ...] ] [-d] [ -j[1-100] -js<1-3> | -t[z] -b<8|16|16f|32> | -n -b<8|16> ] [-Y] [-f] -c <input> -c <files> Specify one or more input files or folders. When specifying folders, Rawtherapee will look for image file types which comply with the selected extensions (see also '-a'). -c must be the last option. -o <file>|<dir> Set output file or folder. Saves output file alongside input file if -o is not specified. -O <file>|<dir> Set output file or folder and copy pp3 file into it. Saves output file alongside input file if -O is not specified. -q Quick-start mode. Does not load cached files to speedup start time. -a Process all supported image file types when specifying a folder, even those not currently selected in Preferences > File Browser > Parsed Extensions. -s Use the existing sidecar file to build the processing parameters, e.g. for photo.raw there should be a photo.raw.pp3 file in the same folder. If the sidecar file does not exist, neutral values will be used. -S Like -s but skip if the sidecar file does not exist. -p <file.pp3> Specify processing profile to be used for all conversions. You can specify as many sets of "-p <file.pp3>" options as you like, each will be built on top of the previous one, as explained below. -d Use the default raw or non-raw processing profile as set in Preferences > Image Processing > Default Processing Profile -j[1-100] Specify output to be JPEG (default, if -t and -n are not set). Optionally, specify compression 1-100 (default value: 92). -js<1-3> Specify the JPEG chroma subsampling parameter, where: 1 = Best compression: 2x2, 1x1, 1x1 (4:2:0) Chroma halved vertically and horizontally. 2 = Balanced (default): 2x1, 1x1, 1x1 (4:2:2) Chroma halved horizontally. 3 = Best quality: 1x1, 1x1, 1x1 (4:4:4) No chroma subsampling. -b<8|16|16f|32> Specify bit depth per channel. 8 = 8-bit integer. Applies to JPEG, PNG and TIFF. Default for JPEG and PNG. 16 = 16-bit integer. Applies to TIFF and PNG. Default for TIFF. 16f = 16-bit float. Applies to TIFF. 32 = 32-bit float. Applies to TIFF. -t[z] Specify output to be TIFF. Uncompressed by default, or deflate compression with 'z'. -n Specify output to be compressed PNG. Compression is hard-coded to PNG_FILTER_PAETH, Z_RLE. -Y Overwrite output if present. -f Use the custom fast-export processing pipeline. Your pp3 files can be incomplete, RawTherapee will build the final values as follows: 1- A new processing profile is created using neutral values, 2- If the "-d" option is set, the values are overridden by those found in the default raw or non-raw processing profile. 3- If one or more "-p" options are set, the values are overridden by those found in these processing profiles. 4- If the "-s" or "-S" options are set, the values are finally overridden by those found in the sidecar files. The processing profiles are processed in the order specified on the command line. 3. Pentium Gold G6400: RawTherapee, version 5.5, command line. An advanced, cross-platform program for developing raw photos. Website: http://www.rawtherapee.com/ Documentation: http://rawpedia.rawtherapee.com/ Forum: https://discuss.pixls.us/c/software/rawtherapee Code and bug reports: https://github.com/Beep6581/RawTherapee Symbols: <Chevrons> indicate parameters you can change. [Square brackets] mean the parameter is optional. The pipe symbol | indicates a choice of one or the other. The dash symbol - denotes a range of possible values from one to the other. Usage: rawtherapee-cli -c <dir>|<files> Convert files in batch with default parameters. rawtherapee-cli <other options> -c <dir>|<files> Convert files in batch with your own settings. Options: rawtherapee-cli[-o <output>|-O <output>] [-q] [-a] [-s|-S] [-p <one.pp3> [-p <two.pp3> ...] ] [-d] [ -j[1-100] -js<1-3> | -t[z] -b<8|16|16f|32> | -n -b<8|16> ] [-Y] [-f] -c <input> -c <files> Specify one or more input files or folders. When specifying folders, Rawtherapee will look for image file types which comply with the selected extensions (see also '-a'). -c must be the last option. -o <file>|<dir> Set output file or folder. Saves output file alongside input file if -o is not specified. -O <file>|<dir> Set output file or folder and copy pp3 file into it. Saves output file alongside input file if -O is not specified. -q Quick-start mode. Does not load cached files to speedup start time. -a Process all supported image file types when specifying a folder, even those not currently selected in Preferences > File Browser > Parsed Extensions. -s Use the existing sidecar file to build the processing parameters, e.g. for photo.raw there should be a photo.raw.pp3 file in the same folder. If the sidecar file does not exist, neutral values will be used. -S Like -s but skip if the sidecar file does not exist. -p <file.pp3> Specify processing profile to be used for all conversions. You can specify as many sets of "-p <file.pp3>" options as you like, each will be built on top of the previous one, as explained below. -d Use the default raw or non-raw processing profile as set in Preferences > Image Processing > Default Processing Profile -j[1-100] Specify output to be JPEG (default, if -t and -n are not set). Optionally, specify compression 1-100 (default value: 92). -js<1-3> Specify the JPEG chroma subsampling parameter, where: 1 = Best compression: 2x2, 1x1, 1x1 (4:2:0) Chroma halved vertically and horizontally. 2 = Balanced (default): 2x1, 1x1, 1x1 (4:2:2) Chroma halved horizontally. 3 = Best quality: 1x1, 1x1, 1x1 (4:4:4) No chroma subsampling. -b<8|16|16f|32> Specify bit depth per channel. 8 = 8-bit integer. Applies to JPEG, PNG and TIFF. Default for JPEG and PNG. 16 = 16-bit integer. Applies to TIFF and PNG. Default for TIFF. 16f = 16-bit float. Applies to TIFF. 32 = 32-bit float. Applies to TIFF. -t[z] Specify output to be TIFF. Uncompressed by default, or deflate compression with 'z'. -n Specify output to be compressed PNG. Compression is hard-coded to PNG_FILTER_PAETH, Z_RLE. -Y Overwrite output if present. -f Use the custom fast-export processing pipeline. Your pp3 files can be incomplete, RawTherapee will build the final values as follows: 1- A new processing profile is created using neutral values, 2- If the "-d" option is set, the values are overridden by those found in the default raw or non-raw processing profile. 3- If one or more "-p" options are set, the values are overridden by those found in these processing profiles. 4- If the "-s" or "-S" options are set, the values are finally overridden by those found in the sidecar files. The processing profiles are processed in the order specified on the command line. 4. Celeron G5900: RawTherapee, version 5.5, command line. An advanced, cross-platform program for developing raw photos. Website: http://www.rawtherapee.com/ Documentation: http://rawpedia.rawtherapee.com/ Forum: https://discuss.pixls.us/c/software/rawtherapee Code and bug reports: https://github.com/Beep6581/RawTherapee Symbols: <Chevrons> indicate parameters you can change. [Square brackets] mean the parameter is optional. The pipe symbol | indicates a choice of one or the other. The dash symbol - denotes a range of possible values from one to the other. Usage: rawtherapee-cli -c <dir>|<files> Convert files in batch with default parameters. rawtherapee-cli <other options> -c <dir>|<files> Convert files in batch with your own settings. Options: rawtherapee-cli[-o <output>|-O <output>] [-q] [-a] [-s|-S] [-p <one.pp3> [-p <two.pp3> ...] ] [-d] [ -j[1-100] -js<1-3> | -t[z] -b<8|16|16f|32> | -n -b<8|16> ] [-Y] [-f] -c <input> -c <files> Specify one or more input files or folders. When specifying folders, Rawtherapee will look for image file types which comply with the selected extensions (see also '-a'). -c must be the last option. -o <file>|<dir> Set output file or folder. Saves output file alongside input file if -o is not specified. -O <file>|<dir> Set output file or folder and copy pp3 file into it. Saves output file alongside input file if -O is not specified. -q Quick-start mode. Does not load cached files to speedup start time. -a Process all supported image file types when specifying a folder, even those not currently selected in Preferences > File Browser > Parsed Extensions. -s Use the existing sidecar file to build the processing parameters, e.g. for photo.raw there should be a photo.raw.pp3 file in the same folder. If the sidecar file does not exist, neutral values will be used. -S Like -s but skip if the sidecar file does not exist. -p <file.pp3> Specify processing profile to be used for all conversions. You can specify as many sets of "-p <file.pp3>" options as you like, each will be built on top of the previous one, as explained below. -d Use the default raw or non-raw processing profile as set in Preferences > Image Processing > Default Processing Profile -j[1-100] Specify output to be JPEG (default, if -t and -n are not set). Optionally, specify compression 1-100 (default value: 92). -js<1-3> Specify the JPEG chroma subsampling parameter, where: 1 = Best compression: 2x2, 1x1, 1x1 (4:2:0) Chroma halved vertically and horizontally. 2 = Balanced (default): 2x1, 1x1, 1x1 (4:2:2) Chroma halved horizontally. 3 = Best quality: 1x1, 1x1, 1x1 (4:4:4) No chroma subsampling. -b<8|16|16f|32> Specify bit depth per channel. 8 = 8-bit integer. Applies to JPEG, PNG and TIFF. Default for JPEG and PNG. 16 = 16-bit integer. Applies to TIFF and PNG. Default for TIFF. 16f = 16-bit float. Applies to TIFF. 32 = 32-bit float. Applies to TIFF. -t[z] Specify output to be TIFF. Uncompressed by default, or deflate compression with 'z'. -n Specify output to be compressed PNG. Compression is hard-coded to PNG_FILTER_PAETH, Z_RLE. -Y Overwrite output if present. -f Use the custom fast-export processing pipeline. Your pp3 files can be incomplete, RawTherapee will build the final values as follows: 1- A new processing profile is created using neutral values, 2- If the "-d" option is set, the values are overridden by those found in the default raw or non-raw processing profile. 3- If one or more "-p" options are set, the values are overridden by those found in these processing profiles. 4- If the "-s" or "-S" options are set, the values are finally overridden by those found in the sidecar files. The processing profiles are processed in the order specified on the command line. 5. Lenovo M75n IOT_Ubuntu20.10: RawTherapee, version 5.8, command line.

GEGL

GEGL is the Generic Graphics Library and is the library/framework used by GIMP and other applications like GNOME Photos. This test profile times how long it takes to complete various GEGL operations on a static set of sample JPEG images. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: CropRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.101122334455SE +/- 0.677, N = 4SE +/- 0.046, N = 3SE +/- 0.082, N = 3SE +/- 0.071, N = 3SE +/- 0.151, N = 350.8748.5279.50910.89317.289

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: ScaleRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10816243240SE +/- 0.098, N = 3SE +/- 0.034, N = 3SE +/- 0.047, N = 3SE +/- 0.003, N = 3SE +/- 0.042, N = 336.8755.4786.2367.22916.275

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: CartoonRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10140280420560700SE +/- 3.12, N = 3SE +/- 0.16, N = 3SE +/- 0.23, N = 3SE +/- 0.10, N = 3SE +/- 1.60, N = 3647.55105.90117.13137.54175.18

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: ReflectRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.101530456075SE +/- 0.06, N = 3SE +/- 0.07, N = 3SE +/- 0.04, N = 3SE +/- 0.06, N = 3SE +/- 0.41, N = 314.9931.1433.5439.4365.90

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: AntialiasRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1050100150200250SE +/- 0.66, N = 3SE +/- 0.03, N = 3SE +/- 0.12, N = 3SE +/- 0.02, N = 3SE +/- 1.04, N = 15214.8640.7047.3456.7486.47

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: Tile GlassRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.104080120160200SE +/- 1.11, N = 3SE +/- 0.04, N = 3SE +/- 0.11, N = 3SE +/- 0.02, N = 3SE +/- 0.12, N = 3161.3130.7433.0438.3760.61

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: Wavelet BlurRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1070140210280350SE +/- 1.27, N = 3SE +/- 0.09, N = 3SE +/- 0.13, N = 3SE +/- 0.01, N = 3SE +/- 0.11, N = 3326.6162.3768.4879.50108.10

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: Color EnhanceRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1070140210280350SE +/- 1.03, N = 3SE +/- 0.02, N = 3SE +/- 0.05, N = 3SE +/- 0.06, N = 3SE +/- 0.20, N = 3341.5559.4464.2875.07104.58

OpenBenchmarking.orgSeconds, Fewer Is BetterGEGLOperation: Rotate 90 DegreesRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1050100150200250SE +/- 0.40, N = 3SE +/- 0.05, N = 3SE +/- 0.11, N = 3SE +/- 0.03, N = 3SE +/- 0.83, N = 3246.6241.7347.5956.2993.07

librsvg

RSVG/librsvg is an SVG vector graphics library. This test profile times how long it takes to complete various operations by rsvg-convert. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterlibrsvgOperation: SVG Files To PNGRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1020406080100SE +/- 0.99, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.09, N = 377.2213.5513.8816.4544.251. Raspberry Pi 4: rsvg-convert version 2.44.102. Core i3 10100: rsvg-convert version 2.44.103. Pentium Gold G6400: rsvg-convert version 2.44.104. Celeron G5900: rsvg-convert version 2.44.105. Lenovo M75n IOT_Ubuntu20.10: rsvg-convert version 2.50.1

OCRMyPDF

OCRMyPDF is an optical character recognition (OCR) text layer to scanned PDF files, producing new PDFs with the text now selectable/searchable/copy-paste capable. OCRMyPDF leverages the Tesseract OCR engine and is written in Python. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterOCRMyPDF 8.0.1+dfsgProcessing 60 Page PDF DocumentRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G590080160240320400SE +/- 0.63, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.08, N = 3376.4344.3589.36121.33

OpenBenchmarking.orgSeconds, Fewer Is BetterOCRMyPDF 10.3.1+dfsgProcessing 60 Page PDF DocumentLenovo M75n IOT_Ubuntu20.104080120160200SE +/- 1.42, N = 3176.12

GIMP

GIMP is an open-source image manipulaton program. This test profile will use the system-provided GIMP program otherwise on Windows relys upon a pre-packaged Windows binary from upstream GIMP.org. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.8Test: resizeRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G59003691215SE +/- 0.274, N = 15SE +/- 0.027, N = 3SE +/- 0.009, N = 3SE +/- 0.132, N = 34.5768.72810.64813.147

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.8Test: rotateRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900510152025SE +/- 0.105, N = 14SE +/- 0.005, N = 3SE +/- 0.019, N = 3SE +/- 0.007, N = 34.38917.59918.87822.125

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.8Test: auto-levelsRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900714212835SE +/- 0.013, N = 3SE +/- 0.063, N = 3SE +/- 0.008, N = 3SE +/- 0.012, N = 34.29120.78023.19827.685

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.8Test: unsharp-maskRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900714212835SE +/- 0.048, N = 3SE +/- 0.016, N = 3SE +/- 0.014, N = 3SE +/- 0.013, N = 34.34524.96826.37131.529

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.18Test: resizeLenovo M75n IOT_Ubuntu20.10816243240SE +/- 0.61, N = 335.89

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.18Test: rotateLenovo M75n IOT_Ubuntu20.10714212835SE +/- 0.46, N = 328.92

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.18Test: auto-levelsLenovo M75n IOT_Ubuntu20.10918273645SE +/- 0.58, N = 338.03

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.18Test: unsharp-maskLenovo M75n IOT_Ubuntu20.10918273645SE +/- 0.38, N = 1041.03

Inkscape

Inkscape is an open-source vector graphics editor. This test profile times how long it takes to complete various operations by Inkscape. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterInkscapeOperation: SVG Files To PNGRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900306090120150SE +/- 0.66, N = 3SE +/- 0.01, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3137.2124.3525.7230.621. Inkscape 0.92.4 (5da689c313, 2019-01-14)

Timed HMMer Search

This test searches through the Pfam database of profile hidden markov models. The search finds the domain structure of Drosophila Sevenless protein. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed HMMer Search 2.3.2Pfam Database SearchRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.101224364860SE +/- 0.423, N = 3SE +/- 0.064, N = 3SE +/- 0.070, N = 3SE +/- 0.023, N = 3SE +/- 0.021, N = 353.8897.43812.84619.57945.4321. (CC) gcc options: -O2 -pthread -lhmmer -lsquid -lm

Timed MAFFT Alignment

This test performs an alignment of 100 pyruvate decarboxylase sequences. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed MAFFT Alignment 7.392Multiple Sequence AlignmentRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900510152025SE +/- 0.195, N = 12SE +/- 0.066, N = 15SE +/- 0.044, N = 3SE +/- 0.022, N = 322.5143.8556.5939.4171. (CC) gcc options: -std=c99 -O3 -lm -lpthread

Scikit-Learn

Scikit-learn is a Python module for machine learning Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.22.1Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1020406080100SE +/- 0.20, N = 3SE +/- 0.04, N = 3SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.27, N = 379.1127.0729.5534.6950.93

Numpy Benchmark

This is a test to obtain the general Numpy performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterNumpy BenchmarkRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1080160240320400SE +/- 0.02, N = 3SE +/- 0.43, N = 3SE +/- 0.12, N = 3SE +/- 0.59, N = 3SE +/- 0.16, N = 326.54375.55336.12282.42114.68

GNU Octave Benchmark

This test profile measures how long it takes to complete several reference GNU Octave files via octave-benchmark. GNU Octave is used for numerical computations and is an open-source alternative to MATLAB. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGNU Octave Benchmark 4.4.1Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G590020406080100SE +/- 0.206, N = 5SE +/- 0.011, N = 5SE +/- 0.034, N = 5SE +/- 0.032, N = 5100.3896.1676.6057.633

OpenBenchmarking.orgSeconds, Fewer Is BetterGNU Octave Benchmark 5.2.0Lenovo M75n IOT_Ubuntu20.10510152025SE +/- 0.03, N = 518.32

LAMMPS Molecular Dynamics Simulator

LAMMPS is a classical molecular dynamics code, and an acronym for Large-scale Atomic/Molecular Massively Parallel Simulator. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgns/day, More Is BetterLAMMPS Molecular Dynamics Simulator 9Jan2020Model: Rhodopsin ProteinRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.100.72431.44862.17292.89723.6215SE +/- 0.001, N = 3SE +/- 0.007, N = 3SE +/- 0.006, N = 3SE +/- 0.006, N = 3SE +/- 0.004, N = 30.4993.2191.6571.3810.922-fopenmp-fopenmp-fopenmp-fopenmp1. (CXX) g++ options: -O3 -rdynamic -ljpeg -lpng -lz -lfftw3 -lm

Coremark

This is a test of EEMBC CoreMark processor benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgIterations/Sec, More Is BetterCoremark 1.0CoreMark Size 666 - Iterations Per SecondRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.1040K80K120K160K200KSE +/- 7.97, N = 3SE +/- 1165.70, N = 3SE +/- 969.55, N = 3SE +/- 21.42, N = 3SE +/- 104.64, N = 3SE +/- 215.58, N = 333030.56179882.4488892.1053412.2846082.2534830.381. (CC) gcc options: -O2 -lrt" -lrt

Aircrack-ng

Aircrack-ng is a tool for assessing WiFi/WLAN network security. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgk/s, More Is BetterAircrack-ng 1.5.2Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.103K6K9K12K15KSE +/- 3.70, N = 3SE +/- 38.97, N = 3SE +/- 4.55, N = 3SE +/- 0.27, N = 3SE +/- 13.64, N = 31162.3515519.072812.622346.781565.31-masm=intel-masm=intel1. (CXX) g++ options: -O3 -fvisibility=hidden -fcommon -rdynamic -lpthread -lz -lcrypto -lhwloc -ldl -lm -pthread

Timed GDB GNU Debugger Compilation

This test times how long it takes to build the GNU Debugger (GDB) in a default configuration. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed GDB GNU Debugger Compilation 9.1Time To CompileRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.102004006008001000SE +/- 12.43, N = 3SE +/- 0.20, N = 3SE +/- 0.11, N = 3SE +/- 0.17, N = 3SE +/- 45.54, N = 9982.91118.87178.80274.53838.91

Timed MPlayer Compilation

This test times how long it takes to build the MPlayer open-source media player program. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed MPlayer Compilation 1.4Time To CompileRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10120240360480600SE +/- 0.09, N = 3SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.06, N = 3SE +/- 1.53, N = 3543.8469.22128.70198.34515.44

Timed Apache Compilation

This test times how long it takes to build the Apache HTTPD web server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed Apache Compilation 2.4.41Time To CompileRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.104080120160200SE +/- 0.64, N = 3SE +/- 0.03, N = 3SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.09, N = 3180.7524.4437.1254.74143.20

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.106K12K18K24K30KSE +/- 2.60, N = 3SE +/- 193.55, N = 3SE +/- 17.03, N = 3SE +/- 25.67, N = 3SE +/- 6.36, N = 3SE +/- 25.08, N = 3346627500150337920599448601. (CXX) g++ options: -pipe -lpthread

Timed PHP Compilation

This test times how long it takes to build PHP 7. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed PHP Compilation 7.4.2Time To CompileRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10140280420560700SE +/- 0.21, N = 3SE +/- 0.11, N = 3SE +/- 0.07, N = 3SE +/- 0.33, N = 3SE +/- 1.47, N = 3636.5288.58143.94220.08540.95

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10306090120150SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.51, N = 5SE +/- 0.65, N = 3SE +/- 0.93, N = 3123.6932.7535.1841.5597.4463.041. (CC) gcc options: -lm -O3

GraphicsMagick

This is a test of GraphicsMagick with its OpenMP implementation that performs various imaging tests on a sample 6000x4000 pixel JPEG image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.33Operation: SwirlRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.104080120160200SE +/- 0.33, N = 3SE +/- 2.67, N = 3SE +/- 1.14, N = 123418794654544-lfreetype -lbz2-lSM -lICE-lSM -lICE-lSM -lICE-lSM -lICE1. (CC) gcc options: -fopenmp -O2 -pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma -lxml2 -lz -lm -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.33Operation: RotateRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.102004006008001000SE +/- 15.04, N = 4SE +/- 0.33, N = 3SE +/- 3.84, N = 3SE +/- 0.88, N = 38511341057873194310-lfreetype -lbz2-lSM -lICE-lSM -lICE-lSM -lICE-lSM -lICE1. (CC) gcc options: -fopenmp -O2 -pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma -lxml2 -lz -lm -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.33Operation: SharpenRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10132639526515603025713-lfreetype -lbz2-lSM -lICE-lSM -lICE-lSM -lICE-lSM -lICE1. (CC) gcc options: -fopenmp -O2 -pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma -lxml2 -lz -lm -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.33Operation: EnhancedRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.1020406080100169245372118-lfreetype -lbz2-lSM -lICE-lSM -lICE-lSM -lICE-lSM -lICE1. (CC) gcc options: -fopenmp -O2 -pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma -lxml2 -lz -lm -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.33Operation: ResizingRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.1090180270360450SE +/- 0.88, N = 3SE +/- 0.58, N = 3SE +/- 0.33, N = 3484372461977792-lfreetype -lbz2-lSM -lICE-lSM -lICE-lSM -lICE-lSM -lICE1. (CC) gcc options: -fopenmp -O2 -pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma -lxml2 -lz -lm -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.33Operation: Noise-GaussianRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10306090120150SE +/- 1.07, N = 151611755392127-lfreetype -lbz2-lSM -lICE-lSM -lICE-lSM -lICE-lSM -lICE1. (CC) gcc options: -fopenmp -O2 -pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma -lxml2 -lz -lm -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.33Operation: HWB Color SpaceRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.102004006008001000SE +/- 0.88, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 383933519419125169-lfreetype -lbz2-lSM -lICE-lSM -lICE-lSM -lICE-lSM -lICE1. (CC) gcc options: -fopenmp -O2 -pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma -lxml2 -lz -lm -lpthread

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10150300450600750SE +/- 9.85, N = 9SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.02, N = 3SE +/- 0.46, N = 3SE +/- 0.63, N = 3680.08157.07322.19400.35529.48669.491. (CC) gcc options: -lm -lpthread -O3

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1060120180240300SE +/- 0.10, N = 3SE +/- 0.40, N = 3SE +/- 0.66, N = 3SE +/- 0.12, N = 3SE +/- 0.12, N = 325.45262.10132.5676.4454.67-msse -mrecip -mfpmath=sse -msse2 -mssse3-msse -mrecip -mfpmath=sse -msse2 -mssse3-msse -mrecip -mfpmath=sse -msse2 -mssse3-msse -mrecip -mfpmath=sse -msse2 -mssse31. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

Smallpt

Smallpt is a C++ global illumination renderer written in less than 100 lines of code. Global illumination is done via unbiased Monte Carlo path tracing and there is multi-threading support via the OpenMP library. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 128 SamplesRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10306090120150SE +/- 1.07, N = 3SE +/- 0.01, N = 3SE +/- 0.03, N = 3SE +/- 0.02, N = 3SE +/- 0.24, N = 3SE +/- 0.30, N = 3130.1822.8046.4574.59134.03115.491. (CXX) g++ options: -fopenmp -O3

LibreOffice

Various benchmarking operations with the LibreOffice open-source office suite. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLibreOfficeTest: 20 Documents To PDFRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10510152025SE +/- 0.090, N = 5SE +/- 0.052, N = 5SE +/- 0.078, N = 5SE +/- 0.193, N = 55.7517.5108.0649.73918.2921. Raspberry Pi 4: LibreOffice 6.1.5.2 10(Build:2)2. Core i3 10100: LibreOffice 6.1.5.2 10(Build:2)3. Pentium Gold G6400: LibreOffice 6.1.5.2 10(Build:2)4. Celeron G5900: LibreOffice 6.1.5.2 10(Build:2)5. Lenovo M75n IOT_Ubuntu20.10: LibreOffice 7.0.3.1 00(Build:1)

PyPerformance

PyPerformance is the reference Python performance benchmark suite. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyPerformance 1.0.0Benchmark: 2to3Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.102004006008001000SE +/- 0.00, N = 3SE +/- 0.07, N = 10SE +/- 0.67, N = 31.79304.00328.00397.001.23904.00

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyPerformance 1.0.0Benchmark: floatRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10140280420560700SE +/- 0.06, N = 3SE +/- 1.67, N = 3629.095.7104.0123.0418.0325.0

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyPerformance 1.0.0Benchmark: pathlibRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10110220330440550SE +/- 0.00, N = 3SE +/- 0.03, N = 3SE +/- 0.00, N = 3SE +/- 30.37, N = 12SE +/- 0.18, N = 3142.017.919.523.6488.050.8

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyPerformance 1.0.0Benchmark: json_loadsRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10306090120150SE +/- 0.58, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.09, N = 3SE +/- 0.21, N = 3144.023.625.530.182.259.7

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyPerformance 1.0.0Benchmark: regex_compileRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.102004006008001000SE +/- 0.58, N = 3SE +/- 0.88, N = 3962167180212594462

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyPerformance 1.0.0Benchmark: python_startupRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.101428425670SE +/- 0.03, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 2.83, N = 15SE +/- 0.00, N = 342.507.497.969.8062.7019.10

OpenSSL

OpenSSL is an open-source toolkit that implements SSL (Secure Sockets Layer) and TLS (Transport Layer Security) protocols. This test measures the RSA 4096-bit performance of OpenSSL. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSigns Per Second, More Is BetterOpenSSL 1.1.1RSA 4096-bit PerformanceRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.1030060090012001500SE +/- 0.03, N = 3SE +/- 2.27, N = 3SE +/- 0.13, N = 3SE +/- 1.05, N = 3SE +/- 0.64, N = 397.61253.2389.3315.0183.2-m64-m64-m64-m641. (CC) gcc options: -pthread -O3 -lssl -lcrypto -ldl

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.10160K320K480K640K800KSE +/- 299.00, N = 3SE +/- 388.23, N = 3SE +/- 1130.88, N = 3SE +/- 406.11, N = 3SE +/- 62.01, N = 3SE +/- 424.68, N = 3102546729845668540568837124660276629

SQLite Speedtest

This is a benchmark of SQLite's speedtest1 benchmark program with an increased problem size of 1,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterSQLite Speedtest 3.30Timed Time - Size 1,000Raspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10170340510680850SE +/- 2.25, N = 3SE +/- 0.18, N = 3SE +/- 0.85, N = 3SE +/- 0.02, N = 3SE +/- 0.09, N = 3766.5554.2565.1582.02183.251. (CC) gcc options: -O2 -ldl -lz -lpthread

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.100.13840.27680.41520.55360.692SE +/- 0.00185361, N = 3SE +/- 0.00010435, N = 3SE +/- 0.00029058, N = 3SE +/- 0.00027382, N = 3SE +/- 0.00276737, N = 3SE +/- 0.00050757, N = 30.614976600.108729120.118844980.140058050.531204830.39327038

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.100.00570.01140.01710.02280.0285SE +/- 0.00012453, N = 12SE +/- 0.00006172, N = 15SE +/- 0.00000105, N = 3SE +/- 0.00000210, N = 3SE +/- 0.00131578, N = 12SE +/- 0.00001132, N = 30.007144130.001088940.000758720.001015310.025531820.00205568

PolyBench-C

PolyBench-C is a C-language polyhedral benchmark suite made at the Ohio State University. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPolyBench-C 4.2Test: Covariance ComputationRaspberry Pi 4Celeron G5900Lenovo M75n IOT_Ubuntu20.10714212835SE +/- 0.012, N = 3SE +/- 0.004, N = 3SE +/- 0.033, N = 331.0152.1686.4981. (CC) gcc options: -O3 -march=native

OpenBenchmarking.orgSeconds, Fewer Is BetterPolyBench-C 4.2Test: Correlation ComputationRaspberry Pi 4Celeron G5900Lenovo M75n IOT_Ubuntu20.10714212835SE +/- 0.010, N = 3SE +/- 0.005, N = 3SE +/- 0.041, N = 331.0212.1706.4441. (CC) gcc options: -O3 -march=native

OpenBenchmarking.orgSeconds, Fewer Is BetterPolyBench-C 4.2Test: 3 Matrix MultiplicationsRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IOT_Ubuntu20.10612182430SE +/- 0.006, N = 3SE +/- 0.003, N = 3SE +/- 0.003, N = 3SE +/- 0.003, N = 3SE +/- 0.030, N = 324.9103.3383.8324.4467.6791. (CC) gcc options: -O3 -march=native

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesRaspberry Pi 4Core i3 10100Pentium Gold G6400Celeron G5900Lenovo M75n IoT_W10ProLenovo M75n IOT_Ubuntu20.1011002200330044005500SE +/- 6.69, N = 3SE +/- 2.73, N = 3SE +/- 3.21, N = 3SE +/- 8.50, N = 3SE +/- 4.67, N = 352359451020119942212340

Raspberry Pi 4

Processor: ARMv7 Cortex-A72 @ 1.50GHz (4 Cores), Motherboard: BCM2711 Raspberry Pi 4 Model B Rev 1.1, Memory: 2048MB, Disk: 32GB SC32G, Graphics: V3D 4.2 2GB, Monitor: VA2431

OS: Raspbian 10, Kernel: 5.4.51-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.3.2, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1920x1080

Kernel Notes: snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1
Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Java Notes: OpenJDK Runtime Environment (build 11.0.8+10-post-Raspbian-1deb10u1)
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 29 July 2020 23:56 by user pi.

Core i3 10100

Processor: Intel Core i3-10100 @ 4.30GHz (4 Cores / 8 Threads), Motherboard: Gigabyte B460M DS3H (F2 BIOS), Chipset: Intel Device 9b63, Memory: 16GB, Disk: 500GB Western Digital WDS500G3X0C-00SJG0, Graphics: EFI VGA, Audio: Realtek ALC887-VD, Network: Realtek RTL8111/8168/8411

OS: Debian 10, Kernel: 4.19.0-9-amd64 (x86_64), Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave - CPU Microcode: 0xcc
Java Notes: OpenJDK Runtime Environment (build 11.0.8+10-post-Debian-1deb10u1)
Python Notes: Python 2.7.16 + Python 3.7.3
Security Notes: itlb_multihit: KVM: Mitigation of Split huge pages + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Enhanced IBRS IBPB: conditional RSB filling + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 30 July 2020 21:01 by user phoronix.

Pentium Gold G6400

Processor: Intel Pentium Gold G6400 @ 4.00GHz (2 Cores / 4 Threads), Motherboard: Gigabyte B460M DS3H (F2 BIOS), Chipset: Intel Device 9b73, Memory: 16GB, Disk: 500GB Western Digital WDS500G3X0C-00SJG0, Graphics: EFI VGA, Audio: Realtek ALC887-VD, Network: Realtek RTL8111/8168/8411

OS: Debian 10, Kernel: 4.19.0-9-amd64 (x86_64), Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave - CPU Microcode: 0xcc
Java Notes: OpenJDK Runtime Environment (build 11.0.8+10-post-Debian-1deb10u1)
Python Notes: Python 2.7.16 + Python 3.7.3
Security Notes: itlb_multihit: KVM: Mitigation of Split huge pages + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Enhanced IBRS IBPB: conditional RSB filling + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 31 July 2020 10:49 by user phoronix.

Celeron G5900

Processor: Intel Celeron G5900 @ 3.40GHz (2 Cores), Motherboard: Gigabyte B460M DS3H (F2 BIOS), Chipset: Intel Device 9b73, Memory: 16GB, Disk: 500GB Western Digital WDS500G3X0C-00SJG0, Graphics: EFI VGA, Audio: Realtek ALC887-VD, Network: Realtek RTL8111/8168/8411

OS: Debian 10, Kernel: 4.19.0-9-amd64 (x86_64), Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave - CPU Microcode: 0xcc
Java Notes: OpenJDK Runtime Environment (build 11.0.8+10-post-Debian-1deb10u1)
Python Notes: Python 2.7.16 + Python 3.7.3
Security Notes: itlb_multihit: KVM: Mitigation of Split huge pages + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Enhanced IBRS IBPB: conditional RSB filling + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 31 July 2020 14:22 by user phoronix.

Lenovo M75n IoT_W10Pro

Processor: AMD Athlon Silver 3050e @ 1.40GHz (2 Cores / 4 Threads), Motherboard: LENOVO 3181 (M33KT1AA BIOS), Memory: 1 x 4096 MB 2400MHz 4ATF51264HZ-2G6E1, Disk: 238GB SAMSUNG MZVLB256HBHQ-000L7, Graphics: AMD Radeon Vega 3 512MB, Network: Realtek PCIe GbE + Intel Wireless-AC 9260 160MHz

OS: Microsoft Windows 10 Pro Build 19042, Kernel: 10.0 (x86_64), Display Driver: 27.20.11012.8005, OpenCL: OpenCL 2.1 AMD-APP (3075.12), Compiler: GCC 8.3.0, File-System: NTFS, Screen Resolution: 1920x1080

Java Notes: OpenJDK Runtime Environment 18.9 (build 11.0.6+10-LTS)
Python Notes: Python 3.7.1
Security Notes: __user pointer sanitization: Disabled + Retpoline: Full + IBPB: Always + STIBP: Enabled

Testing initiated at 16 December 2020 10:20 by user edwaleni.

Lenovo M75n IOT_Ubuntu20.10

Processor: AMD Athlon Silver 3050e @ 1.40GHz (2 Cores / 4 Threads), Motherboard: LENOVO 3181 (M33KT1AA BIOS), Chipset: AMD Raven/Raven2, Memory: 1 x 4096 MB DDR4-2667MT/s 4ATF51264HZ-2G6E1, Disk: 256GB SAMSUNG MZVLB256HBHQ-000L7, Graphics: AMD Picasso 512MB (1000/1200MHz), Audio: AMD Raven/Raven2/Fenghuang, Monitor: ONA24HB19T01, Network: Realtek RTL8111/8168/8411 + Intel-AC 9260

OS: Ubuntu 20.10, Kernel: 5.8.0-33-generic (x86_64), Desktop: GNOME Shell 3.38.1, Display Server: X Server 1.20.9, Display Driver: amdgpu 19.1.0, OpenGL: 4.6 Mesa 20.2.1 (LLVM 11.0.0), Vulkan: 1.2.131, Compiler: GCC 10.2.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none=/build/gcc-10-JvwpWM/gcc-10-10.2.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-10-JvwpWM/gcc-10-10.2.0/debian/tmp-gcn/usr,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: acpi-cpufreq ondemand - CPU Microcode: 0x8200103
Java Notes: OpenJDK Runtime Environment (build 11.0.9.1+1-Ubuntu-0ubuntu1.20.10)
Python Notes: Python 3.8.6
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: always-on RSB filling + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 17 December 2020 09:28 by user root.